Tailoring the morphology and properties of waterborne polyurethanes by the procedure of cellulose nanocrystal incorporation

Polyurethane waterborne synthesis was performed using a two-step method, commonly referred to as a prepolymer method. Nanocomposites based on waterborne polyurethane and cellulose nanocrystals were prepared by the prepolymer method by altering the mode and step in which the nanofillers were incorporated during the polyurethane formation. The morphology, structural, thermal, and mechanical properties of the resulting nanocomposite films were evaluated by Fourier transform infrared spectroscopy (FTIR), small angle X-ray scattering (SAXS), scanning electron microscopy (SEM), and tensile tests. FTIR results indicated that the degree of interaction between the nanofillers and the WPU through hydrogen bonds could be controlled by the method of cellulose nanocrystal incorporation. Data obtained from SAXS experiments showed that the cellulose nanocrystals as well as the step of the reaction in which they are added influenced the morphology of the polyurethane. The reinforcing effect of CNCs on the nanocomposites depends on their morphology.     

Thermo-mechanical behavior of electrospun thermoplastic polyurethane nanofibers

Analysis of the thermo-mechanical behavior of electrospun thermoplastic polyurethane (TPU) block co-polymer nanofibers (glass transition temperature ∼−50 °C) is presented. Upon heating, nanofibers began to massively contract, at ∼70 °C, whereas TPU cast films started to expand. Radial wide-angle X-ray scattering (WAXS) profiles of the nanofibers and the films showed no diffraction peaks related to crystals, whereas their amorphous halo had an asymmetric shape, which can be approximated by two components, associated with hard and soft segments. During heating, noticeable changes in the contribution of these components were only observed in nanofibers. These changes, which were accompanied with an endothermic DSC peak, coinciding with the start of the nanofibers contraction, can be attributed to relaxation of an oriented stretched amorphous phase created during electrospinning. Such structure relaxation becomes possible when a portion of the hard segment clusters, forming an effective physical network, is destroyed upon heating.     

Synthesis,Crystal Structures,and in Silico Toxicity Prediction of Thienopyridine Phosphoramidates

New thieno[2,3-b]pyridine phosphoramidates compounds were synthesized and characterized by infrared; ¹H, ¹³C, and ³¹P NMR spectroscopy; and high-resolution mass spectrometry. The products were obtained in good yields (64–82%) under mild conditions by nucleophilic aromatic substitution reaction of aminoalkylphosphoramidates over 4-chlorothieno[2,3-b]pyridine-5-carbonitrile. The crystal structures of two compounds were solved by x-ray diffraction and showed a network of intermolecular interactions involving phosphoramidate groups. Druglike properties and toxicity of the new compounds were studied with the help of the software Molinspiration, Osiris, and Toxtree, and were compared with the standard drugs amphotericin B, miltefosine, benznidazole, and nifurtimox.

[Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications® for the following free supplemental resource(s): Full experimental and spectral details.]     

DFT study of the physicochemical characteristics and spectral behavior of new 8‐substituted 1,3,7‐trimethylxanthines

Nine biologically active theophylline derivatives were investigated using quantum chemical methods (density functional theory level). All calculations were performed at B3LYP/6‐31G** level of theory. The electrostatic potential charges, highest occupied molecular orbital (HOMO)/lowest unoccupied molecular orbital (LUMO) gap, dipole moment, vibration frequencies, and electronic spectra were calculated. Log P was determined by Ghose‐Crippen method. All of the compounds under study are polar and negatively charged, which is necessary for their interaction with the receptors/enzymes. Majority of the compounds are lipophilic and they can easily diffuse through the cell membrane. The observed differences between the calculated and the experimental vibration frequencies in the Fourier Transform Infrared Spectroscopy (FTIR) spectra are established to be mainly in NH and OH bands, due to hydrogen bonds formation. The discrepancies between theoretical and experimental electronic spectra may be due to vibration effects and H‐bonding with the solvent molecules. The obtained results show that this type of spectrum is formed mainly by the xanthine fragment of the molecule, especially in the fingerprint region. All calculated properties could be useful for future qualitative‐structure activity relationship (QSAR) analysis. © 2012 Wiley Periodicals, Inc.     

Synthesis,spectral, electrochemical properties,and photovoltaic performance of structurally constrained BODIPY dyes with 4,4-dimethyltriphenylamine at the 2,6-positions

Novel symmetrical D–A–D type of BODIPY derivatives (DTPA–BDP) were synthesized successfully. The introduction of chromophoric units makes the molecule absorption wavelengths spanning the ranges of 300–800 nm and shifts the emission to 793 nm in red and near-infrared region. Bulk heterojunction solar cells with DTPA–BDPs as electron donor and PC₆₁BM as electron acceptor exhibited photovoltaic properties with a power conversion efficiency of 0.77%, an open-circuit voltage of 0.70 V.     

