Selective Solid Phase Extraction and Pre-Concentration of Heavy Metals from Seawater by Physically and Chemically Immobilized 4-Amino-3-Hydroxy-2-(2-Chlorobenzene)-Azo-1-Naphthalene Sulfonic Acid Silica Gel

4-Amino-3-hydroxy-2-(2-chlorobenzene)-azo-1-naphthalene sulfonic acid (AHCANSA) was used as a chelating modifier to improve the reactivity of the silica gel surface in terms of selective binding and extraction of heavy metal ions. The surface coverage values were found to be 0.488 and 0.473mmolg^–1 for the newly modified physically adsorbed silica gel phase (I) and chemically immobilized-AHCANSA phase (II), respectively. The modified silica gel phases (I, II) were tested for stability in different acidic buffer solutions (pH 1–6) and found to be highly resistant to hydrolysis and leaching by buffer solutions above pH 2. The application of these two phases as solid extractors for a series of mono-, di-, and tri-valent metal ions from aqueous solutions was also performed with different controlling factors such as the pH value of metal ion solutions and equilibrium shaking time. The mmolg^–1 metal capacity values determined by silica gel phases (I, II) were found to confirm high affinity and selectivity characters for binding with heavy metal ions such as Cr³⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺ and Pb²⁺ in a range of 0.250–0.483. The tested alkali and alkaline earth metals, Na⁺, K⁺, Mg²⁺ and Ca²⁺, were found to exhibit little interaction and binding ability with the modified silica gel phases. The selectivity characters incorporated into the modified silica gel phases were further utilized and applied in solid phase extraction and pre-concentration of trace concentration levels (1.0µgmL^–1 and 2.00–2.50ngmL^–1) from real seawater samples. The percentage recovery values determined for Cr³⁺, Cu²⁺, Zn²⁺, Cd²⁺ and Pb²⁺ were found to be in the range of 95.2–98.1±2.0–5.0%, and the pre-concentration recovery values for the same tested heavy metal ions were found to be in the range of 92.5–97.1±3.0–6.0% for the two newly modified silica gel phases with a pre-concentration factor of 500.Received December 20, 2002; accepted May 14, 2003 published online September 1, 2003     

Stimultaneous quantitative analysis using dual capillary columns of different polarities

Complex organic mixtures, such as coal liquefaction and oil shale products and by-products, are comprised of hundreds or thousands of individual components. State-of-the-art high resolution gas chromatography does not always provide sufficient resolution to allow accurate quantitation or identification of many compounds of interest. The concept of dual capillary column chromatography combines the different resolving characteristics of two capillary columns coated with different stationary phases into a single chromatographic run. In this approach, both columns are connected to the same injection port. Analysis of complex mixtures in this fashion can confirm the identification and quantitation of components on two columns of different polarity with little increased analysis time, can provide a means of obtaining quantitative data for individual components which are known to coelute on any one column, and can alert one to unknown coelution problems that would be undetected by gas chromatographic analysis on a single capillary column. Simultaneous dual column analysis was applied to three samples, the neutral polycyclic aromatic hydrocarbon (PAH) fraction of a Solvent Refined Coal-II (SRC-II) heavy distillate, the nitrogen-containing polycyclic aromatic compound (N-PAC) fraction of an SRC-II heavy distillate, and the basic fraction from a shale oil process water. Fused silica capillary columns coated with SE-54 and Durawax 3 were used for the analyses of the heavy distillate, while SE-54 an Carbowax 20M capillary columns were used for the analysis of the process water.     

Systematic high-pressure synthesis of new filled skutterudites with heavy lanthanide, LnFe4P12 (Ln=heavy lanthanide, including Y)

New filled skutterudites with heavy lanthanide, LnFe₄P₁₂ (Ln=Tb, Dy, Ho, Er, Tm, Yb, Lu and Y) have systematically been prepared for the first time by the high-pressure technique. The relationship between lattice constants and atomic numbers of lanthanide (including Y) is established for LnFe₄P₁₂. Electrical and magnetic properties of several new filled skutterudites with heavy lanthanide have been studied at low temperatures; YFe₄P₁₂ shows a superconducting transition at around 7 K, and DyFe₄P₁₂ behaves as a ferromagnet below 10 K. Electrical and magnetic anomalies in DyFe₄P₁₂ and YFe₄P₁₂ are mainly discussed.     

蒙脱土表面键合配位体固相萃取填料的制备及其对重金属离子的吸附性能

通过酸洗、硅烷偶联剂表面活化、键合苯甲酰异硫氰酸酯对蒙脱土进行改性,制得新型固相萃取(SPE)材料。 采用红外光谱、扫描电子显微镜、X射线光电子能谱表征了改性蒙脱土的结构和形貌。 考察了制备的SPE填料对水中As³⁺、Bi³⁺、Cu²⁺、Sb³⁺、Sn²⁺和Pb²⁺的吸附性能,确定了最佳固相萃取条件,对6种金属离子吸附容量分别为10.83、11.92、12.67、10.43、10.01及10.54 mg/g。 通过SPE与电感耦合等离子体质谱联用测定了样品中As³⁺、Bi³⁺、Cu²⁺、Sb³⁺、Sn²⁺和Pb²⁺ 6种重金属离子的含量,检出限分别为0.024、0.013、0.075、0.037、0.011和0.064 μg/L。     

