High temperature corrosion behaviour of M(Co,Ni)CrAIY-coatings on high temperature materials-microanalytical investigations

In our former investigations, the phenomenon high temperature corrosion (HTC) was described exemplarily on selected materialcoating combinations for blades of stationary gas turbines, mainly in the temperature region of up to 750° C. To answer the question, in which manner higher gas inlet and/or higher material surface temperature would influence the HTC behaviour, a special analytical technique—the integral layer profile analysis—was introduced to ameliorate concentration profile methods. By examining IN 738 LC specimens with CoCrAlY plasma spray coating, stressed by hot gas at 900° C, the limits of this system are shown by explaining the corrosion mechanism; the method is also used for other systems, e.g. U 520 with NiCrAlY coating at 750° C.     

Anodic hydroxylation of 1-carbomethoxy-1,2,3,4-tetrahydrocarbazoles

1-Carbomethoxy-1,2,3,4-tetrahydrocarbazole (1) and its 7-methoxy derivative (2) were oxidized at carbon felt anodes in acetonitrile containing 0.2 M LiClO₄ and 2-17 M water at potentials on the rising portion of the primary oxidation peak to yield products formed by formal substitution of the C-1 H atom with hydroxide. The resulting 1-hydroxy-l-carbomethoxy-1,2,3,4-tetrahydrocarbazole and its 7-methoxy derivative were isolated in 44 and 22% yields, respectively, when sodium bicarbonate was used to control acidity of the medium. Structures were elucidated by NMR, IR, elemental analysis, and mass spectrometry. Voltammetry at carbon-paste and glassy carbon electrodes showed that the oxidations proceed by an ECE or DISPI pathway. The rate-determining step is the reaction of water with a cation radical electrochemically generated from 1 or 2, involving either proton abstraction or nucleophilic addition.     

Production of N,H, and NH active species in N2-H2 dc flowing discharges

Densities of N, H, and NH active species have been detected by laser-induced fluorescence (LIF) in N₂-xH₂ dc flowing discharges. A peak value of N atom densities far x = 0.2–0.5% and a plateau value of H atom densities between x = 1% and 90% in post-discharge conditions (0.05 sec, p = 2 torr) has been found. Comparison between LIF measurements of N atoms and the trend of the N₂(B, v = II) population shows that the emission from this state can be used for monitoring N atoms. The NH radical has only been detected inside the discharge region.On leave from Instituto Tecnológico de Aeronáutica, CNPq, Brazil.     

Degradation of aromatic compounds in ground-water, and methods of sample preservation

The degradation of acenaphthylene, acenaphthene, 2-methylnaphthalene, 2-methylindene, 3-methylindene and indene in water solutions was studied. These compounds at the 25-150 mug/l. level were almost totally degraded at ambient temperature within three days. The microbial population responsible for the degradation occurs naturally in ground-water taken from an aquifer in Ames, Iowa, which is contaminated with coal-tar products. These unidentified micro-organisms adapt readily to other waters when used as an inoculant for the degradation of aromatic compounds. The preservation of water to prevent such degradation was also investigated. Filtration through a 0.45-mum filter was found the most effective procedure for preserving the hydrocarbons in these waters.     

Configurational inversion and hexachloroethane chlorination of α-sulfonylcarbanions

The cis fused bicyclic sulfones 1a, 1c and 3a are lithiated in benzene with n-butyllithium under concomitant cis/trans isomerization of the ring fusion, involving intramolecular proton transfer. H/D exchange of the three α-hydrogens in protic solvents proceeds with retention of configuration. The lithiated sulfones are chlorinated with hexachloroethane (HCE) and show a strong preference for introduction of halogen at an equatorial α-position.     

