光谱学方法研究介质阻挡沿面放电辉光模式的电场分布

利用介质阻挡沿面放电装置,在低气压空气中实现了辉光放电模式。利用光电倍增管对放电发光信号进行检测,发现外加电压每半周期出现一个发光脉冲,并且正负半周期的光脉冲是不对称的。利用Photoshop软件处理放电的照片,研究发现平行于高压电极不同位置的发光强度基本相同,然而距离高压电极越远,发光强度减小。放电中总电场由外加电场和电介质积累的壁电荷电场共同决定,确定该电场具有重要意义。通过分析放电的发射光谱中N+₂(B 2Σ+_u→X 2Σ+_g)谱线391.4 nm和N₂的第二正带系(C 3Π_u→B 3Π_g)谱线337.1 nm的比值,可以定性地说明电场的分布。研究发现电场在高压电极附近较大而远离高压电极处较小。这些研究结果对沿面放电的数值模拟和工业应用具有重要的价值。     

Electron irradiation effects in doped high temperature superconductors YBa2Cu3? x M x O y (M = Fe, Ni; x=0; x =0:01)

The influence of irradiation by electrons with an energy of 8 MeV, at dose intervals between 10¹³ and 2×10¹⁸el/cm², on the properties of impurity doped, high-temperature superconductor YBa₂Cu_3−x M _x O _y (M = Fe, Ni; x=0; x=0:01) ceramics has been studied. It has been established that, as the irradiation dose is increased, the onset temperature of the transition to the superconducting state (T _c ^on ), and the intergranular weak link coupling temperature between granules (T _m ^J ), exhibit an oscillation around their initial values of approximately about 1–1.5 K. This oscillation indicates that the process of radiation defect formation in HTSC occurs in multiple stages. It was also found that the critical current (J _c )decreases with an increase of the irradiation dose, and exhibits a local minimum at a dose of 8×10¹⁶el/cm²coinciding with minima for T _c ^on and T _m ^J at this dose. It was found that the introduction of Fe atoms to the ceramic decreases T _m ^J , while introducing Ni atoms decreases both T _c ^on and T _m ^J ; it is suggested that this is a result of Ni substitution of Cu both in Cu2 plane sites and Cu1 chain sites. The introduction of Ni causes a large change in the intergranular critical current density, J _c . A critical irradiation dose is obtained (2×10¹⁸)after which all HTSC parameters strongly decrease, i. e. the superconductivity of HTSC is destroyed.      

stk: A python toolkit for supramolecular assembly

A tool for the automated assembly, molecular optimization and property calculation of supramolecular materials is presented. stk is a modular, extensible and open‐source Python library that provides a simple Python API and integration with third party computational codes. stk currently supports the construction of linear polymers, small linear oligomers, organic cages in multiple topologies and covalent organic frameworks (COFs) in multiple framework topologies, but is designed to be easy to extend to new, unrelated, supramolecules or new topologies. Extension to metal–organic frameworks (MOFs), metallocycles or supramolecules, such as catenanes, would be straightforward. Through integration with third party codes, stk offers the user the opportunity to explore the potential energy landscape of the assembled supramolecule and then calculate the supramolecule's structural features and properties. stk provides support for high‐throughput screening of large batches of supramolecules at a time. The source code of the program can be found at https://github.com/supramolecular-toolkit/stk . © 2018 The Authors. Journal of Computational Chemistry published by Wiley Periodicals, Inc.     

Coupling nanoliter high‐performance liquid chromatography to inductively coupled plasma mass spectrometry for arsenic speciation

Nanoliter high‐performance liquid chromatography shows low consumption of solvents and samples, offering one of the best choices for arsenic speciation in precious samples in combination with inuctively coupled plasma mass spectrometry. A systematic investigation on coupling nanoliter high‐performance liquid chromatography to inductively coupled plasma mass spectrometry from instrument design to injected sample volume and mobile phase was performed in this study. Nanoflow mobile phase was delivered by flow splitting using a conventional high‐pressure pump with reuse of mobile phase waste. Dead volume was minimized to 60 nL for the sheathless interface based on the previously developed nanonebulizer. Capillary columns for nanoliter high‐performance liquid chromatography were found to be sensitive to sample loading volume. An apparent difference was also found between the mobile phases for nanoliter and conventional high‐performance liquid chromatography. Baseline separation of arsenite, arsenate, monomethylarsenic, and dimethylarsenic was achieved within 11 min on a 15 cm C₁₈ capillary column and within 12 min on a 25 cm strong anion exchange column. Detection limits of 0.9–1.8 μg/L were obtained with precisions variable in the range of 1.6–4.2%. A good agreement between determined and certified values of a certified reference material of human urine (GBW 09115) validated its accuracy along with good recoveries (87–102%).     