Density functional calculations of large systems containing heavy elements by means of the regionalization algorithm

The compounds containing transition metals orother heavy elements play important roles in chemistry.They possess diverse properties which have been util-ized in numerous functional materials. Some of theseproperties are also involved in biological processes.However, it is very difficult to study these compoundsdeeply by means of quantum chemical methods, be-cause in these systems usually there are a large amountof electrons, the distribution of the frontier orbitals isdense, the correlation be…     

Synthesis of thiol chelating resins and their adsorption properties toward heavy metal ions

A series of chelating resins, derived from a macroreticular styrene-divinylbenzene (2%) copolymer beads grafted with various poly(ethylene glycols) HO? (? CH₂? CH₂? O? )_n? H(n = 0, 4, 9, 13) and containing thiol groups as chelating functions, have been synthesized in a three-step reaction sequence. The structure of the functionalized resins was confirmed by IR spectrophotometry, elemental analysis, and differential scanning calorimetry. The complexation behavior of these thiol resins was investigated towards Hg(II), Cu(II), and Pb(II) ions in aqueous solution by a batch equilibration technique. The influence of pH on adsorption capacity was also examined. The adsorption values for metal ions' intake followed the order Hg(II) > Cu(II) > Pb(II). The affinity of these polymers towards Hg(II) ions was so high that the total mercury level in the liquid decreased from 20 ppm to below 10 ppb after 2 h of treatment. Polymers can be regenerated by washing with a solution of hydrochloric acid (6N) and 10% by weight of an aqueous solution of thiourea. © 1994 John Wiley & Sons, Inc.     

Chemical Characterization of Silage Effluents and their Influence on Soil Bound Heavy Metals

Abstract

Silage effluents, generated during silaging of various crops, are produced in high amounts in cattle breeding farms. Due to their acidity and high content of dissolved organic matter, they are causing disposal problems. On the other hand, their ability to mobilise soil bound trace elements (i.e. heavy metals) might be useful for the decontamination of polluted soils.

With an aim to perform metal leaching studies, silage effluents from various ensiled crops (maize, rape, grass, clover, sugar-beet leaves) were collected from Bavarian farms and analysed for their main inorganic and organic constituents. Important TOC sources (TOC concentrations from 13.9 to 53.6 gl^?1) are short chain aliphatic acids (concentrations between 235 and 638 mM·D1^?1; predominant compound: lactic acid), amino acids (ranging from 22.8 to 151 mM·D1^?1) and polypeptides (concentrations from 3.8 to 20.0 g·D1^?1).

The release of heavy metals from two adsorbents (bentonite and peat) and from a polluted soil under the influence of silage effluents was studied in batch tests. The leaching efficiencies for the soil bound metals increase following the order: sugar-beet leaves < clover < maize < rape < grass. The extraction rates obtained with grass silage juice are: Cd 74.7%, Zn 55.7%, Cu 53.5%, Ni 38.9%, Cr 12.7% and Pb 8.9%. After neutralisation the leaching rates dropped, with the exception of copper.     

Intensity‐based estimation of extreme loss event probability and value at risk

We develop a methodology for the estimation of extreme loss event probability and the value at risk, which takes into account both the magnitudes and the intensity of the extreme losses. Specifically, the extreme loss magnitudes are modeled with a generalized Pareto distribution, whereas their intensity is captured by an autoregressive conditional duration model, a type of self‐exciting point process. This allows for an explicit interaction between the magnitude of the past losses and the intensity of future extreme losses. The intensity is further used in the estimation of extreme loss event probability. The method is illustrated and backtested on 10 assets and compared with the established and baseline methods. The results show that our method outperforms the baseline methods, competes with an established method, and provides additional insight and interpretation into the prediction of extreme loss event probability. Copyright © 2012 John Wiley & Sons, Ltd.     

Nuklearpharmaka — Ihre Entwicklung,Präparation und Anwendungsmöglichkeiten

Radioaktiv markierte Präparate haben in denletzten Jahren in schnell zunehmendem Maße Eingang in die klinische Medizin gefunden. Sie sind beieiner Reihe von Indikationen schon jetzt außerordentlich wertvolle Hilfsmittel bei der Diagnose, besonders bei der Prüfung von Organfunktionen.     

Some Aspects of the Mobility and Distribution of Toxic Heavy Metal Contaminants Insoil Profiles and River Sediments

Abstract

Investigations of the distribution and mobility of Pb, Ni, Cd and Hg have shown that Pb is strongly associated with humic substances in the top layer of soils and in river sediments, and that Pb shows the highest organophilicity. Ni is very organophilic, and Cd, somewhat less so. The hydrophilicity of Hg highly influences its movement in soil profiles and river sediments. The risk of contamination by these metals is characterized through the environment protection capacity (EPC_G) values which combine humus content and the quality and thickness of the humus layer in one parameter. The risk of contamination is highest at low EPC_G values. Increase of EPC_G decreases the risk of environmental contamination through binding of heavy metals to humic substances, decreasing their mobility.