Influence of Equilibration Time in Solution on the Inclusion/Exclusion Topology Ratio of Host–Guest Complexes Probed by Ion Mobility and Collision‐Induced Dissociation

Host–guest complexes are formed by the creation of multiple noncovalent bonds between a large molecule (the host) and smaller molecule(s) or ion(s) (the guest(s)). Ion‐mobility separation coupled with mass spectrometry nowadays represents an ideal tool to assess whether the host–guest complexes, when transferred to the gas phase upon electrospray ionization, possess an exclusion or inclusion nature. Nevertheless, the influence of the solution conditions on the nature of the observed gas‐phase ions is often not considered. In the specific case of inclusion complexes, kinetic considerations must be taken into account beside thermodynamics; the guest ingression within the host cavity can be characterized by slow kinetics, which makes the complexation reaction kinetically driven on the timescale of the experiment. This is particularly the case for the cucurbituril family of macrocyclic host molecules. Herein, we selected para‐phenylenediamine and cucurbit[6]uril as a model system to demonstrate, by means of ion mobility and collision‐induced dissociation measurements, that the inclusion/exclusion topology ratio varies as a function of the equilibration time in solution prior to the electrospray process.     

Synthesis of novel side‐chain triphenylamine polymers with azobenzene moieties via RAFT polymerization and investigation on their photoelectric properties

Two novel and well‐defined polymers, poly[6‐(5‐(diphenylamino)‐2‐((4‐methoxyphenyl)diazenyl)phenoxy)hexyl methacrylate] (PDMMA) and poly[6‐(4‐((3‐ethynylphenyl)diazenyl) phenoxy)hexyl methacrylate] (PDPMMA), which bear triphenylamine (TPA) incorporated to azobenzene either directly (PDMMA) or with an interval (PDPMMA) as pendant groups were successfully prepared via reversible addition‐fragmentation chain transfer polymerization technique. The electrochemical behaviors of PDPMMA and PDMMA were investigated by cyclic voltammograms (CV) measurement. The hole mobilities of the polymer films were determined by fitting the J‐V (current‐voltage) curve into the space‐charge‐limited current method. The influence of photoisomerization of the azobenzene moiety on the behaviors of fluorescence emission, CV and hole mobilities of these two polymers were studied. The fluorescent emission intensities of these two polymers in CH₂Cl₂ were increased by about 100 times after UV irradiation. The oxidation peak currents (I_OX) of the PDMMA and PDPMMA in CH₂Cl₂ were increased after UV irradiation. The photoisomerization of the azobenzene moiety in PDMMA had significant effect on the electrochemical behavior, compared with that in PDPMMA. The changes of the hole mobility before and after UV irradiation were very small for both polymers. The HOMO energies (E_HOMO, HOMO: the highest occupied molecular orbital) of side chain moieties of TPA incorporated with cis‐isomer and trans‐isomer of azobenzene in PDMMA and PDPMMA were obtained by theoretical calculation, which are basically consistent with the experimental results. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Influence of the mode of deformation on recrystallisation kinetics in Nickel through experiments,theory and phase field model

Abstract

In this paper, we report the influence of the mode of deformation on recrystallisation kinetics through experiments, theory and a phase field model. Ni samples of 99.6% purity are subjected to torsion and rolling at two equivalent plastic strains and the recrystallisation kinetics and microstructure are compared experimentally. Due to significant differences in the distributions of the nuclei and stored energy for the same equivalent strain, large differences are observed in the recrystallisation kinetics of rolled and torsion-tested samples. Next, a multi-phase field model is developed in order to understand and predict the kinetics and microstructural evolution. The coarse-grained free energy parameters of the phase field model are taken to be a function of the stored energy. In order to account for the observed differences in recrystallisation kinetics, the phase field mobility parameter is a required constitutive input. The mobility is calculated by developing a mean field model of the recrystallisation process assuming that the strain free nuclei grow in a uniform stored energy field. The activation energy calculated from the mobilities obtained from the mean field calculation compares very well with the activation energy obtained from the kinetics of recrystallisation. The recrystallisation kinetics and microstructure as characterised by grain size distribution obtained from the phase field simulations match the experimental results to good accord. The novel combination of experiments, phase field simulations and mean field model facilitates a quantitative prediction of the microstructural evolution and kinetics.     

