方差可能无穷的“中度偏离”单位根过程的复合分位数估计

考虑一类"中度偏离"单位根过程,y_t=q_ny_t-1+u_t,其中qn=1+c/(k_n),k_n=o(n),c为一非零常数,{u_t}为随机扰动项序列.在允许扰动项方差无穷的条件下,构造q_n的复合分位数估计,并得到了该估计的渐近分布.最后通过数值模拟,在扰动项服从t(2)分布下,说明了该估计的稳健和有效性.     

Thermomagnetic properties of very heavy fermions suitable for adiabatic demagnetisation refrigeration at low temperature

ABSTRACT

With the aim to improve the performance of classical paramagnetic salts for adiabatic refrigeration processes at the sub-Kelvin range, relevant thermodynamic parameters of some new Yb-based intermetallic compounds are analysed and compared. Two main applications are considered: (i) those requiring temperature fixed-points to be reached applying magnetic fields of moderate intensity for satellite applications, and (ii) those which can be used for controlled thermal drifts in laboratory applications. Different thermomagnetic trajectories of the entropy are identified depending on respective specific heat behaviours and the constraints imposed by the Nernst postulate at the sub-Kelvin range. Some simple relationships are proposed to compare the diverse magnetocaloric characteristics of different systems. This procedure allows to include the classical Cerium-Magnesium-Nitride (CMN) salt in that comparison.     

Synthesis and Structural Characterization of Butadienylcalcium-based Heavy Grignard Reagents and a Ca4[O] Inverse Crown Ether Complex

The structure elucidation of heavy Grignard reagents (RAeX, Ae=Ca, Sr, and Ba, X=halides) has been greatly strived after, mainly because of their inaccessibility and remarkable instability. The synthesis of a series of butadienylcalcium compounds is presented, including 1-calcio-4-lithio-1,3-butadiene, 1,4-dicalcio-1,3-butadiene, and a Ca₄[O] inverse crown ether complex, via the reaction between 1,4-dilithio-1,3-butadienes and calcium iodide in THF. Single-crystal X-ray analysis of these unprecedented heavy Grignard reagents revealed unique structural characteristics and bonding modes. Preliminary reaction chemistry was investigated. This study provides a novel class of alkenyl heavy Grignard reagents and a useful synthetic strategy for otherwise unavailable reactive organometallic compounds.     

Projectile fragment emission in the fragmentation of 56Fe on C,Al and CH2 targets at 471 A MeV

The emission angle and the transverse momentum distributions of projectile fragments produced in the fragmentation of 56Fe on CHs, C and A1 targets at 471 A MeV are measured. It is found that for the same target, the average value and width of the angular distribution decrease with an increase of the projectile fragment charge; for the same projectile fragment, the average value of the distribution increases and the width of the distribution decreases with increasing the target charge number. The transverse momentum distribution of a projectile fragment can be explained by a single Gaussian distribution and the averaged transverse momentum per nucleon decreases with the increase of the charge of projectile fragment. The cumulated squared transverse momentum distribution of a projectile fragment can be explained well by a single Rayleigh distribution. The temperature parameter of the emission source of the projectile fragment, calculated from the cumulated squared transverse momentum distribution, decreases with the increase of the size of the projectile fragment.     

Die Untersuchung einer Laboratoriumsanlage nach dem Heiß-Kalt-System mit einfachem Durchfluß der Fluide

Es wird ein Heiβ-Kalt-System mit einfachem Durchfluβ der Fluide untersucht. Dabei wird gezeigt, daβ zwischen den Isotopenkonzentrationen des Gases und der Flüssigkeit lineare Beziehungen bestehen. Eine Möglichkeit zur experimentellen Bestimmung der realen Werte der Parameter der Kolonne wird angegeben.     

基于油藏实际的稠油层内水热催化裂解机理研究

开展了稠油层内水热催化裂解技术在胜利油田的先导实验,五口井平均周期单井增油653 t,稠油初期降黏率达79.8%,措施14周后降黏率仍大于62%。利用Brookfield DV-Ⅲ黏度计、ElementarVario EL III元素分析仪、Knauer K-700蒸气压渗透仪、Agilent 6890N气相色谱仪和EQUINOX 55傅里叶变换红外光谱仪等,对措施前后稠油的物化性质进行分析。结果表明,层内水热催化裂解后稠油黏度及平均分子量减小、轻烃含量增加、重质组分含量减少、氢碳原子比增加、杂原子含量减小。稠油层内裂解反应受催化剂体系、高温水及储层矿物因素控制,催化剂是促进稠油裂解的主要因素,供氢剂及分散剂等助剂有助于提高裂解效果,高温水的酸碱性质及储层矿物对稠油具有催化裂解作用。多因素协同作用下使稠油发生脱侧链、分子链异构、断链、加氢、开环、成环、脱硫等系列反应,使得稠油大分子分解成小分子物质,降低了稠油黏度,改善了稠油品质,证实该技术在现场应用中具有可行性。     

Medium modified fragmentation function: equivalence of the ACSX and QW formalisms in the high-Q2 region

We study the medium modified fragmentation function in high-energy heavy-ion collisions. We show that the ACSX and QW formalisms are equivalent to each other in the high-Q² limit in both theoretical and numerical aspects.     

