10MW串级脉冲发电机的理论、设计、实验及应用研究

 脉冲发电机具有小型、机动、灵活、可靠、寿命长等特点, 作为高功率固体激光器和加速器电源是一新的技术路线。比较了各种类型脉冲电源的性能指标,解释了旋转磁通压缩和串级原理,提出串级脉冲发电机的自激、偏极与双机同壳概念,给出电机的设计公式,10MW串级脉冲发电机的设计、实验及在强激光与粒子束领域中的潜在应用。     

Analysis on electrical characteristics of high-voltage GaN-based light-emitting diodes

<正>In order to investigate their electrical characteristics,high-voltage light-emitting-diodes(HV-LEDs) each containing four cells in series are fabricated.The electrical parameters including varying voltage and parasitic effect are studied. It is shown that the ideality factors(IFs) of the HV-LEDs with different numbers of cells are 1.6,3.4,4.7,and 6.4.IF increases linearly with the number of cells increasing.Moreover,the performance of the HV-LED with failure cells is examined.The analysis indicates that the failure cell has a parallel resistance which induces the leakage of the failure cell.The series resistance of the failure cell is 76.8Ω,while that of the normal cell is 21.3Ω.The scanning electron microscope(SEM) image indicates that different metal layers do not contact well.It is hard to deposit the metal layers in the deep isolation trenches.The fabrication process of HV-LEDs needs to be optimized.     

均匀聚焦磁场中束晕-混沌的孤子控制

采用粒子.束核模型,对均匀聚焦磁场中满足K-V分布的离子束进行模拟研究.观察到束晕.混沌现象,基于束晕.混沌的非线性控制策略,提出控制束晕.混沌的孤子函数控制器,并给出具体的实施方案.模拟研究表明,运用这种方法可以消除束晕及其再生现象,达到对束晕.混沌的有效控制.     

In situ measurement on nonuniform velocity distributionin external detonation exhaust flow by analysis ofspectrum features using TDLAS

Instantaneous and precise velocity sensing is a critical part of research on detonation mechanism and flow evolution.This paper presents a novel multi-projection tunable diode laser absorption spectroscopy solution,to provide a real-time and reliable measurement of velocity distribution in detonation exhaust flow with obvious nonuniformity.Relations are established between overlapped spectrums along probing beams and Gauss velocity distribution phantom according to the frequency shifts and tiny variations in components of light-of-sight absorbance profiles at low frequencies analyzed by the fast Fourier transform.With simulated optical measurement using H2O feature at 7185.6 cm-1 carried out on a phantom generated using a simulation of two-phase detonation by a two-fluid model,this method demonstrates a satisfying performance on recovery of velocity distribution profiles in supersonic flow even with a noise equivalent absorbance up to 2×10^-3.This method is applied to the analysis of rapidly decreasing velocity during a complete working cycle in the external flow field of an air-gasoline detonation tube operating at 25 Hz,and results show the velocity in the core flow field would be much larger than the arithmetic average from traditional tunable diode laser doppler velocimetry.This proposed velocity distribution sensor would reconstruct nonuniform velocity distribution of high-speed flow in low cost and simple operations,which broadens the possibility for applications in research on the formation and propagation of external flow filed of detonation tube.     

Spin Transport in a Rashba Ring-Quantum Dot System Pumped by Microwave Fields

We report a theoretical study on producing electrically spin-polarized current in the Rashba ring with parallel double dots embedded, which are subject to two time-dependent microwave fields. By means of the Keldysh Green's function method, we present an analytic result of the pumped current at adiabatic limit and demonstrate that the interplay between the quantum pumping effectand spin-dependent quantum interference can lead to an arbitrarily controllable spin-polarized current in the device. The magnitude and direction of the charge and spin current can be effectively modulated by system parameters such as the pumping phase difference, Rashba precession phase, and the dynamic phase difference of electron traveling in two arms of ring; moreover, thespin-polarization degree of the charge current can also be tuned in the range [-∞, +∞]. Our findings may shed light on the all-electric way to produce the controllable spin-polarized charge current in the field of spintronics.     

