Heavy Metals in Acrylic Color Paints Intended for the School Children Use: A Potential Threat to the Children of Early Age

Heavy metals are the harmful elements, regarded as carcinogens. Nevertheless, owing to their physical and chemical properties, they are still used in the production of several commercial products. Utilization of such products increases the chance for the exposure of heavy metals, some of them are categorized as probable human carcinogens (Group 1) by the International Agency for Research on Cancer. Exposure of heavy metals to school children at early age can result severe life time health issues and high chance of emerging cancer. Thus, we have performed study relating to the presence of heavy metals in acrylic color paints commonly used by the school children. Acrylic paints of different colors were assayed for seven potential heavy metals manganese (Mn), cobalt (Co), nickel (Ni), zinc (Zn), arsenic (As), cadmium (Cd) and lead (Pb) using microwave digestion and iCAPQ inductively coupled plasma mass spectrometry (ICP-MS) system. The optimized method including paints digestion reagents nitric acid (HNO₃, 65%, 5 mL) and hydrofluoric acid (HF, 40%, 2 mL) have offered excellent method performance with recovery values ranged between 99.33% and 105.67%. The elements were identified in all of the analyzed samples with concentrations ranged from 0.05 to 372.59 µg/g. Cd constitutes the lower percentage (0.05%), whereas Zn constitutes high ratio contribution which was tremendously high (68.33%). Besides, the paints contamination was also color specific, with considerably total heavy metal concentrations found in brunt umber (526.57 µg/g) while scarlet color (12.62 µg/g) contained lower amounts. The outcomes of our investigation highlight the necessity for guidelines addressing the heavy metals in acrylic color paints intended for the school children usage.     

Removal of Cd(II), Cu(II), and Pb(II) by adsorption onto natural clay: a kinetic and thermodynamic study

In this work, we study the elimination of three bivalent metal ions (Cd²⁺, Cu²⁺, and Pb²⁺) by adsorption onto natural illitic clay (AM) collected from Marrakech region in Morocco. The characterization of the adsorbent was carried out by X-ray fluorescence, Fourier transform infrared spectroscopy and X-ray diffraction. The influence of physicochemical parameters on the clay adsorption capacity for ions Cd²⁺, Cu²⁺, and Pb²⁺, namely the adsorbent dose, the contact time, the initial pH imposed on the aqueous solution, the initial concentration of the metal solution and the temperature, was studied. The adsorption process is evaluated by different kinetic models such as the pseudo-first-order, pseudo-second-order, and Elovich. The adsorption mechanism was determined by the use of adsorption isotherms such as Langmuir, Freundlich, and Temkin models. Experiments have shown that heavy metals adsorption kinetics onto clay follows the same order, the pseudo-second order. The isotherms of adsorption of metal cations by AM clay are satisfactorily described by the Langmuir model and the maximum adsorption capacities obtained from the natural clay, using the Langmuir isotherm model equation, are 5.25, 13.41, and 15.90 mg/g, respectively for Cd(II), Cu(II), and Pb(II) ions. Adsorption of heavy metals on clay is a spontaneous and endothermic process characterized by a disorder of the medium. The values of ΔH are greater than 40 kJ/mol, which means that the interactions between clay and heavy metals are chemical in nature.     

Facial Synthesis of Adsorbent from Hemicelluloses for Cr(VI) Adsorption

It is challenging work to develop a low-cost, efficient, and environmentally friendly Cr(VI) adsorbent for waste water treatment. In this paper, we used hemicelluloses from chemical fiber factory waste as the raw material, and prepared two kinds of carbon materials by the green hydrothermal method as adsorbent for Cr(VI). The results showed that hemicelluloses hydrothermally treated with citric acid (HTC) presented spherical shapes, and hemicelluloses hydrothermally treated with ammonia solution (HTC-NH₂) provided spongy structures. The adsorption capacity of the samples can be obtained by the Langmuir model, and the adsorption kinetics could be described by the pseudo-second-order model at pH 1.0. The maximum adsorption capacity of HTC-NH₂ in the Langmuir model is 74.60 mg/g, much higher than that of HTC (61.25 mg/g). The green hydrothermal treatment of biomass with ammonia solution will provide a simple and feasible way to prepare adsorbent for Cr(VI) in waste water treatment.     

反对称分子动力学模型中的冻结概念（英文）

给出了反对称分子动力学模型(AMD)计算的50 Me V/nucleon112Sn+112Sn反应的分析结果。该研究是反对称分子动力学模型中统计冻结概念的部分研究结果。利用自洽法结合修正的Fisher模型,提取了发射源的温度和密度分别为T=(6.1±0.2)Me V,ρ/ρ0=0.69±0.03。通过与AMD模型计算的系统在时间演化过程中的最大密度比较,得出碎片发射源的密度远小于系统的最大密度。利用自洽法提取的温度和密度与35 Me V/nucleon的40Ca+40Ca反应系统及40 Me V/nucleon的64Zn+112Sn反应系统所提取的温度和密度非常接近。该结果表明反对称分子动力学模型中,系统在中等质量碎片形成时刻处于统计冻结体积。     

核酸适配体在重金属检测中的应用研究

随着工业化生产的快速发展,由重金属离子带来的环境污染也越来越引起了人们的高度重视.科研人员通过不同的检测方法对重金属离子进行检测.由于核酸适配体对重金属离子的选择性较高,使得其在重金属检测中的应用越来越广.     

