Measurement and prediction of solubilities and diffusion coefficients of carbon dioxide in starch–water mixtures at elevated pressures

The solubility and diffusion coefficient of carbon dioxide in intermediate‐moisture starch–water mixtures were determined both experimentally and theoretically at elevated pressures up to 16 MPa at 50 °C. A high‐pressure decay sorption system was assembled to measure the equilibrium CO₂ mass uptake by the starch–water system. The experimentally measured solubilities accounted for the estimated swollen volume by Sanchez–Lacombe equation of state (S‐L EOS) were found to increase almost linearly with pressure, yielding 4.0 g CO₂/g starch–water system at 16 MPa. Moreover, CO₂ solubilities above 5 MPa displayed a solubility increase, which was not contributed by the water fraction in the starch–water mixture. The solubilities, however, showed no dependence on the degree of gelatinization (DG) of starch. The diffusion coefficient of CO₂ was found to increase with concentration of dissolved CO₂, which is pressure‐dependent, and decrease with increasing DG in the range of 50–100%. A free‐volume‐based diffusion model proposed by Areerat was employed to predict the CO₂ diffusivity in terms of pressure, temperature, and the concentration of dissolved CO₂. S‐L EOS was once more used to determine the specific free volume of the mixture system. The predicted diffusion coefficients showed to correlate well with the measured values for all starch–water mixtures. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 607–621, 2006     

Stereoselective synthesis of cis-p-menth-8-ene-1,7-diol, cis-p-menthane-1,7-diol, and cis-p-menthane-1,7,8-triol

The natural products cis-p-menthane-1,7-diol (cis-IV), cis-p-menth-8-ene-1,7-diol (cis-I) and cis-p-menthane-1,7,8-triol (cis-II) are obtained starting from the corresponding cis-cyanohydrins, cis-2 and cis-7, respectively, by chemical transformation of the cyano into the hydroxymethyl group. The key step of the synthesis is the very high cis-selectivity (> or = 96 %) of the MeHNL-catalyzed HCN addition to 4-alkylcyclohexanones. From 4-isopropylcyclohexanone (1) the cyanohydrin cis-2 and from 4-(1-methylvinyl)cyclohexanone (6) the cyanohydrin cis-7 result almost quantitatively. Regioselective hydroxylation of cis-I affords the triol cis-II. X-ray crystal structure determinations of the final products confirm their cis-configuration.     

配位聚合物{[MnL][FeⅡFeⅢ(ox)3·1.5H2O]}∞的合成及其磁学性质

合成和表征了一种新的Schiff碱配合物MnL(ClO4)*3H2O(1)(其中L为n(水杨醛)∶n(二乙撑三胺)=1∶1缩合而成的Schiff碱).1与FeSO4*7H2O和K3[Fe(ox)3]*3H2O(ox=oxalate)进一步反应,生成了双金属层状配位聚合物{[MnL][FeⅡFeⅢ(ox)3]*1.5H2O}∞(2).IR和Mssbauer谱测定结果表明,2具有二维层状结构,其阴离子层由[FeⅡFeⅢ(ox)3]-单元构成.变温磁化率(5K～100K)测试结果表明,2中的自旋载体之间存在反铁磁交换作用.5K时的磁滞现象表明2在低温时可能存在铁磁有序,这可能是亚铁磁或自旋倾斜造成的.     

Synthesis of the first stable carborane containing simple enol

A carborane-containing stable simple enol — 1-2-isopropyl-o-carboran-I-yl)-1-phenyl2-mesityl-2-lrydroxyctlrylcne — has been synthesized. This enol does not isomerize to the starting ketone or keto-enol mixture even after prolonged heating in benzene in the presence of CF₃COOH.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1561–1563, June, 1996.     

Electrochemical synthesis of coatings in the system Ti-Si-B from molten salts

Powder and coatings of metal-like refractory compounds (MLRC) can be produced by electrochemical synthesis from molten salts. The stoichiometry of the deposited MLRC was found to correlate with the molar ratio of MLRC component ions in the melts. The system Ti-Si-B is of particular interest in terms of electrochemical synthesis since the titanium, silicon and boron potentials in the melt are close together. The electrochemical synthesis has been investigated in the system NaCl-KCl-NaF-K₂TiF₆-K₂SiF₆-KBF₄ at 700°C. The opportunity of deposition of new ternary compound in the system Ti-Si-B is shown by the electrochemical synthesis from molten salts.     

Spectral and Thermal Studies of Rare Earth Element 3-methylglutarates

Conditions for the formation of rare earth element (Y, La–Lu) 3-methylglutarates were studied and their quantitative composition and solubilities in water at 293 K were determined (10^–2 mol dm^–3). The IR spectra of the prepared complexes with general formula Ln₂(C₆H₈O₄)₃ nH₂O (n=3–8) were recorded and their thermal decomposition in the air were investigated. During heating the hydrated 3-methylglutarates are dehydrated in one step and next anhydrous complexes decompose to oxides Ln₂O₃ with intermediate formation Ln₂O₂CO₃ (Y, La, Nd–Gd) or directly to the oxides, Ln₂O₃, CeO₂, Pr₆O₁₁ and Tb₄O₇ (Ce, Pr, Tb–Lu). This revised version was published online in August 2006 with corrections to the Cover Date.     

Organometallic Syntheses with Diazoalkanes

In recent years, aliphatic diazo compounds have proved to be more and more versatile as reagents in the preparative chemistry of organometallic complexes. As readily accessible compounds, they are not only suitable for the synthesis of known kinds of metal complexes but also open fresh routes to novel complex systems. The comparatively new field of diazoalkane complex chemistry exhibits numerous unexpected and novel reactions, and introduces interesting and promising aspects into the chemistry of carbonylmetal compounds.     

Total synthesis of dapiramicin B

The first total synthesis of dapiramicin B, a nucleoside antibiotic, is described. The characteristic N-glycoside linkage in dapiramicin B was effectively constructed by way of the Pd-catalyzed coupling reaction of a heptopyranosylamine with a bromopyrrolopyrimidine derivative.     

Preparation of Y2Ba4Cu7O15-δ Superconductor without High Oxygen Pressure

The synthesis of bulk Y₂Ba₄Cu₇O_15-δ superconductor at atmospheric oxygen pressure via solid state sintering is reported. Temperature ranging from 860 to 890 °C as well as time interval over 2 to 15 days were used to investigate the formation of the Y₂Ba₄Cu₇O_15-δ phase. A time-temperature profile characterizing the conditions for the preparation of Y₂Ba₄Cu₇O_15-δ phase suggests the optimal condition to be sintering at 890 °C for over 10 days. Detailed results of X-ray diffraction, electrical resistivity, iodometric titration and magnetization measurements are described.     

Total synthesis of (±)-cyclooroidin

The first total synthesis of (±)-cyclooroidin, a member of the pyrrole-imidazole alkaloid family recently isolated from the sponge Agelas oroides in optically pure form, is described. The synthesis was achieved in nine linear steps, with an overall yield of 10%. Key step was a Wolff bromoketone synthesis performed on the intermediate longamide B.