Tris(acetonitrile)tricarbonylchromium(0) catalyzed 1,4-addition of hydrogen to 1,3-dienes

The Cr(CO)₃(CH₃CN)₃ complex is found to catalyze the 1,4-addition of hydrogen to 1,3-dienes such as 2-methyl-1,3-butadiene, trans-1,3-pentadiene, and trans, trans-2,4-hexadiene at low temperature (40°) and low H₂ pressure (20 psi). For trans, trans-2,4-hexadiene the only product obtained when D₂ is used is 2,5-dideuterio-cis-3-hexene. The catalytic 1,4-hydrogenation can be carried out in neat dienes, and turnover numbers for the catalyst of greater than 3000 have been observed.     

Kinetics of thermal decomposition of Co3O4 powder and single crystals

Kinetics of thermal decomposition in vacuum of Co₃O₄ powder as well as single crystals has been investigated. Discrepancies with the results of previous authors have been discussed. Decomposition of Co₃O₄ proceeds through formation of a compact layer of CoO and hence diffusion is the rate-limiting factor. The experimental curves α(t) be described for 0.05 < α < 0.85 using a modified Ginstling-Brounshtein equation: 1 ? 2α/3 ? (1 ? α)^2/3 = ktⁿ where the activation energy varies with the degree of decomposition.     

N-phenylselenophthalimide (NPSP) : A valuable selenenylating agent

The phenylseleno group (PhSe) has evolved in recent years as a very useful and versatile functionality. Its facile introduction into organic molecules and its subsequent oxidative or reductive removal, has allowed many important synthetic transformations.^1–7 Due to the fact that, similarly to halogens, it can exist either as an electrophilic species (PhSe⁺) or as a nucleophilic one (PhSe^-), this group can be introduced either via nucleophilic substrates (e.g. carbanions, olefins), or via electrophilic ones (e.g. epoxides, halides), as illustrated in Scheme 1. Another valuable aspect of the phenylseleno group is that it can be readily oxidized to the corresponding selenoxide(PhSe(O)—), which undergoes β-hydrogen abstraction and syn-elimination to form olefins, under relatively mild conditions (Scheme 2(a)). Furthermore, this group can be substituted with hydrogen, upon the action of an appropriate reducing agent (Scheme 2(b)).The great synthetic utility of the phenylseleno group is apparent from its extensive utilization in numerous natural products syntheses,¹ as well as many other synthetic studies.^2–7     

Advanced kinetic tools for the evaluation of decomposition reactions

Summary An advanced kinetic study on the thermal behaviour of pyrotechnic ignition mixtures has been carried out by differential scanning calorimetry using different B/KNO3 mixtures (50:50, 30:70, 20:80) as a model reaction. The experimental conditions applied (isochoric conditions/closed crucibles and isobaric conditions/open crucibles) as well as the composition of the mixtures noticeably influences the relative thermal stabilities of the energetic materials. The kinetic study focused on the prediction of the thermal stability of the different mixtures both in extended temperature ranges and under temperature conditions at which ordinary investigation would be very difficult. Using advanced numerical tools [1], thermal ageing and influence of the complex thermal environment on the heat accumulation conditions were computed. This can be done for any surrounding temperature profile such as isothermal, non-isothermal, stepwise, modulated, shock, adiabatic conditions and additionally for temperature profiles reflecting real atmospheric temperature changes (yearly temperature profiles of different climates with daily minimal and maximal fluctuations). Applications of accurate decomposition kinetics enabled the determination of the time to maximum rate under adiabatic conditions (TMR_ad) with a precision given by the confidence interval of the predictions. This analysis can then be applied for the examination of the effects of the surrounding temperature for safe storage or transportation conditions (e.g. determination of the safe transport or storage temperatures).     

Chlorination of α-sulfonyl carbanions with hexachloroethane: A novel preparation of α-halosulfones

The cyclic sulfones1,2, and3 are lithiated in benzene with n-butyllithium. Lithiation is demonstrated to lead to α-mono, α,α′-di and/or α,α-di and α,α,α′ trimetallation. The lithiated sulfones are chlorinated with hexachloroethane (HCE). Some mechanistic aspects of the reaction of the lithiosulfones with vicinal dihalides are discussed.