拟多维高效液相色谱法分离纯化双峰驼精清中的活性蛋白

利用一种新的高效液相色谱洗脱技术，建立了 ｐＨ缓冲液／离子对二元洗脱模式，对双峰驼精清的两种提取物的反相柱上进行了分离，得到了较纯的活性蛋白组分。该法操作简单、快速、比常规ＨＰＬＣ有更高的选择性及峰容量，并可减少活性蛋白的失活。     

制备高比表面积碳化硅的几种影响因素

采用溶胶凝胶法，以蔗糖和正硅酸乙酯(TEOS)为原料，草酸为TEOS水解的催化剂，制备均相碳化硅前驱体，在氩气氛和高温条件下(1 350～1 600 ℃)将碳化硅先驱体进行碳热还原，制备出高比表面积的SiC。考察了水/TEOS物质的量的比、碳/硅物质的量的比及镍盐等因素对碳化硅比表面积的影响。结果表明，当n_water/n_TEOS=7.5，n_C/n_Si=4时，适宜的镍催化剂(n_Ni/n_TEOS=0.005)，凝胶形成的时间最短，镍盐的加入可使碳热还原温度降低200 ℃。     

High purity gadolinium by the electrolysis of GdF3

The anodic overvoltage on carbon and platinum electrodes in the electrochemical production of high purity gadolinium from molten 75 LiF-25 mol% GdF₃ solutions is discussed. At the cell temperature of 840°C calciumimpregnated anodes led to the reduction of inert electrode films and to a current yield of nearly 100%.The deposited gadolinium contained 75, 22, 54 and less than 100 ppm of the interstitial elements H, N, O and C respectively; the concentrations of the highest other analysed impurities were: Si (89), Fe (15), Y (5), Zr (3), Nd (3), Tb (71), Ta (49), W (23) and Re (<3 ppm).Partly performed at the Ames Laboratory—U.S. Department of Energy.     

单分散交联聚甲基丙烯酸环氧丙酯树脂的制备及亲合纯化伴刀豆球蛋白-A

采用一步种子溶胀聚合法制备了颗粒呈单分散的交联聚甲基丙烯酸环氧丙南树脂，对其环氧基的组成比进行了表征，并以氨基葡萄糖为配基，首次制备了纯化粗品伴刀豆球蛋白-A(Ⅲ）(Con-A，Ⅲ)的聚合物基质的高效亲合色谱柱。配基在树脂上的键合量为8．2mg／g，对纯化后的Con-A（Ⅲ）的吸附量为13．4mg／g。使用该亲合色谱介质成功地从粗品Con-A中快速纯化了Con-A，电泳分析显示为一个主要的谱带，纯度从15％提高到95％。     

Electrochemical instability of bis(trifluoromethylsulfonyl)imide based ionic liquids as solvents in high voltage electrolytes for potassium ion batteries

1. Download : Download high-res image (153KB)
2. Download : Download full-size image

     

氰氟草酯及其代谢物在稻田水、土壤和稻株中的残留分析方法

研究并建立了氰氟草酯及其 4种代谢物在稻田水、土壤及稻株中的残留分析方法。在同一色谱分析条件下 ,同时检测 5种化合物 ,样品前处理过程简单 ,方法准确可靠 ,灵敏度和准确度达到了农药残留检测的要求。氰氟草酯及 4种代谢物在上述样品中的最低检知浓度在 0 .0 2～ 0 .0 0 4mg kg之间 ,方法的添加回收率(0 .0 1～ 5mg kg)在 80 .2 %～ 1 0 1 .2 %之间     

INTROMISSION OF WATER-REPELLENT AND HYDROSCOPIC PROPERTIES SIMULTANEOUSLY TO PP BY PLASMA DISCHARGE METHOD

Plasma-induced surface graft copolymerization of acrylic acid on polypropylene non-woven fabric (PP-g-AA) and polypropylene membrane were reported. The extents of grafting were controlled by the plasma and polymerization condition. Hexadecyltrimethyl ammonium bromide was then coupled with the carboxyl group of PP-g-AA to obtain a polyion complex (PIC). At last, CF4 plasma was used to give PICs hydrophobic property. The moisture regain and water-repellency of the processed PICs was investigated. The surfaces were characterized using ATR FT-IR and XPS. The result indicates that the products have very high ability to adsorb moisture, even better than cotton fiber. At the same time, the products show excellent hydrophobic property, which can‘t be wetted by those reagents whose surface tensions were higher than 327mN/m.     

Towards advanced circuit board materials: adhesion of copper foil to ultra‐high molecular weight polyethylene composite

Polyethylene based composites are attractive materials for advanced circuit board applications because of their unique combination of properties: low dielectric constant and loss factor, light weight, high flexural modulus and low thermal expansion coefficient controlled in all spatial directions. This investigation describes a process to consolidate chopped fibers of ultra‐high molecular weight polyethylene concurrently with its bonding to a copper foil. Bonding is affected by a thin sheet of low‐density polyethylene, incorporating a crosslinking agent with a concentration gradient across the sheets thickness. In this single step process, the composite material is formed and bonded to the metal foil, achieving good adhesion without the use of extraneous glue. Copyright © 2002 John Wiley & Sons, Ltd.     

Application of High Pressure-DTA for High Pressure-liquid Phase Epitaxy of Doped Mercury and Thallium HTS Formations

The fabrication method of superconducting thin films of compositions HgBa₂Ca₂Cu₃O_8+δ (Hg-1223) and Tl₂Ba₂CuO_y (2201) on single-crystalline SrTiO₃ and LaAlO₃ substrates is reported. The highest obtained T _c was 134 K and J _c over 10⁶ A cm^–2 at 77 K. High pressure DTA(HP-DTA) was applied to grow mercury- and thallium-based high-temperature superconducting crystals and thin films, to identify melting points of particular phases within these oxide systems and determine suitable processing conditions. The DTA system operates at the: maximum temperature of 1200°C, volume up to 5 cm³, working pressure up to 1.5 GPa and at a working atmosphere — inert gas with up to 25% oxygen. This revised version was published online in August 2006 with corrections to the Cover Date.     

On the pressure-induced phase transformation in the structure II clathrate hydrate of tetrahydrofuran

A high-pressure phase of the clathrate hydrate of tetrahydrofuran was prepared by freezing a liquid phase of overall composition THF · 7 H₂O under a pressure of 3.0 kbar, or by pressurizing the solid structure II THF hydrate of 255K to 3.4 kbar. Unfortunately, the products recovered at 77K were always mixed phase materials as shown by X-ray powder diffraction. A number of diffraction lines could be indexed in terms of the cubic structure I hydrate with a slightly expanded lattice parameter, 12.08 Å, giving some support to Dyadin's idea that the high pressure phase transition involves a conversion of Structure II to Structure I. Other phases observed in the recovered product include Ice IX and amorphous materials. The reversion of the high pressure sample to the structure II hydrate was followed by differential scanning calorimetry. At ambient pressure, the high pressure sample converts slowly back to Structure II hydrate event at 77K.NRCC No. 35786.