The high-temperature durability of Rh-free threeway catalysts used for automoble emission control

The high-temperature durability of cordierite honeycomb Rh-free three-way catalysts (TWC) containing additives has been studied by calcining catalysts at various temperatures in the interval of 600≈1100°C. The three-way performances of these catalysts were evaluated for the reaction of carbon monoxide(CO), hydrocarbon(HC) and nitrogen oxides(NOx) at given conditions by using a fixed bed reactor. The results show that after Rh-free TWC are thermally aged in air at 1100°C for 5h and 950°C for 104 h, the TWC still have better three-way activity compared with Rh-containing TWC.     

Copper(II)–Ammonia Complexation Equilibria in Aqueous Solutions at Temperatures from 30 to 250°C by Visible Spectroscopy

The spectra of copper(II)–ammonia solutions in 2 mol-kg^–1 NH₄NO₃(aq) were recorded as a function of pH with a new UV–visible flow cell, capable of operating at conditions up to 325°C and 300 bars. Equilibrium constants for the formation of copper(II)–ammonia complexes Cu(NH₃)_n ²⁺, 1 n 4, from 30 to 150°C were determined by evolving factor analysis and nonlinear least-squares regression. Measurements at higher temperatures were limited by thermal decomposition of NH₄NO₃(aq). The formation constants of Cu(NH₃)_n ²⁺ decrease with temperature, consistent with extrapolations of literature data from measurements below 100°C. Measurements above 150°C were carried out in 0.5 mol-kg^–1 CF₃SO₃H (aq), at the very high ammonia concentrations required to avoid the precipitation of CuO(s). The spectra are consistent with Cu(NH₃)₄ ²⁺ as the predominant species, based on extrapolations of peak maxima and molar absorptivities from lower temperatures. Shifts in the spectra of Cu²⁺ and the Cu(NH₃)_n ²⁺ species to higher wavelength and increases in molar absorbance with increasing temperature are discussed in terms of the structure of the complexes.     

稀土变质热锻模具铸钢高温磨损性能的研究

研究了稀土（RE）变质热锻模具铸钢的高温磨损性能，并与热锻模具钢H13钢和3Cr2W8V钢进行对比，探讨了稀土元素的作用和热锻模具铸钢的高温磨损机理。结果表明：随着RE加入量的增加，热锻模具铸钢的磨损率先减后增，RE加入量在质量分数为0．05％时热锻模具铸钢具有最佳的高温磨损性能。RE变质热锻模其铸钢的高温耐磨性明最高于H13钢和3Cr2W8V钢。高温磨损机理为氧化磨损和氧化物的疲劳剥落，磨屑为块状的Fe2O3和Fe3O4。     

高温超导体的Cu-O键型和氧上的部分电荷

多数钙钛矿型化合物是离子型绝缘体，而高温超导化合物则有金属电性，它们是以什么键型为主？对此等人[1]认为用共价或金属成键图像描述高温超导体在化学上更合理，Nepela等人[2]指出超导体临界温度（Tc）随阴离子平均电负性与阳离子平均电负性之差增大而升高．这意味着离子性较强的超导体有较高的人．杨频等问运用晶型键参数方法估算结果表明高温超导体属干部分离子性与部分共价性键．以上不同的结果都是基丁理论处理或估算得到的·本文试图在实验上通过比较不同成键特征的铜化合物的x光电子能潜（＊P8）来估计对高温超导性起重要作用的C…     

Effects of Total Thermal Balance on the Thermal Energy Absorbed or Released by a High-Temperature Phase Change Material

