Rational Synthesis of Iron/Nitrogen-Doped Carbon Catalyst through a Spatial Isolation Strategy for Efficient Oxygen Reduction in Acidic and Alkaline Media

It remains challenging to rationally synthesize iron/nitrogen-doped carbon (Fe/N-C) catalysts with rich Fe−N_x atomic active sites for improved oxygen reduction reaction (ORR) electrocatalysis. A highly efficient Fe/N-C catalyst, which has been synthesized through a spatial isolation strategy, is reported. Derived from bioinspired polydopamine (PDA)-based hybrid microsphere precursors, it is a multifunctional carrier that loads atomically dispersed Fe³⁺/Zn²⁺ ions through coordination interactions and N-rich melamine through electrostatic attraction and covalent bonding. The Zn²⁺ ions and melamine in the precursor efficiently isolate Fe³⁺ atoms upon pyrolysis to form rich Fe−N_x atomic active sites, and generate abundant micropores during high-temperature treatment; as a consequence, the resultant Fe-N/C catalyst contains rich catalytically active Fe−N_x sites and a hierarchical porous structure. The catalyst exhibits improved ORR activity that is superior to and close to that of Pt/C in alkaline and acidic solutions, respectively.     

第一性原理计算N掺杂对InNbO4电子结构的影响

宽带隙（3.83 eV）半导体光催化材料InNbO4在紫外光作用下具有分解水和降解有机物的性能。最近实验发现了N掺杂InNbO4具有可见光下分解水制氢的活性。为了从理论上解释这一实验现象，本文采用基于密度泛函理论的第一性原理计算了N掺杂对InNbO4的能带结构、态密度和光学性质的影响。分析能带结构可得，N掺杂后在InNbO4的价带（O 2p）上方形成N 2p局域能级，导致电子跃迁所需的能量减小。吸收光谱表明，N掺杂后InNbO4的光吸收边出现了红移，实现了可见光吸收。     

Improved efficiency of organic solar cells with modified hole‐extraction layers

The aim of this work has been to study the influence of modified hole‐extraction layers on the performance of organic solar cells (OSCs) based on blends of poly (3‐hexylthiophene) and [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester. The hole‐extraction layers consist of poly (3,4‐ethylene dioxythiophene):polystyrene sulfonic acid (PEDOT:PSS) doped with different concentrations of bromine. Compared with pristine OSC without adding bromine to the hole‐extraction layer, the bromine‐doped OSCs show a 49% increase in the power conversion efficiency (from 2.12 to 3.16%), which could be attributed to the increase of electrical and optical properties of PEDOT:PSS films after the addition of bromine. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 50: 125–128, 2012     

Photocatalytic activity of divalent ion (copper,zinc and magnesium) doped NiAl2O4

Nickel aluminate (NiAl₂O₄) and doped nickel aluminate (Ni_1-xM_xAl₂O₄; M = Mg, Zn, Cu; x = 0.1) were prepared by sol-gel method using citric acid. The synthesized compounds were analyzed by various techniques such as powder XRD, FTIR, SEM-EDAX and UV-DRS. The lattice parameter was found to increase with the copper, zinc and magnesium doping in nickel aluminate. The band gap was decreased from 3.0 eV (NiAl₂O₄) to 2.9 (zinc doped), 2.7 eV (magnesium doped) and increased to 3.1 eV in the case of copper doping. The catalytic study was carried out for a cationic (methylene blue) and an anionic dye (methyl orange). The percentage degradation of methyl orange using Zn_0.1Ni_0.9Al₂O₄ and Mg_0.1Ni_0.9Al₂O₄ was found to be 92% (180 min) and 96% (90 min). 93% (120 min) and 97% (120 min) degradation of methylene blue was observed using zinc doped and magnesium doped nickel aluminate respectively. These results are comparatively higher than its parent analogue (94% (180 min) degradation against methyl orange and 91% (120 min) against methylene blue). Whereas the percentage degradation was found to be less in the case of Cu_0.1Ni_0.9Al₂O₄ (83% (180 min) against methyl orange and 90% (120 min) against methylene blue).     

Engineering Lithium Ions Embedded in NiFe Layered Double Hydroxide Lattices To Activate Laminated Ni2+ Sites as High-Efficiency Oxygen Evolution Reaction Catalysts

NiFe layered double hydroxides (LDHs) have been denoted as benchmark non-noble-metal electrocatalysts for the oxygen evolution reaction (OER). However, for laminates of NiFe LDHs, the edge sites are active, but the basal plane is inert, leading to underutilization as catalysts for the OER. Herein, for the first time, light and electron-deficient Li ions are intercalated into the basal plane of NiFe LDHs. The results of theoretical calculations and experiments both showed that electrons would be transferred from near Ni²⁺ to the surroundings of Li⁺, resulting in electron-deficient properties of the Ni sites, which would function as “electron-hungry” sites, to enhance surface adsorption of electron-rich oxygen-containing groups, which would enhance the effective activity for the OER. As demonstrated by the catalytic performance, the Li−NiFe LDH electrodes showed an ultralow overpotential of only 298 mV at 50 mA cm⁻², which was lower than that of 347 mV for initial NiFe LDHs and lower than that of 373 mV for RuO₂. Reasonable intercalation adjustment effectively activates laminated Ni²⁺ sites and constructs the electron-deficient structure to enhance its electrocatalytic activity, which sheds light on the functional treatment of catalytic materials.     

