Simulation of the instability of an accelerating gaseous envelope

The development of perturbations of the parameters of a dense gaseous envelope traveling with an acceleration driven by a difference in the pressures on either side is investigated numerically. Plane and axisymmetric time-dependent flows of a compressible medium are considered. The effect of both the density of the envelope and the form of the initial perturbations of its shape and motion on the mass cumulation in the compactions formed is studied. The evolutions of the perturbations of a layer and the surface of a contact discontinuity accelerated by an impinging plane shock wave are compared.     

Effect of the incomplete accommodation of the heterogeneous recombination energy on heat fluxes to a quartz surface

Taking both the heterogeneous catalytic processes, including the surface formation of particles with excited internal degrees of freedom, and the processes of multicomponent diffusion and heat transfer in the MESOX apparatus fully into account makes it possible to obtain a recombination coefficient and an accommodation coefficient of the oxygen-atoms-on-quartz recombination energy which are in good agreement with the experimental data. The heterogeneous catalysis model constructed can be used effectively for predicting the heat fluxes to the surface of reentry vehicles on their entry into the Earth’s atmosphere.     

Dispersion analysis of the least‐squares finite‐element shallow‐water system

The frequency or dispersion relation for the least‐squares mixed formulation of the shallow‐water equations is analysed. We consider the use of different approximation spaces corresponding to co‐located and staggered meshes, respectively. The study includes the effect of Coriolis, and the dispersion properties are compared analytically and graphically with those of the mixed Galerkin formulation. Numerical solutions of a test problem to simulate slow Rossby modes illustrate the theoretical results. Copyright © 2003 John Wiley & Sons, Ltd.     

Statistical approach to light scattering from deformed textured heterogeneous polymer materials

A statistical theory of light scattering from deformed isotropic and textured heterogeneous polymer materials is formulated. Two types of textured structures are analyzed: assemblies of optically isotropic and anisotropic rods and a spatially anisotropic distribution of isotropic spherical inclusion centers. The small-angle H_v light-scattering patterns are calculated. The appearance of scattering from isotropic rods and spheres in deformed materials has been demonstrated. The changes of the H_v scattering patterns as a function of elongation and strucuture parameters are discussed. © 1993 John Wiley & Sons, Inc.     

Standing waves, clustering, and phase waves in 1D simulations of kinetic relaxation oscillations in NO+NH3 on Pt(1 0 0) coupled by diffusion

The Lombardo–Imbihl–Fink (LFI) ODE model of the NO+NH₃ reaction on a Pt(1 0 0) surface shows stable relaxation oscillations with very sharp transitions for temperatures T between 404 and 433 K. Here we study numerically the effect of linear diffusive coupling of these oscillators in one spatial dimension. Depending on the parameters and initial conditions we find a rich variety of spatio-temporal patterns which we group into four main regimes: bulk oscillations (BOs), standing waves (SW), phase clusters (PC), and phase waves (PW). Two key ingredients for SW and PC are identified, namely the relaxation type of the ODE oscillations and a nonlocal (and nonglobal) coupling due to relatively fast diffusion of the kinetically slaved variables NH₃ and H. In particular, the latter replaces the global coupling through the gas phase used to obtain SW and PC in models of related surface reactions. The PW exist only under the assumption of (relatively) slow diffusion of NH₃ and H.     

Evaluation of the Kushida Method of short-term earthquake prediction

Kushida and Kushida found that FM radio waves from stations at distances over-the-horizon are received before earthquakes. Based on this finding, since the mid-1990’s, the Kushidas have been practicing “Earthquake Precursor Detection Experiment”. The performance of the Kushida method during 2000–2003 has been evaluated by checking their predictions against the actual seismicity. During the period, there were 92 Kushida predictions mentioning the possibility of M ≥ 5.5 event, whereas there were 49 M ≥ 5.5 earthquakes in the Japanese region. If the criteria for successful prediction are set as: the errors in date is less than one day, epicentral position is roughly within specified area, and error in M is less than 0.5, the success rate was 20% and the alarm rate was 12%. If we relax the criteria to: the errors in dates within 10 days, epicenter within additional 100 km of specified area and the magnitude error less than 1.0, the success rate was 40% and the alarm rate was 27%. These rates may look insufficient for a practical prediction method. Considering, however, the fact that no other short-term prediction has ever been made in Japan so far it is a significant achievement. Moreover, it was found that in almost all failed predictions, meaningful signals were detected although the interpretations were incorrect. This indicates that the method is promising provided further investigation is carried out. The same evaluation at the M ≥ 6.0 level showed that the general performance was similar to the M ≥ 5.5 level, except that both success rate and alarm rate were lower at the M ≥ 6.0 level. If this unexpected finding is real, it might be inherent to the methodology using scattering of short-wave length radio waves as suggested by M. Hayakawa and may contain important information in understanding the earthquake physics and LAI-coupling. The results of the present study indicate strongly that the earthquake prediction research using anomalous transmission of VHF FM radio waves should be enhanced in parallel with complementary research in other frequency ranges.     