Tunable and highly sensitive temperature sensor based on graphene photonic crystal fiber

Optical fiber temperature sensors have been widely employed in enormous areas ranging from electric power industry, medical treatment, ocean dynamics to aerospace. Recently, graphene optical fiber temperature sensors attract tremendous attention for their merits of simple structure and direct power detecting ability. However, these sensors based on transfer techniques still have limitations in the relatively low sensitivity or distortion of the transmission characteristics, due to the unsuitable Fermi level of graphene and the destruction of fiber structure, respectively. Here, we propose a tunable and highly sensitive temperature sensor based on graphene photonic crystal fiber (Gr-PCF) with the non-destructive integration of graphene into the holes of PCF. This hybrid structure promises the intact fiber structure and transmission mode, which efficiently enhances the temperature detection ability of graphene. From our simulation, we find that the temperature sensitivity can be electrically tuned over four orders of magnitude and achieve up to ～ 3.34×10^-3 dB/(cm·℃) when the graphene Fermi level is ～ 35 meV higher than half the incident photon energy. Additionally, this sensitivity can be further improved by ～ 10 times through optimizing the PCF structure (such as the fiber hole diameter) to enhance the light-matter interaction. Our results provide a new way for the design of the highly sensitive temperature sensors and broaden applications in all-fiber optoelectronic devices.     

Pressure dependence of the thermal stability in LiMn2O4

Structural stability in terms of the decomposition temperature in LiMn₂O₄ was systematically investigated by a series of high-temperature and high-pressure experiments.LiMn₂O₄ was found to have structural stability up to 5 GPa at room temperature.Under ambient pressure,the compound decomposed at 1300℃.The decomposition temperature decreased with increasing pressure,yielding more complex decomposed products.Below the decomposition temperature,the crystal structure of LiMn₂O₄ varied with pressure.The presented results in this study offer new insights into the thermal and pressure stability of LiMn₂O₄ materials as a cathode for lithium-ion batteries that can operate under extreme conditions.Therefore,these findings may serve as a useful guide for future work for improving lithium-ion batteries.     

超导电力技术新进展及其未来发展的思考

近年来高温超导材料研究取得很大进展,它在电力领域的应用研究已受到广泛关注,一些示范样机,诸如高温超导输电电缆、变压器、故障电流限制器、电机和储能装置已经研制成功并投入示范性试验.超导技术是21世纪具有战略经济意义的高新技术,文章将介绍高温超导电力应用研究的新进展及其未来发展的思考。     

爆电换能脉冲大电流输出研究

 基于爆电换能原理,使用掺铌的PZT 95/5陶瓷组装换能器件,在垂直工作模式下,对爆电电源LRC电路响应进行了理论分析,并开展了脉冲大电流输出实验研究。实验采用多组PZT 95/5铁电陶瓷并联,利用平面波发生器作为冲击加载手段,获得了峰值5 kA以上的脉冲大电流,初始电流上升速率可达10~20 GA/s。实验结果与理论设计符合较好。     

The pressure-induced phase transition of the solid β–HMX

The structural, vibrational and thermodynamic properties of β-octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (β–HMX) crystal have been studied using the isothermal-isobaric molecular dynamics (NPT-MD) simulations. The variations of cell volume, lattice constants and molecular geometry of solid β–HMX are presented and discussed at different pressure and temperature. It was found that the N–N bond is significantly lengthened with increasing temperature, which suggests that it is relevant to the initial decomposition. An abrupt change at 27 Gpa for the volume and internal geometrical parameters was observed. This is in good accord with the experimental observation that there is a phase transition at 27 GPa, which is clearly due to conformational change, not chemical reaction. The vibrational frequencies at ambient conditions agree well with experimental results, and the pressure/temperature-induced frequency shifts of these modes are discussed. Frequency discontinuity was also observed at pressure when the phase transition occurred. The Grüneisen parameter was obtained using the vibrational frequency.