Front tracking and enthalpy methods used to study phase change processes are based on a local thermal energy balance at the liquid–solid interface where mass accommodation methods are also used to account for the density change during the phase transition. Recently, it has been shown that a local thermal balance at the interface does not reproduce the thermodynamic equilibrium in adiabatic systems. Total thermal balance through the entire liquid–solid system can predict the correct thermodynamic equilibrium values of melted (solidified) mass, system size, and interface position. In this work, total thermal balance is applied to systems with isothermal–adiabatic boundary conditions to estimate the sensible and latent heat stored (released) by KNO3 and KNO3/NaNO3 salts which are used as high-temperature phase change materials. Relative percent differences between the solutions obtained with a local thermal balance at the interface and a total thermal balance for the thermal energy absorbed or released by high-temperature phase change materials are obtained. According to the total thermal balance proposed, a correction to the liquid–solid interface dynamics is introduced, which accounts for an extra amount of energy absorbed or released during the phase transition. It is shown that melting or solidification rates are modified by using a total thermal balance through the entire system. Finally, the numerical and semi-analytical methods illustrate that volume changes and the fraction of melted (solidified) solid (liquid) estimated through a local thermal balance at the interface are not invariant in adiabatic systems. The invariance of numerical and semi-analytical solutions in adiabatic systems is significantly improved through the proposed model.     

The pseudogap in LSCO-type high-temperature superconductors as seen by neutron crystal-field spectroscopy

We studied the isotope, pressure and doping effects on the pseudogap temperature T^* by neutron spectroscopic experiments of the relaxation rate of crystal-field excitations in La_1.96−xSr_xHo_0.04CuO₄ (x = 0.11, 0.15, 0.20, 0.25) on the high-resolution time-of-flight spectrometer FOCUS at SINQ, PSI. We found clear evidence for the opening of a pseudogap in the underdoped regime at T^*(x = 0.11) = (82.2 ± 1.2) K as well as in the overdoped and the heavily overdoped compounds at T^*(x = 0.2) = (49.2 ± 0.7) K and at T^*(x = 0.25) = (46.5 ± 0.5) K, respectively. Furthermore, we investigated the effect of oxygen isotope substitution on the pseudogap, the experiments revealed ΔT^*(x = 0.11) = (21.3 ± 5.2) K and ΔT^*(x = 0.2) = (4.5 ± 1.3) K. The application of hydrostatic pressure (0.8 and 1.2 GPa) on the optimally doped compound (x = 0.15) results in a downward shift of dT^*/dp = (−5.9 ± 1.6) K/GPa.     

X-ray emission spectroscopy with EPMA applied to high Tc Superconductors using new spectrometer crystals

The High Temperature Superconductors are characterized by a very anisotropical structure and by typical arrangements of Cu- and O-atoms within CuO₂-planes. In studying the electronic structure of these compounds there is a strong demand for high resolution valence band spectroscopy. Using an electron probe microanalyzer we study the X-ray emission of O-K_ga and Cu-L emerging from polycrystalline YBa₂Cu₃O₇ and Tl₂Ba₂Ca₂Cu₃O₁₀. The O-K emission band is analyzed using a chlinochlore crystal in (001) orientation (2d = 28.4 Å). For the Cu-L emission band we use a beryl crystal in (10¯10) orientation (2d = 15.9 Å). Furthermore, orientation dependent X-ray emission spectroscopy of single-crystalline YBa₂Cu₃O₇ and Tl₂Ba₂Ca₁Cu₂O₈ specimens was performed. We present the partial O-K spectra which represent the O-2p ( = x, y, z) electronic densities of states of the valence band and compare them with calculated data.     

The studies of the effect of photostimulated changes in thin carbon films

Photostimulated changes in thin carbon films deposited onto fused silica substrates by reactive magnetron sputtering and irradiated by the light of the first (1060nm) and the second (530nm) harmonics of a QW-switched Nd³⁺ AVG laser were investigated. The changes are supposed to be connected with the reordering of chemical bounds.     

Investigation of superconductivity effects in single-phase and multiphase Bi2Sr2CaCu2O8 single-crystals at 2-MM wavelengths

Experimental investigations of superconductivity effects in single-phase and multiphase Bi₂Sr₂CaCu₂O₈ single-crystals have been carried out at 142 GHz frequency by means of the standing wave profile method [1]. Josephson harmonic generation has been observed to be responsible for the appearence of additional peaks on the standing wave profile of the open dielectric resonator loaded with a properly orientated multiphase high-T_c superconductor specimen. This leads to the conclusion that most of the Josephson junctions in multiphase crystals are located in certain crystallographic planes. The investigations of temperature dependencies showed that sharp resonant peaks of conductivity observed earlier [2] at 60 GHz could also be observed at 142 GHz.