An Adjustable Cleft Based on an 8-Sulfonamide-2-Naphthoic Acid with Oxyanion Hole Geometry

Cleft type receptors showing the oxyanion hole motif have been prepared in a straightforward synthesis starting from the commercial 3,7-dihidroxy-2-naphthoic acid. The double H-bond donor pattern is achieved by the introduction of a sulfonamide group in the C-8 position of naphthalene and a carboxamide at the C-2 position. This cleft, for which the geometry resembles that of an oxyanion hole, is able to adjust to different guests, as shown by the analysis of the X-ray crystal structures of associates with methanol or acetic acid. Combination of hydrogen bonds and charge-transfer interactions led to further stabilization of the complexes, in which the electron-rich aromatic ring of the receptor was close in space to the electron-deficient dinitroaromatic guests. Modelling studies and bidimensional NMR experiments have been carried out to provide additional information.     

On The Mechanism of “Hole Burning” In Vibronic Spectra of Complex Organic Compounds

The “hole burning” in continuous vibronic absorption spectra on photobleaching of dye solutions was usually investigated by two methods.     

Toward deformation densities for intramolecular interactions without radical reference states using the fragment,atom, localized,delocalized, and interatomic (FALDI) charge density decomposition scheme

A novel approach for calculating deformation densities is presented, which enables to calculate the deformation density resulting from a change between two chemical states, typically conformers, without the need for radical fragments. The Fragment, Atom, Localized, Delocalized, and Interatomic (FALDI) charge density decomposition scheme is introduced, which is applicable to static electron densities (FALDI‐ED), conformational deformation densities (FALDI‐DD) as well as orthodox fragment‐based deformation densities. The formation of an intramolecular NH⋅⋅⋅N interaction in protonated ethylene diamine is used as a case study where the FALDI‐based conformational deformation densities (with atomic or fragment resolution) are compared with an orthodox EDA‐based approach. Atomic and fragment deformation densities revealed in real‐space details that (i) pointed at the origin of density changes associated with the intramolecular H‐bond formation and (ii) fully support the IUPAC H‐bond representation. The FALDI scheme is equally applicable to intra‐ and intermolecular interactions. © 2017 Wiley Periodicals, Inc.     

In beam Mößbauer spectroscopy: 57Fe in semiconductors

Abstract

An overview of results on microscopic properties, implantation features and dynamics of Fe ions implanted into Si, Ge and ZnS as investigated with in beam Mößbauer spectroscopy(IBMS) is given. Potential and limitations of the method are discussed.     

One Way Traffic: Base-to-Backbone Hole Transfer in Nucleoside Phosphorodithioate

The directionality of the hole-transfer processes between DNA backbone and base was investigated by using phosphorodithioate [P(S⁻)=S] components. ESR spectroscopy in homogeneous frozen aqueous solutions and pulse radiolysis in aqueous solution at ambient temperature confirmed initial formation of G^.+-P(S⁻)=S. The ionization potential of G-P(S⁻)=S was calculated to be slightly lower than that of guanine in 5′-dGMP. Subsequent thermally activated hole transfer from G^.+ to P(S⁻)=S led to dithiyl radical (P-2S^.) formation on the μs timescale. In parallel, ESR spectroscopy, pulse radiolysis, and density functional theory (DFT) calculations confirmed P-2S^. formation in an abasic phosphorodithioate model compound. ESR investigations at low temperatures and higher G-P(S⁻)=S concentrations showed a bimolecular conversion of P-2S^. to the σ²-σ*¹-bonded dimer anion radical [-P-2S 2S-P-]⁻ [ΔG (150 K, DFT)=−7.2 kcal mol⁻¹]. However, [-P-2S 2S-P-]⁻ formation was not observed by pulse radiolysis [ΔG° (298 K, DFT)=−1.4 kcal mol⁻¹]. Neither P-2S^. nor [-P-2S 2S-P-]⁻ oxidized guanine base; only base-to-backbone hole transfer occurs in phosphorodithioate.     

Hole/Electron Transporting Materials for Nonfullerene Organic Solar Cells

Nonfullerene acceptor based organic solar cells (NF-OSCs) have witnessed rapid progress over the past few years owing to the intensive research efforts on novel electron donor and nonfullerene acceptor (NFA) materials, interfacial engineering, and device processing techniques. Interfacial layers including electron transporting layers (ETL) and hole transporting layers (HTLs) are crucially important in the OSCs for facilitating electron and hole extraction from the photoactive blend to the respective electrodes. In this review, the lates progress in both ETLs and HTLs for the currently prevailing NF-OSCs are discussed, in which the ETLs are summarized from the categories of metal oxides, metal chelates, non-conjugated electrolytes and conjugated electrolytes, and the HTLs are summarized from the categories of inorganic and organic materials. In addition, some bifunctional interlayer materials served as both ETLs and HTLs are also introduced. Finally, the prospects of ETL/HTL materials for NF-OSCs are provided.