pH-Responsive Nanocomposites From Methylcellulose and Attapulgite Nanorods: Synthesis,Swelling and Absorption Performance on Heavy Metal Ions

A pH-responsive methylcellulose-g-poly(sodium acrylate)/attapulgite (MC-g-PNaA/APT) nanocomposite superabsorbent was prepared by the free-radical solution polymerization of methylcellulose (MC), sodium acrylate (NaA) and nanoscale attapulgite (APT) in the presence of the crosslinker N,N′-methylene-bis-acrylamide (MBA). The structure and morphology of the nanocomposite were characterized by FTIR, FESEM, TEM, XRD and EDS techniques, and the effects of the amount of MBA, MC and APT nanorods on swelling behaviors were also evaluated. Results indicate that NaA has been grafted onto MC macromolecular chains and APT nanorods participated in polymerization by its active silanol groups, and APT led to a better dispersion in the MC-g-PNaA matrix. The incorporation of APT clearly enhanced the swelling capacity and rate of the superabsorbent. In addition, the nanocomposite exhibited excellent absorption capacity on heavy metal ions, and its absorption amounts on Ni²⁺, Cu²⁺ and Zn²⁺ ions reached 9.86, 7.66 and 21.86 times greater than active carbon (AC). The biopolymer-based nanocomposite superabsorbents can be used as a potential water-saving material and candidate of AC for heavy metal ion absorption.     

Preparation of Iminoacetic Acid-type Composite Chelating Material IAA-PEI/SiO2 and Preliminary Studies on Chelating Adsorption Property towards Heavy Metal Ions

Polyamine polyethyleneimine (PEI) was first grafted on the surfaces of micro-sized silica gel particles in the manner of the coupling graft (the manner of “grafting to”), forming the grafting particles PEI/SiO₂. Subsequently, via a polymer reaction, the nucleophilic substitution reaction between the primary and secondary amino groups of the grafted PEI macromolecule and chloroactic acid (CAA), iminoacetic acid groups were bonded onto the grafted PEI chains, and an iminoacetic acid (IAA)-type composite chelating material, IAA-PEI/SiO₂, was formed. In this work, the preparation process of IAA-PEI/SiO₂ particles was mainly researched, and the effects of the main factors on the polymer reaction, i.e., the nucleophilic substitution reaction, were examined emphatically. The adsorption behavior of IAA-PEI/SiO₂ particles towards several kinds of heavy metal ions was preliminarily evaluated. The experiments results show that it is feasible to introduce IAA groups onto PEI/SiO₂ particles via the substitution reaction between CAA and the amino groups of the grafted PEI. The reaction rate is affected greatly by the feed ratio of the amino group of PEI to CAA, so the substitution reaction between CAA and the amino groups of the grafted PEI is a bimolecular nucleophilic substitution reaction (S_N2). The reaction temperature and the used amount of acid-acceptor NaHCO₃ affect the bonding rate of IAA groups greatly. The fitting temperature was 60°C, and 1:1 of the molar ratio of NaHCO₃ to CAA was an appropriate amount of acid-acceptor NaHCO₃. Under the above optimal reaction conditions and with 3:1 molar ratio of amino group of PEI to CAA, 72% of the IAA group bonding rate (it is based on the hydrogen atoms in the primary and secondary amino groups of the grafted PEI) in 8 h can be reached. The composite chelating material IAA-PEI/SiO₂ possesses a strong chelating adsorption ability for heavy metal ions because of the increase of the ligands and formation of stable five-membered chelate rings.     

Heavy Metal Removal from Synthetic Solutions with Magnetic Beads Under Magnetic Field

The aim of this study is to prepare magnetic beads which can be used for the removal of heavy metal ions from synthetic solutions. Magnetic poly(ethylene glycol dimethacrylate‐vinyl imidazole) [m‐poly(EGDMA‐VIM)] beads were produced by suspension polymerization in the presence of magnetite Fe₃O₄ nano‐powder. The specific surface area of the m‐poly(EGDMA‐VIM) beads was found to be 63.1 m²/g with a size range of 150–200 µm in diameter and the swelling ratio was 85%. The average Fe₃O₄ content of the resulting m‐poly(EGDMA‐VIM) beads was 12.4%. The maximum binding capacities of the m‐poly(EGDMA‐VIM) beads were 32.4 mg/g for Cu²⁺, 45.8 mg/g for Zn²⁺, 84.2 mg/g for Cd²⁺and 134.5 mg/g for Pb²⁺. The affinity order on mass basis is Pb²⁺>Cd²⁺>Zn²⁺>Cu²⁺. Equilibrium data agreed well with the Langmuir model. pH significantly affected the binding capacity of the magnetic beads. Binding of heavy metal ions from synthetic wastewater was also studied. The binding capacities were 26.2 mg/g for Cu²⁺, 33.7 mg/g for Zn²⁺, 54.7 mg/g for Cd²⁺ and 108.4 mg/g for Pb²⁺. The magnetic beads could be regenerated up to about 97% by treating with 0.1 M HNO₃. These features make m‐poly(EGDMA‐VIM) beads a potential candidate for support of heavy metal removal under magnetic field.