中温热解焦油重馏分悬浮床加氢裂化的研究

以中温热解煤焦油为原料,对其性质进行了分析,其中,350℃重质馏分中胶质含量30.88%,沥青质含量37.27%,四氢呋喃不溶物3.36%,属于常规固定床加氢裂化难以直接处理的馏分。合成了一种Mo系超分散催化剂,采用FT-IR、XPS、XRD、SEM和TEM等对催化剂进行了表征,催化剂中含有Mo=O和Mo-S特征结构,活性金属的硫化率为84.34%,在体系中具有优良的分散性,在反应体系内原位分解为超分散MoS_2颗粒;在0.25 t/d连续装置上进行了热解重油悬浮床加氢裂化实验研究,考察了反应条件对产物分布情况和结焦率的影响,得出适宜的反应条件为19 MPa,440℃,催化剂的添加量为300 mg/kg;此条件下石脑油收率24.47%,柴油馏分收率49.71%,结焦率1.32%。     

一种便携快速测量水中铅和镉含量的仪器-ANDalyze

快速测量污染水中重金属元素含量对于监测野外突发污染至关重要.建立了使用以生物酶（DNA酶）为原理的便捷仪器快速测定污染水中铅（Pb）和镉（Cd）元素含量的方法.使用生物酶传感器对标准溶液进行测量,根据溶液推荐和测量浓度之间的线性关系对仪器进行校准后,可测量的质量浓度范围:Pb为2~100 μg/L,Cd为0.1~1.0 mg/L.仪器可以在3~5 min内方便快速完成重金属的现场测量,使用DNA酶可以快速获得污染水中的微量金属元素含量,有利于野外重金属污染的即时测量.     

Mussel‐inspired method to decorate commercial nanofiltration membrane for heavy metal ions removal

Nanofiltration (NF) membranes have been widely used for the treatment of electroplating, aerospace, textile, pharmaceutical, and other chemical industries. In this work, halloysite nanotubes (HNTs) were directly anchored on the surface of commercial nanofiltration (NF) membrane by dopamine modification following advantageous bio‐inspired methods. SEM and AFM images were used to characterize the HNTs decorated membrane surface in terms of surface morphology and roughness. Water contact angle (WCA) was employed in evidencing the incorporation of HNTs and dopamine in terms of hydrophilicity or hydrophobicity. Augmentation of HNTs was found to obviously enhance the hydrophilicity and surface roughness resulting in improved water permeability of membrane. More importantly, the rejection ratios of membrane also increased during the removal of heavy metal ions from wastewater. The permeability and Cu²⁺ rejection ratio of modified NF membrane were as high as 13.9 L·m^?2·h^?1·bar^?1 and 74.3%, respectively. Incorporation of HNTs was also found to enhance the anti‐fouling property and stability of membrane as evident from long‐term performance tests. The relative concentration of HNTs and dopamine on membrane surface was optimized by investigating the trade‐off between water permeability and rejection ratio.     

Ligandless,deep eutectic solvent‐based ultrasound‐assisted dispersive liquid‐liquid microextraction with solidification of the aqueous phase for preconcentration of lead,cadmium, cobalt and nickel in water samples

A green and efficient sample preparation method using a deep eutectic solvent‐based ultrasounds‐assisted dispersive liquid–liquid microextraction with solidification of the aqueous phase followed by high performance liquid chromatography analysis was developed for preconcentration and determination of heavy metals in environmental samples. In the proposed method, a novel, low density deep eutectic solvent was prepared by mixing trihexyl(tetradecyl)phosphonium chloride and thiosalicylic acid at a molar ratio of 1:2 and used both as an extractant and complexing agent. Ultrasound was used to disperse the extractant in the aqueous phase of the sample. Then, the phases were separated by centrifugation, after which the aqueous phase was frozen and the surface extractant phase was dissolved in a small volume of acetonitrile and subjected to liquid chromatographic analysis. The proposed method provided precisions (relative standard deviation, n = 5) in the range of 2.6–4.7%. The limit of detection were 0.05, 0.13, 0.06, and 0.11 µg/L for Pb(II), Cd(II), Co(II), Ni(II), respectively. The enhancement factors were equal to 154, 159, 162, and 158 for lead(II), cadmium(II), cobalt(II), and nickel(II), respectively. The accuracy of the proposed method was evaluated using certified reference materials (CA011b – hard drinking water, NIST 1643e – trace elements in water, TMRAIN‐04 – simulated rain sample).