Characterization of OV-1/FFAP-mixture coated glass capillary columns used for the separation of free fatty acids

As an alternative to acid pretreated UCON and FFAP capillaries for the analysis of wide-boiling free fatty acid mixtures, OV-1 : FFAP phase mixtures were used on high-temperature silylated inert glass capillary columns. The HETP-carrier gas velocity curves, peak asymmetry factors, coating efficiency, gas phase and stationary phase contributions to the mass transfer resistance were determined for various OV-1 : FFAP ratios. Mixed-phase capillaries showed optimum performance at a 2 : 1 OV-1 : FFAP ratio. The thermal and long-term stability of OV-1-stabilized FFAP columns surpassed those of the UCON and pure FFAP reference column used.     

Ba-K-Bi-O和Ba-K-Pb-O氧化物的碘量滴定

本文提出了碘量法滴定Ba－K－Bi-O和Ba－K－Pb－O氧化物中Ba和Pb的名义价态，然后据此计算这些氧化物中K和Ba含量的方法。该法适用于正常条件下合成的具有ABO3型钙钛矿结构的Ba－K－Bi-O和Ba－K－Pb－O晶体。用本法的滴定结果表明，Tc为31K的Ba－K－Bi-O超导体的K含量为0．4，当K含量减少时，Tc随之下降。     

Correction procedure for the electron microprobe analysis of porous materials

A correction method is proposed for the quantitative determination of stoichiometric ratios in porous materials by electron microprobe analysis. Analysis of this kind of material is complicated by an imperfect surface that can only be improved to some extent. The correction is based on a linear dependence (different for each element) of the analyses on a sum of weight concentrations of oxides. With this correction it is possible to use analyses affected by the imperfection of the surface with much better confidence compared to common normalisation. An example is presented for a series of ceramic superconductors Bi_2.1(SrCa)_2.9Cu₂O₈₊.     

Synthesis and properties of segmented aromatic poly(ether sulfone)-amide and poly(ether sulfone)-imide copolymers

New segmented aromatic poly(ether sulfone)-amide and poly(ether sulfone)-imide copolymers were synthesized by the chain extension of α,w-diamine-terminated poly(ether sulfone) oligomer with both aromatic dicarboxylic acid chlorides and tetracarboxylic dianhydrides, respectively. Crystallization of the poly(ether sulfone)unit was suppressed by the introduction of amide or imide linkage along the polymer backbone, giving amorphous copolymers that were +eadily soluble in various organic solvents. The copolymers had somewhat higher glass transition temperatures than the parent poly(ether sulfone). They afforded transparent and tough films by solution casting. © 1992 John Wiley & Sons, Inc.     

The decomposition of edta-gel precursors in the production of BSCCO superconductors

The decomposition of EDTA gel precursors for BSCCO superconductor manufacture has been studied using STA (TG/DTA) and dilatometry in conjunction with FTIR. The thermoanalytical data are discussed in relation to the sequence of phase formation necessary for the production of the 2223 BSCCO superconducting phase. The effects of substitution of Pb for Bi on the temperatures of formation of the superconducting phases is also discussed. STA has also been carried out under varying oxygen partial pressures to determine the effects of oxygen pressure on the formation and decomposition of the phases involved in the production of the 2223 compound.     

110K铋基超导相形成的组成条件

Bi-Sr-Ca-Cu-O超导材料中存在110K和80K2个超导相。其组成是Bi_2Sr_2Ca_2Cu_3O_y和Bi_2Sr_2CaCu_2O。但迄今为止,在按2223组成比合成的未掺杂Bi系超导材料中从未得到过纯的110K相,也未见过组成为2223,零电阻温度在100K以上材料的报道。为了探索形成110K相的最佳条件,本文以2223组成比为参考,合成了5个系列材料:Bi_xSr_2Ca_2Cu_3O_y,Bi_2Sr_xCa_2Cu_3O_y,Bi_2Sr_2Ca_xCu_3O_y,Bi_2Sr_2Ca_2Cu_xO_y,Bi_i Sr_uCa_yCu_wO_s。     

BiPbSbSrCaCuO的超导电性

据报,在BiPbSrCaCuO中加Sb形成BiPbSbSrCaCuO体系的T_c可达130K。但其组成、结构、性质等均未见详细报道。我们合成了一系列BiPbSbSrCaCuO,发现了一个具有2212相结构、但T_c却为～110K的超导相。 试样制备包括将Bi_2O_3,PbO,Sb_2O_3,SrCO_3,CaO和CuO(AR级)混匀、碾磨、于     

A complementary and synergistic effect of Fe-Zn binary metal oxide in the process of high-temperature fuel gas desulfurization

57Fe Mossbauer spectroscopy was used to investigate the evolution of Fe-Zn binary metal oxide sorbent in the process of high-temperature fuel gas desulfurization. The results of phase analyses show that Fe-Zn binary metal oxide sorbent is rapidly reduced in hot fuel gas and decomposed to new phases of highly dispersed microcrystalline elemental iron and zinc oxide, both of which become the active desulfurization constituents. A complementary and synergistic effect between active iron acting as a high sulfur capacity constituent and active zinc oxide acting as a deep refining desulfurization constituent exists in this type of sorbent for hot fuel gas desulfurization.     

Systematic high-pressure synthesis of new filled skutterudites with heavy lanthanide, LnFe4P12 (Ln=heavy lanthanide, including Y)

New filled skutterudites with heavy lanthanide, LnFe₄P₁₂ (Ln=Tb, Dy, Ho, Er, Tm, Yb, Lu and Y) have systematically been prepared for the first time by the high-pressure technique. The relationship between lattice constants and atomic numbers of lanthanide (including Y) is established for LnFe₄P₁₂. Electrical and magnetic properties of several new filled skutterudites with heavy lanthanide have been studied at low temperatures; YFe₄P₁₂ shows a superconducting transition at around 7 K, and DyFe₄P₁₂ behaves as a ferromagnet below 10 K. Electrical and magnetic anomalies in DyFe₄P₁₂ and YFe₄P₁₂ are mainly discussed.     

Determination of total heterogeneity and fractal dimensions of high-temperature superconductors

Using thermo-analytical and sorptometric methods physicochemical properties and especially surface heterogeneity of HgBa₂Ca₂Cu₃O₈₊, (Hg-1223) was investigated. The desorption energy distribution was derived from mass loss Q-TG and differential mass loss Q-DTG curves of thermodesorption in quasi-isothermal conditions of pre-adsorbed n-octane and water vapour. It is shown that the superconducting Hg-1223 phase is highly sensitive to water vapours. The mechanism of water adsorption depends largely on the activation time. By water vapour saturation in a period of 90 min, physisorption takes place. Prolonged periods result in a chemical decomposition. From nitrogen ad- and desorption isotherms the fractal dimension of superconductors were calculated. A new approach is proposed to calculate fractal dimension from Q-TG curves.This revised version was published online in November 2005 with corrections to the Cover Date.