Direct Electrochemistry of Cytochrome c on EDTA-ZrO2 Organic-inorganic Hybrid Film Modified ElectrodesState Key Laborator3.＂ of Chemo／Biosensing and Chemometrics, Hunan Universit3; Changsha. Hunan 410082. China

A composite film of ethylenediamine tetraacetic acid (EDTA)‐ZrO₂ organic‐inorganic hybrid was prepared based on the chelation between Zr(IV) and EDTA. The direct electrochemical behavior of cytochrome c (cyt. c) at the hybrid film modified glassy carbon electrodes was investigated. The immobilized EDTA can promote the redox of heme in horse heart cyt. c which gives rise to a pair of reversible redox peaks with a formal potential of 40 mV (vs. SCE). The peak current increased linearly with the increase of cyt. c concentration in the range of 1.6 × 10^?6—8.0 × 10^?5 mol·L^?1 with the correlation coefficient of 0.996. Further investigation shows that metal ions can impede the electron transfer of cyt. c. The impediment capability of metal ions depends on their coordination capability with EDTA and their valence number.     

Synthesis of monodispersed organic-inorganic hybrid spheres

This paper describes the attempt to prepare a new group of monodispersed silica-polymer hybrid particles, which consists of silica and amide polymer: poly(vinylpyrrolidone) (PVP) and poly(2-ethyloxazoline) (POXZ). Preparation method is based on the growth of hybrid seeds by the addition of TEOS-polymer solution.Monodispersed PVP-silica hybrid particles of 1.24 µm in diameter were prepared by growing the hybrid seeds of 0.54 µm by the addition of TEOS-PVP solution with ammonia catalyst. In the case of POXZ-silica particles, addition of TEOS-POXZ solution to the solution containing 0.54 µm seeds resulted in monodispersed POXZ-silica hybrid particles and four times repetition of the addition for particle growth gave the hybrid particles of the diameter of 1.6 µm.Improvement of mechanical properties of hybrid particles was observed when the particles were heated at 100 200°C.     

Hydrothermal Synthesis and Structural Characterization of a Novel Organic—Inorganic Hybrid Compound {[Cu（2,2′—bpy）2]2—Mo8O26}

A novel organic-inorganic hybrid compound {[Cu(2,2′-bpy)2]2Mo8O26} has been hydrothermally synthesized and structurally characterized by single-crystal X-ray diffraction. The compound crystallizes in the orthorhombic space group, Pna21,with a=2.4164(5),b=1.8281(4),c=1.1877(2)nm,V=5.247(2)nm^3,Z=4,and final R1=0.0331,wR2=0.0727.The structure consists of discrete {[Cu(2,2′-bpy)2]2Mo8O26} clusters,constructed from a β-octamolybdate subunit[Mo8O26]^4- covalently bonded to two [Cu(2,2′-bpy)2]^2 coordination complex cations via bridging oxo groups.In addition,the spectroscopic properties and thernal behavior of this compound have been investigated by spectroscopic techniques (UV-vis,IR,Raman and EPR spectra) and TG analysis.     

Ni(phen)(H2O)(V2O6)的水热合成和晶体结构（英）

A novel compound Ni(phen)(H₂O)(V₂O₆) has been hydrothermally synthesized and structurally determined to be a two-dimensional compound, which contains {V₂O₆}_n^2n- chains interconnected by nickel(Ⅱ) complexes via oxygen atoms. The crystallographic data measured by single-crystal X-ray diffraction analysis are as follows: C₁₂H₁₀N₂NiO₇V₂, M_r=454.81, monoclinic, space group P2₁/c, a=0.784 6(3), b=2.103 6(8), c=0.942 3(4) nm, β=112.872(5)°, V=1.433 0(10) nm³, Z=4, D_c=2.104 Mg·m^-3, μ(Mo Kα)=2.615 mm^-1, F(000)=904, T=298(2) K, 4 480 reflections collected, 2 470 independent (R_int=0.032 2), the final R=0.058 4 and wR₂=0.145 7 for 2 303 observed reflections with I>2σ(I). CCDC: 192520.     

Synthesis and Crystallographic Characterization of Complex [(CH_3)_3NCH_2CH_2N(CH_3)_3][HgI_4]·H_2O Containing Novel Cation

1 INTRODUCTION The crystal structures of several tetrahalogeno-mercurates (II) have been reported with a wide va-riety of stereochemical arrangements[1, . These stu- 2]dies have shown that the Hg atom…     

Hall effects and entropy generation applications for peristaltic flow of modified hybrid nanofluid with electroosmosis phenomenon

The electroosmotic peristaltic flow of modified hybrid nanofluid in presence of entropy generation has been presented in this thermal model. The Hall impact and thermal radiation with help of nonlinear relations has also been used to modify the analysis. The assumed flow is considered due to a non-uniform trapped channel. The properties of modified hybrid nanofluid model are focused with interaction of three distinct types of nanoparticles namely copper ($Cu)$, silver ($Ag$) and aluminum oxide ($A{l}_2{O}_3).$ The mathematical modeling and significances of entropy generation and Bejan number are identified. With certain flow assumptions, the governing equations are attained for optimized peristaltic electroosmotic problem. Widely used assumptions of long wave length and low Reynolds number reduced the governing equations in ordinary differential equations. The ND solver is flowed for the solution process. The physical significant of results is observed by assigning the numerical values to parameters.     

