Z箍缩驱动混合堆包层瞬态传热特性

Z箍缩驱动聚变-裂变混合能源堆（Z-FFR）以较长周期（10 s）脉冲式运行,为实现3000 MW的热功率输出,单个脉冲需要产生的能量较大,包层和第一壁在强热冲击下的瞬态传热和温度特性是决定Z-FFR技术可行性的关键问题之一。通过理论计算,分析了在连续脉冲作用下包层和第一壁温度随时间的变化规律。同时以输出恒定的电功率为目标,提出了展平系统输出功率的简便方法,并分析了出口冷却剂温度的波动特性。结果表明材料最高温度均在安全限值内,第一壁表面瞬时高温层厚度约为0.5 mm,系统输出功率波动幅度在-2.84%~+2.05%范围内。     

A Fault Detection Method for Electrohydraulic Switch Machine Based on Oil-Pressure-Signal-Sectionalized Feature Extraction

A turnout switch machine is key equipment in a railway, and its fault condition has an enormous impact on the safety of train operation. Electrohydraulic switch machines are increasingly used in high-speed railways, and how to extract effective fault features from their working condition monitoring signal is a difficult problem. This paper focuses on the sectionalized feature extraction method of the oil pressure signal of the electrohydraulic switch machine and realizes the fault detection of the switch machine based on this method. First, the oil pressure signal is divided into three stages according to the working principle and action process of the switch machine, and multiple features of each stage are extracted. Then the max-relevance and min-redundancy (mRMR) algorithm is applied to select the effective features. Finally, the mini batch k-means method is used to achieve unsupervised fault diagnosis. Through experimental verification, this method can not only derive the best sectionalization mode and feature types of the oil pressure signal, but also achieve the fault diagnosis and the prediction of the status of the electrohydraulic switch machine.     

一种改进的2×2 SOI Mach-Zehnder热光开关

本文设计并制作了基于强限制多模干涉耦合器的2×2 SOI马赫-曾德热光开关.这种光开关采用了深刻蚀结构的多模干涉耦合器和输入/输出波导,较大地提高了干涉耦合器的性能并减少了连接耦合损耗.同时,在调制臂区域采用浅刻蚀结构,保持其单模调制状态.深刻蚀多模干涉耦合器具有优越的特性,在实验中测得不均衡度只有0.03 dB,插入损耗－0.6 dB.基于这种耦合器的新型热光开关,其插入损耗为－6.8 dB,其中包括光纤-波导耦合损耗－4.3 dB,开关时间为6.8 μs.     

Luminescence Switching of Organogold(I) Complexes between Aggregation-induced Phosphorescence Enhancement and Aggregation-caused Quenching by Balancing Auxiliary Ligands around the AuI Center

Attaching AIE-active L1 ([1,1′:2′,1′′:4′′,1′′′-quaterphenyl]-2-yldiphenylphosphane) to AuCl, shortened the distances of P−C bonds to promote electron cloud overlap between Au^I and L1 , affords 1 ( L1 AuCl) with aggregation-induced phosphorescence enhancement (AIPE) activity by ³LMCT transitions. Then substituting the coplanar L2 (9-ethynylanthracene) for the Cl⁻ in 1 providing 2 , switches the luminescence to aggregation-caused quenching (ACQ) activity. Furthermore, we restore the performance from ACQ to AIPE by metathesis reactions to transfer 2 into 1 . It is versatile synthetic strategy of reversible transformation between 1 and 2 that switches the luminescence of organogold(I) between AIPE and ACQ through balancing auxiliary ligands around the given metal.     