Synergism of Interface and Electronic Effects: Bifunctional N-Doped Ni3S2/N-Doped MoS2 Hetero-Nanowires for Efficient Electrocatalytic Overall Water Splitting

The realization of water electrolysis on the basis of highly active, cost-effective electrocatalysts is significant yet challenging for achieving sustainable hydrogen production from water. Herein, N-doped Ni₃S₂/N-doped MoS₂ 1D hetero-nanowires supported by Ni foam (N-Ni₃S₂/N-MoS₂/NF) are readily synthesized through a chemical transformation strategy by using NiMoO₄ nanowire array growth on Ni foam (NiMoO₄/NF) as the starting material. With the in situ generation of Ni₃S₂/MoS₂ heterointerfaces within nanowires and the incorporation of N⁻ anions, an extraordinary hydrophilic nature with abundant, well-exposed active sites and optimal reaction dynamics for both oxidation and reduction of water are obtained. Attributed to these properties, as-converted N-Ni₃S₂/N-MoS₂/NF exhibits highly efficient electrocatalytic activities for both hydrogen and oxygen evolution reactions under alkaline conditions. The superior bifunctional properties of N-Ni₃S₂/N-MoS₂/NF enable it to effectively catalyze the overall water-splitting reaction.     

Exploring the Phase-Selective,Green, Hydrothermal Synthesis of Upconverting Doped Sodium Yttrium Fluoride: Effects of Temperature,Time, and Precursors

The aim of this work was i) to develop a hydrothermal, low-temperature synthesis protocol affording the upconverting hexagonal phase NaYF₄ with suitable dopants while adhering to the “green chemistry” standards and ii) to explore the effect that different parameters have on the products. In optimizing the synthesis protocol, short reaction times and low temperatures (below 150 °C) were considered. Yb³⁺ and Er³⁺ ions were chosen as dopants for the NaYF₄ material. Within the context of the second goal, parameters including nature of the precursors, treatment temperature, and treatment time were investigated to afford a pure hexagonal crystalline phase, both in the doped and undoped materials. To fully explore the synthesis results, the prepared materials were characterized from a structural (XRD), compositional (XPS, ICP-MS), and morphological (SEM) point of view. The upconverting properties of the compounds were confirmed by photoluminescence measurements.     

An Intrinsic Photothermal Liquid for Light Detection and Energy Storage

Photothermal materials (PTMs) have been intensively investigated in the fields of photothermal conversion. Superior to solid PTMs, liquid PTMs are leading the trends in satisfying the demands of high flexibility and easy recycling. Successful examples of liquid PTMs are mostly formulated by dispersing solid PTMs in solvents, but suffer from the problems of phase segregation and solvent pollution. In this work, a low-cost formulation is proposed, which involves an oxidative product of ethyl oleate by iodine. It is an intrinsic liquid PTM, preserving the fluidic nature as well as possessing considerable ability for photothermal conversion. In addition to understanding the mechanism of light absorption in the visible and even near infrared windows, two examples are presented to demonstrate the great potential of liquid PTMs in broad areas such as light sensing and energy storage.     

Nitrogen Doping and Carbon Coating Affects Substrate Selectivity of TiO2 Photocatalytic Organic Pollutant Degradation

A series of carbon-coated, nitrogen-doped titanium dioxide photocatalysts was produced and characterized. N-doped TiO₂ powder samples were prepared using a sol-gel method and subsequently used for making doped-TiO₂ thin films on glass substrates. Carbon layers were coated on the films by a thermal decomposition method using catechol. Diffuse reflectance spectra and Mott-Schottky analyses of the samples proved that nitrogen doping and carbon coating can slightly lower the band gap of TiO₂, broaden its absorption to visible light and enhance its n-type character. According to photocatalytic tests against model contaminants, carbon-coated nitrogen-doped TiO₂ films have better performance than simple TiO₂ on the degradation of Rhodamine B dye molecules, but are poorly effective for degrading 4-chlorophenol molecules. Several possible explanations are proposed for this result, supported by scavenging experiments. This reveals the importance of a broad substrate scope when assessing new photocatalytic materials for water treatment, something which is often overlooked in many literature studies.     

Solution-Based,Anion-Doping of Li4Ti5O12 Nanoflowers for Lithium-Ion Battery Applications

Solution-based, anionic doping represents a convenient strategy with which to improve upon the conductivity of candidate anode materials such as Li₄Ti₅O₁₂ (LTO). As such, novel synthetic hydrothermally-inspired protocols have primarily been devised herein, aimed at the large-scale production of unique halogen-doped, micron-scale, three-dimensional, hierarchical LTO flower-like motifs. Although fluorine (F) doping has been explored, the use of chlorine (Cl) dopants is the primary focus here. Several experimental variables, such as dopant amount, lithium hydroxide concentration, and titanium butoxide purity, were probed and perfected. Furthermore, the Cl doping process did not damage the intrinsic LTO morphology. The analysis, based on interpreting a compilation of SEM, XRD, XPS, and TEM-EDS results, was used to determine an optimized dopant concentration of Cl. Electrochemical tests demonstrated an increased capacity via cycling of 12 % for a Cl-doped sample as compared with pristine LTO. Moreover, the Cl-doped LTO sample described in this study exhibited the highest discharge capacity yet reported at an observed rate of 2C for this material at 143mAh g⁻¹. Overall, these data suggest that the Cl dopant likely enhances not only the ion transport capabilities, but also the overall electrical conductivity of our as-prepared structures. To help explain these favorable findings, theoretical DFT calculations were used to postulate that the electronic conductivity and Li diffusion were likely improved by the presence of increased Ti³⁺ ion concentration coupled with widening of the Li migration channel.