C60(Fullerene)及其卤化衍生物在阴离子聚合中的研究

综述了近年来C60及其卤化衍生物在阴离子聚合中的研究进展。在阴离子聚合中，C60可以直接与反应而进入主链，形成超枝化结构；C60可作为阴离子聚合的偶联剂，形成星形和线形结构；C60阴离子可以引发阴离子聚合。介绍了偶联产物结构控制的方法，以及偶联产物的稳定性。氯化富勒烯也可以作为阴离子聚合的偶联剂，生成星形结构聚合物。     

Coating of Tetraethylorthosilicate (TEOS)/Vinyltriethoxysilane (VTES) Hybrid Solution on Polymer Films

Tetraethylorthosilicate (TEOS)/vinyltriethoxysilane (VTES) hybrid materials were prepared and the hydrolysis and condensation reactions during processing were investigated by means of 29Si NMR solution spectroscopy. The variation of drying characteristics of the coating films was examined with respect to the tetraethylorthosilicate (TEOS)/vinyltriethoxysilane (VTES) ratio, as well as drying temperature, by FT-IR spectroscopy. It is shown that the TO mode of Si–O–Si stretching absorption was enhanced with increasing tetraethylorthosilicate (TEOS) content and drying temperature. Also, the wettability of the coating films on polymer films was independent of the solution composition but enhanced by the precoating of poly(4-hydroxystrene) (PHS) as a wetting agent. The adhesion between the coating and the films was also enhanced when the vinyltriethoxysilane (VTES) content in the coating solution was increased.     

Industrial Application of Hybrid Sol-Gel Coatings for the Decoration of Crystal Glassware

The coloration of glass via melting techniques presents some unique problems with respect to the reproducibility, toxicology and economics of certain colors, especially if the market demands are highly variable. This is also the case for consumer products such as crystal glass and tableware. Traditionally, the decoration of crystal glasses is performed by laborious manual techniques, which are costly and do not meet modern market requirements. Alternatively, spraying of colored lacquers is a highly flexible and valuable tool for the development of new products. Sol-gel type hybrid coatings provide several advantages compared to conventional organic systems like high abrasion resistance, almost perfect adhesion, refractive index matching and sufficient stability in dishwashing procedures. The solubility of organic dyes in the hybrid matrix is sufficient for intense colors even at rather low layer thicknesses, which on the other hand convey the high brilliance of the base material. The development of transparent, translucent and opaque hybrid coatings for crystal glass has been completed in the last few years and the production of partially coated articles has started recently. The synthesis and properties of the coating material are reviewed and the industrial process and first market results are also outlined.     

Robust interface on ENR-50/TiO2 nanohybrid material based sol-gel technique: Insights into synthesis,characterization and applications in optical

In this work, the sol–gel technique was used to prepare a new organic–inorganic hybrid from Epoxidized Natural Rubber (ENR-50) and Titanium dioxide (TiO₂) by blending different content of titania precursors (10, 30, and 50 wt%) with an ENR-50 matrix. A wide range of analyses was conducted to understand the nature of this hybrid and also to evaluate its potential uses in applications required high refractive index such as micro optical and optoelectronic devices. Results indicated that the ring-opening reaction of epoxide groups in ENR-50 increased with the increase of titania content in the hybrid resulting a strong bonding between titania and ENR-50 through TiOC bond, which was observed in FTIR spectrum at 1027–1028 cm⁻¹. It is also observed a slight decrease in the intensity of the amorphous peak along with a new crystalline peak appeared at 2θ = 23 and 27° due to the crystalline nature of titania. The hybrids showed three thermal degradation steps in the range of temperature 76 to 769 °C due to the existence of the Ti moieties with the mixture of polymer chains, which in turn shifted the T_g at 24.3, 26.9 and 28.1 °C for the hybrid at 10, 30, and 50 wt% TiO₂ compared to the T_g of ENR-50 at −18.4 °C respectively. The morphology of the ENR-50 showed clear changes during of the synthesis of ENR-50/TiO₂ hybrids, these changes were proven by SEM, TEM, and AFM analyses. Uv–Vis results showed that the higher wavelength peak at 293 nm has shifted to 296, 298 and 300 nm for the hybrid at 10, 30, and 50 wt% TiO₂ respectively due to the strong interaction between titania precursors and ENR-50 matrix. Furthermore, the hybrids showed good optical transparency in the visible light range.