Sustainable and Robust Graphene Cellulose Paper Decorated with Lithiophilic Au Nanoparticles to Enable Dendrite-free and High-Power Lithium Metal Anode

Lithium metal anodes (LMAs) with high energy density have recently captured increasing attention for development of next-generation batteries. However, practical viability of LMAs is hindered by the uncontrolled Li dendrite growth and infinite dimension change. Even though constructing 3D conductive skeleton has been regarded as a reliable strategy to prepare stable and low volume stress LMAs, engineering the renewable and lithiophilic conductive scaffold is still a challenge. Herein, a robust conductive scaffold derived from renewable cellulose paper, which is coated with reduced graphene oxide and decorated with lithiophilic Au nanoparticles, is engineered for LMAs. The graphene cellulose fibres with high surface area can reduce the local current density, while the well-dispersed Au nanoparticles can serve as lithiophilic nanoseeds to lower the nucleation overpotential of Li plating. The coupled relationship can guarantee uniform Li nucleation and unique spherical Li growth into 3D carbon matrix. Moreover, the natural cellulose paper possesses outstanding mechanical strength to tolerate the volume stress. In virtue of the modulated deposition behaviour and near-zero volume change, the hybrid LMAs can achieve reversible Li plating/stripping even at an ultrahigh current density of 10 mA cm⁻² as evidenced by high Coulombic efficiency (97.2 % after 60 cycles) and ultralong lifespan (1000 cycles) together with ultralow overpotential (25 mV). Therefore, this strategy sheds light on a scalable approach to multiscale design versatile Li host, promising highly stable Li metal batteries to be feasible and practical.     

脉冲高功率离子二极管的动力学模拟

基于等离子体的爆炸发射模型,利用自洽的2.5维的胞中粒子（PIC）模拟程序MAGIC模拟了平板型磁绝缘离子二极管中电子和质子的动力学特性。给出了电压为300kV,外加磁场为2倍临界磁场情况下的二极管特性,阴阳极间隙中带电粒子的空间和相空间分布,以及净电荷密度分布和电场分布,结果表明,引出束流密度比单离子Child-Langmuir公式计算的结果大5倍;外加磁场导致在阴极附近形成虚阴极。空间电荷使得阴阳极间隙中电场扰动和增强。     

一种同轴低电感低抖动多级多通道气体开关

研制了一种触发电极位于放电通道之外、间隙电极为环状不锈钢弹簧的同轴多级多通道气体开关。该开关通过分布电容耦合实现触发,利用多间隙串联减小抖动,利用弹簧不同匝之间电感隔离形成多通道放电。实验表明：该开关触发可靠、电感低（～20nH）、抖动小（～3ns）、触发特性稳定。     

超短脉冲Bessel 光束和空间诱导色散效应

给出了含时的波动方程的一族特解－超短脉冲Bessel光束,其脉冲光束的空间和时间部分可以做分离变量,空间部分在传输过程中保持Bessel光束不变,而时间脉冲部分的传输行为类似于在普通色散介质中的传输,此效应被称之为空间诱导色散效应。     

用红外激光脉冲触发半绝缘GaAs光电导开关的实验研究

报道了用光子能量低于GaAs禁带宽度的红外激光脉冲,触发电极间隙为3mm和8mm的半绝缘GaAs光电导开关的实验结果。使用单脉冲能量为1.9mJ的1 064nm Nd:YAG激光触发开关, 在偏置电压分别为3kV和5kV条件下,光电导开关分别工作于线性和非线性模式。用900nm半导体激光器和1 530nm掺铒光纤激光器分别进行触发实验,得到了重复频率分别为5kHz和20MHz的电脉冲波形。结果表明,半绝缘GaAs光电导开关可以吸收大于本征吸收限波长红外激光脉冲。     

卷绕式螺旋形薄膜介质脉冲形成线设计

采用模块化结构,设计了一种卷绕式螺旋形薄膜介质脉冲形成线,并且对绝缘材料、电极材料的选择依据进行了分析。基于模块化卷绕式脉冲形成线,研制的重复频率脉冲方波产生器采用4个开关同步触发四级形成线模块,从而实现多模块的电压串联叠加,以达到产生高压的目的。开关采用气体火花间隙开关,每级开关及充放电采用电感隔离。研制的脉冲产生器输出电压220 kV,脉冲宽度182 ns,前沿50 ns,可10 Hz重复频率稳定运行。