Development of a highly sensitive high‐performance thin‐layer chromatography method for the screening and simultaneous determination of sofosbuvir,daclatasvir, and ledipasvir in their pure forms and their different pharmaceutical formulations

The combination of sofosbuvir and daclatasvir or sofosbuvir and ledipasvir is now widely used as an ideal treatment for hepatitis C virus infection. For this purpose, a simple, sensitive, accurate, economic, and precise high‐performance thin‐layer chromatography was developed and validated for the determination of sofosbuvir, daclatasvir, and ledipasvir in their pure form as well as their different pharmaceutical products. The method used Merck high‐performance thin‐layer chromatography aluminum plates precoated with silica gel 60 F254 as a stationary phase and mobile phase consisting of methylene chloride/methanol/ethyl acetate/ammonia (25%) (6:1:4:1, v/v/v/v). This system was found to give compact symmetric peaks of sofosbuvir, daclatasvir, and ledipasvir with retardation factors of 0.27 ± 0.01, 0.50 ± 0.007, and 0.68 ± 0.008, respectively. The densitometric scanner was set at 275 nm using a deuterium lamp. The calibration curves were linear over the range of 100–3000 ng/spot for sofosbuvir, and daclatasvir, and range of 50–3000 ng/spot for ledipasvir. The detection limits were 22.5, 31.90, and 15.80 for sofosbuvir, daclatasvir, and ledipasvir. The quantitation limits were 67.50, 95.60, and 47.50 for sofosbuvir, daclatasvir, and ledipasvir. The proposed method was validated according to International Conference on Harmonization (ICH) guidelines and the results were acceptable.     

MgCu metallic glass

We generate an amorphous MgCu model using the rapid solidification of the melt through a first-principles molecular dynamics approach within a generalised gradient approximation and reveal, for the first time, its structural features and mechanical properties in details. The liquid and glassy MgCu are found to acquire slightly distinct local structures. Yet in both forms of MgCu, most Cu atoms have a tendency to form the ideal and defective icosahedrons while Mg atoms are arranged in complex configurations. The mean coordination number of Cu and Mg at 300 K is 11.31 and 13.73, respectively. The short-range order of MgCu glass is projected to be different than the known crystalline MgCu and Mg₂Cu phases. The mechanical properties of MgCu glass and the CsCl-type MgCu crystal are computed and compared. On the basis of the enthalpy analyses, a possible pressure-induced crystallisation of the MgCu glass into a CsCl-type structure is proposed to occur at around 11 GPa.     

Highly alkaline stable anion exchange membranes from nonplanar polybenzimidazole with steric hindrance backbone

The anion exchange membranes (AEMs) with both high ionic conductivity and alkali stability are always the research focus of the AEM fuel cells. Here, a novel nonplanar polymer for AEMs manufacture, mPBI‐TP‐x‐R, with excellent hydroxide stability and satisfactory processability is reported for the first time. The serial mPBI‐TP‐x resins with steric hindrance were prepared by copolymerization among 3,3′,4,4′‐tetraaminobiphenyl, isophthalic acid and tetraphenyl‐terephthalic acid (TP) in different ratios under microwave condensation. The copolymers mPBI‐TP‐x were quaternized at N1/N3‐sites of benzimidazole unit in backbone with alkyl groups (R?CH₃, C₂H₅, n‐C₃H₇, or n‐C₄H₉) to prepare soluble ionomers, and the corresponding membranes in hydroxyl ion form were prepared by a solution casting method and subsequent ion‐exchange process. The chemical structure of all membranes was characterized using FTIR and ¹H NMR spectroscopy. The properties of ion exchange capacity, water uptake, swelling ratio, tensile strength, ionic conductivity, and alkaline stability were measured. Among the prepared membranes, the mPBI‐TP‐15%‐(n‐Bu) exhibited the excellent alkaline stability (only degradation ca. 5% under 1M NaOH aqueous solution at 60 °C for 800 h) and satisfactory OH^? conductivity (46.66 mS/cm at 80 °C). The current research provides a useful exploration to commercial application of alkaline fuel cell. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 1087–1096     

Beyond Oxides: Nitride as a Ligand in a Neutral IrIXNO3 Molecule Bearing a Transition Metal at High Oxidation State

Theoretical calculations utilizing relativistic ZORA Hamiltonian point to the conceivable existence of an IrNO₃ molecule in C_3v geometry. This minimum is shown to correspond to genuine nonavalent iridium nitride trioxide, which is a neutral analogue of cationic [IrO₄]⁺ species detected recently. Despite the presence of nitride anion, the molecule is protected by substantial barriers exceeding 200 kJ mol⁻¹ against transformations leading, for example, to global minimum (O=)₂Ir−NO, which contains metal at a lower formal oxidation state.