大跨越管道油气混输压力波速及响应特性研究

基于双流体模型,利用小扰动理论,提出了油气混输大跨越管道压力波速模型.利用计算机编程对其求解,通过大跨越管道油气混输实例,得到了以下结论:压力波速的变化受气相影响较大,即使少量气体也能在较大程度上影响压力波速,随混输气量增大,压力波速减小,压力响应时间延长;混输低点气体所承受的压力较混输高点大,从而低点处气相压缩系数小,混输低点较混输高点压力波速增大,压力响应时间相应缩短;在输运管道低点处,气体受到极大压缩,压力波速的变化不明显,几乎收敛于恒定值,在混输管道高点处压力波速变化剧烈.     

基于两平行线及其线上三点的摄像机标定方法

在大视场交通监控摄像机的标定中,由于不便于放置大尺寸标定靶标,常采用交通标线构成的特定几何图形替代标定靶标,但许多交通场景仅有一组平行的车道分界交通标线,难以获得传统标定方法所需的标定约束条件。针对此类交通场景,选取两平行交通标线和其中一条线上的三点作为标定参考物,依靠其中一条线上三点在单幅图像中的像素坐标、三点间的两个距离值及平行线间距作为约束条件来完成摄像机的标定。建立了图像坐标系与世界坐标系之间新的换算关系,推导出了摄像机内外参数的求解公式,探讨了旋转角对测量误差的影响。实验结果表明,在约束条件不足的情况下能够获得较好的摄像机参数近似解,沿道路方向上的测距精度优于对比文献的结果,具有标定参考物选取容易、操作简便、几何约束条件少等优点,适用于交通监控系统中大视场摄像机的快速标定场合。     

中短途汽车客运问题博弈分析

汽车客运尤其是中短途汽车客运在人们的现代生活中发挥重要的作用,它在拥有众多长处的同时也存在着许多问题和不足.从经济博弈论的角度,对客运车主和交通管理部门的行为进行分析,从而说明违规运营现象存在的原因并提出相应的解决措施.     

Integrating modeling,algorithm design,and computational implementation to solve a large-scale nonlinear mixed integer programming problem

This paper describes the formulation of a nonlinear mixed integer programming model for a large-scale product development and distribution problem and the design and computational implementation of a special purpose algorithm to solve the model. The results described demonstrate that integrating the art of modeling with the sciences of solution methodology and computer implementation provides a powerful approach for attacking difficult problems. The efforts described here were successful because they capitalized on the wealth of existing modeling technology and algorithm technology, the availability of efficient and reliable optimization, matrix generation and graphics software, and the speed of large-scale computer hardware. The model permitted the combined use of decomposition, general linear programming and network optimization within a branch and bound algorithm to overcome mathematical complexity. The computer system reliably found solutions with considerably better objective function values 30 to 50 times faster than had been achieved using general purpose optimization software alone. Throughout twenty months of daily use, the system was credited with providing insights and suggesting strategies that led to very large dollar savings. This research was supported in part by the Office of Naval Research Contract N00014-78-C-0222, by the Center for Business Decision Analysis*, by the University of Texas at Austin, and by the David Bruton, Jr., Centennial Chair in Business Decision Support Systems. Reproduction in whole or in part is permitted for any purpose of the U.S. Government. Center for Business Decision Analysis, Graduate School of Business — GSB 3.126, University of Texas, Austin, Texas 78712, USA.     