A millimeter-wave geometric phase interferometer

A millimeter-wave interferometer operating purely on the geometric phase is presented. Like its optical counterpart described by Hariharan and Roy, this system uses two circular polarizers with a half-wave section in between. The geometric phase of each signal is determined by the orientation of the half-wave section.     

Numerical Analysis and Simulation Analysis for Space‐Time Data

Spatio temporal dynamics of the positive column of a dc neon glow discharge is studied and investigated experimentally and theoretically. Spatio temporal analysis by means of biorthogonal decomposition method (BOD) gives insights into the mechanism of irregularity and can be employed for characterization of spatio‐ temporal complexity. In the weak nonlinear region, the wave dynamics is approximated by an amplitude equation of the Ginzburg‐Landau equation (CGLE) with complex coefficients and an additional integral term based on a fluid model. In the present work we deal with irregular spatio‐temporal data. A comparison between the numerical analysis of the experimental data and simulation results are studied. A good agreement between the dynamical behaviour for experimental space‐time data and theoretical simulation space‐time results was obtained. (© 2006 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Experimental investigation of the aquatic propulsion caused by localised flexural wave propagation in immersed wedges and plates

This paper describes the results of the experimental verification of the idea of wave-like aquatic propulsion of autonomous and man-inhabited vessels first published about 10 years ago by one of the present authors (V.V.K.). The idea is based on employing the unique type of localised flexural elastic waves propagating along edges of wedge-like structures immersed in water (wedge elastic waves). Such wedge-like structures supporting localised elastic waves can be attached like fish fins to a body of a small ship or a submarine and used for their propulsion. The proposed principle of employing localised flexural waves as a source of aquatic propulsion has been biologically inspired by the specific swimming mode used in nature by stingrays. To verify the idea experimentally, the first working prototype of a small catamaran using the above-mentioned wave-like propulsion via the attached rubber keel has been build and tested in Loughborough University. The tests have been carried out in two phases, in a water tank and then in open water. The test results have shown that the catamaran was propelled very efficiently and could achieve the speed of 36 cm/s, i.e., about one vehicle length per second, thus demonstrating that the idea of wave-like propulsion of small man-inhabited craft is viable. The reported proof of the viability of this idea may open new opportunities for marine craft propulsion, which can have far reaching implications.     

Air‐stable and recoverable catalyst for copper‐catalyzed controlled/living radical polymerization of styrene; In situ generation of Cu(I) species via electron transfer reaction

Copper‐catalyzed controlled/living radical polymerization (LRP) of styrene (St) was conducted using the silica gel‐supported CuCl₂/N,N,N′,N′,N″‐pentamethyldiethylenetriamine (SG‐CuCl₂/PMDETA) complex as catalyst at 110 °C in the presence of a definite amount of air. This novel approach is based on in situ generation and regeneration of Cu(I) via electron transfer reaction between phenols and Cu(II). Sodium phenoxide or p‐methoxyphenol was used as a reducing agent of Cu(II) complexes in LRP. The number–average molecular weight, M_n,GPC, increases linearly with monomer conversion and agrees well with the theoretical values up to 85% conversion The molecular weight distribution, M_w/M_n, decreases as the conversion increases and reaches values below 1.2. The catalyst was recovered in aerobic condition and reused in copper‐catalyzed LRP of St. For the second run, the number–average molecular weights increased with monomer conversion and the polydispersities decreased as the polymerization proceeded and reached to the value <1.3 at 81% conversion. The recycled catalyst retained 90% of its original activity in the subsequent polymerization. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 77–87, 2006