Synthesis of β,β′-edge fused, π-extended porphyrins and their applications in the dye-sensitized solar cells

Four π-extended, β,β′ aromatic ring fused porphyrins including mono- and opp-dibenzoporphyrins bearing two carboxyl groups at only one fused benzo group were synthesized. The optical results by UV–vis spectroscopy indicate that when compared with the absorption spectra of monobenzoporphyrins, greater light-harvesting capabilities can be realized for opp-dibenzoporphyrins with two benzo group at the opposite β,β′ positions of the porphyrin. The photovoltaic properties of these π-extended porphyrins were examined for the first time and the highest conversion efficiency of 1.62% was realized for opp-dibenzoporphyrin 8a-sensitized solar cell, which is ∼60% higher than that of monobenzoporphyrin 4a based solar cell indicating the effect of an extra aromatic π conjugation on the light-harvesting capabilities of π-extended porphyrins. Subsequent DFT calculation results supported our results obtained in the optical and photovoltaic studies.     

Syntheses,Structures, and Properties of Two New Tri‐spin Lanthanide‐Nitronyl Nitroxide (LnIII = GdIII and HoIII) Complexes

Abstract. Two radical–Ln^III–radical complexes, [Ln(hfac)₃(NITPh‐Ph)₂] [Ln = Gd ( 1 ) and Ho ( 2 ), hfac = hexafluoroacetylacetonate; and NITPh‐Ph = 4′‐biphenyl‐4, 4, 5, 5‐tetramethylimidazoline‐1‐oxyl‐3‐oxide] were synthesized and characterized by X‐ray diffraction, elemental analysis, magnetic measurements, as well as IR and UV/Vis spectroscopy. X‐ray crystal structure analysis revealed that the structures of both complexes are isomorphous, the central Ln^III ions are coordinated by six oxygen atoms from three hfac ligand molecules and two oxygen atoms from nitronyl radicals. The temperature dependencies of the magnetic susceptibilities were studied. They showed that in the Gd^III complex, ferromagnetic interactions between Gd^III and the radicals and antiferromagnetic interactions between the radicals coexist in this system (with J_Rad–Gd = 0.1 cm^–1, J_Rad–Rad = –0.309 cm^–1).     

Preparation,Crystal Structure,and Thermal Decomposition of the Intriguing Five‐coordinated Compound [Cu(IMI)4Cl]Cl (IMI = Imidazole)

The intriguing multi‐ligand compound [Cu(IMI)₄Cl]Cl ( 1 ) with the ligand imidazole (IMI) was synthesized and characterized by elemental analysis and FT‐IR spectroscopy. The crystal structure was determined by X‐ray single crystal diffraction and the crystallographic data showed that the compound belongs to the monoclinic P2₁/n space group [α = 8.847(2) Å, b = 13.210(3) Å, c = 13.870(3) Å, and β = 90.164(3)°]. Furthermore, the Cu^II ion is five‐coordinated by four nitrogen atoms from four imidazole ligands and a chlorine atom. The thermal decomposition mechanism was determined based on differential scanning calorimetry (DSC) and thermogravimetric (TG‐DTG) analysis. The non‐isothermal kinetics parameters were calculated by the Kissinger's method and Ozawa's method, respectively. The energy of combustion, enthalpy of formation, critical temperature of thermal explosion, entropy of activation (ΔS^≠), enthalpy of activation (ΔH^≠), and free energy of activation (ΔG^≠) were measured and calculated.     

Synthesis,Structures, Luminescent and Magnetic Properties of Heterometallic 5p‐4f Compounds with Ethylenediaminetetra­acetate

A series of heterometallic Ln^III–Sb^III edta‐containing compounds with the formulas [Sb₂(edta)₂Ln]NO₃ · nH₂O [edta = ethylenediaminetetraacetate; Ln = Eu, n = 7 ( 1 ); Gd, n = 7.5 ( 2 ) and Tb, n = 8 ( 3 )] were synthesized and characterized by elemental analyses (EA), powder X‐ray diffraction (PXDP), Fourier transform infrared spectroscopy (FT‐IR), and thermogravimetric analyses (TGA). Their fluorescence and magnetic properties were also studied. The thermal analysis demonstrates the compounds formation of the antimony, lanthanide ions, and edta^4– ligands. FT‐IR spectra reveal that the antimony and lanthanide ions are connected through the carboxylate bridges. The studies of luminescence properties show that compounds 1 and 3 exhibit typical luminescence in the visible region. Furthermore, magnetic properties reveal compounds 2 and 3 have weak ferromagnetic behavior.