压力膨化处理对正极性聚丙烯蜂窝膜的驻极体性质的影响

压力膨化处理工艺能够显著改善聚丙烯蜂窝薄膜（cellular polypropylene） 驻极体的压 电活性.通过热脉冲技术、表面电位衰减测量及TSD 电流谱分析等研究了经恒压正电晕充电 的聚丙烯蜂窝膜的陷阱能级分布特征，讨论了压力膨化处理工艺对这类蜂窝膜驻极体电荷稳 定性及电荷输运特性的影响.结果说明，PP 蜂窝膜内存在着位于中能级区的能值各异的三种 分立陷阱，深能值陷阱和浅能值陷阱的大多数位于孔洞膜近表面的体层或体内，而中等能值 陷阱则主要位于自由面附近.压力膨化处理改变了PP 蜂窝膜的能阱状态并在一定程度上降低 了这类孔洞膜驻极体的电荷储存稳定性，但没有明显影响其由慢再俘获效应占主导地位的脱 阱电荷输运特性. 关键词： 压力膨化处理 聚丙烯蜂窝膜 驻极体 电荷储存与陷阱分布 电荷输运     

Pareto optimal solutions of a cost–time trade-off bulk transportation problem

A cost–time trade-off bulk transportation problem with the objectives to minimize the total cost and duration of bulk transportation without according priorities to them is considered. The entire requirement of each destination is to be met from one source only; however a source can supply to any number of destinations subject to the availability of the commodity at it. Two new algorithms are provided to obtain the set of Pareto optimal solutions of this problem. This work extends and generalizes the work related to single-objective and prioritized two-objective bulk transportation problems done in the past while providing flexibility in decision making.     

大管径油气两相流流型变化机理的研究

本文对大直径水平和不同倾角的倾斜管道内油气混输流动的流型及流行转换进行了研究,探讨大直径油气混输管道不同倾斜度油气两相流动过程中段塞流的形成机理。在大型多相流流动模拟实验装置上,模拟油气在大直径管道内的混输流动。通过改变倾斜角度,研究倾角分别为1°、5°以及10°下的油气两相流流型及流型转换的特性,实验结果表明,倾斜角度对段塞流流型的产生及其变化影响显著。     

不同燃烧状态飞火颗粒自由燃烧规律研究

飞火是开放空间中大尺度火灾非连续性蔓延的主要形式。本文通过不同热流下的木质飞火颗粒自由燃烧实验,揭示不同燃烧状态飞火颗粒的结构变形、质量损失及温度分布的变化规律。研究表明,颗粒结构变形受材料化学反应机制和热机械力作用共同影响;颗粒燃烧反应易造成热解气体的内部积聚,以致内压激增、诱发喷射或喷溅细小颗粒的现象;阴燃过程颗粒表面温度变化较小但持续时间很长,明火状态的颗粒持续高温并且温度与质量变化剧烈。     

Absorption,transportation and distribution of imidacloprid in maize

The neonicotinoid imidacloprid is a very important insecticide in maize cultivation in China. A laboratory experiment was conducted to investigate its absorption, transportation and distribution in maize plants. Plants were exposed to an aqueous solution of imidacloprid at five concentrations (10, 20, 50, 100 and 200 μg/mL). The residues of imidacloprid in different plant parts were determined by using a quick and effective method of high-performance liquid chromatography. Results showed that the average recoveries ranged from 85.16% to 102.23%, with relative standard deviations of 1.82–4.40% at three different spiking levels in each different matrix. The half-lives of imidacloprid in hydroponic maize water were from 5.33 to 11.55 days. The concentrations in roots, stems and leaves were from 5.61 to 7.48, 1.03 to 4.03 and 0 to 30.57 μg/mL after 6 h–7 days exposed in 10 μg/mL imidacloprid aqueous solutions, respectively. Our study showed that imidacloprid was strongly absorbed by roots and mainly accumulated in leaves. Quantity ratio and bioconcentration factors (BCFs) were also used to estimate the distribution and accumulation in maize. The values of quantity ratios were the highest in the leaves while lowest in the root after 7 days treatments, with the ranking of leaves > stem > root. The BCFs were 0.63–1.66, 0.52–0.92 and 3.20–6.78 in root, stem and leaves, respectively. These results demonstrated that the exposed time and imidacloprid application concentrations were also the main factors influencing the absorption. This study enhances our understandings of the uptake and distribution of imidacloprid in maize plants.