Operating characteristics and energy distribution in transferred plasma arc systems

A specially designed plasma chamber was constructed to study the operating characteristics of a dc plasma-transferred arc of argon, struck between a fluid convective cathode and a water-cooled anode. The arc voltage increased markedly with arc length and with an increase in the inlet velocity of the argon flow past the cathode tip, and much less with an increase in current. Radiation from the plasma column to the chamber walls and transfer of energy to the anode were the two principal modes of transfer of the arc energy. The former was dominant in the case of long arcs and at high inlet argon velocities. At the anode, the major contribution was from electron transfer, which occurred on a very small area of the anode (～5 mm in diameter). Convective heat transfer from the plasma was somewhat less. In all cases, the arc energy contributions to cathode cooling and to the exit gas enthalpy were small. From total heat flux and radiative heat transfer measurements, it was estimated that the plasma temperature just above the anode was in the range 10,000–12,000 K. Preliminary experiments with an anode consisting of molten copper showed that the arc root was no longer fixed but moved around continuously. The arc was othwewise quite stable, and its operating characteristics differed little from those reported for solid anodes, in spite of the greater extent of metal vaporization.     

Application of a chemical equilibrium model to thermodynamic functions of transfer of alcohols from water to aqueous surfactants

In ternary aqueous solutions, hydrophobic solutes such as alcohols tend to aggregate with surfactants to form mixed micelles. These systems can be studied by meas of the functions of transfer of hydrophobic solutes from water to aqueous solutions of surfactant. These thermodynamic functions often go through extrema in the critical micellar concentration (CMC) region of the surfactant. A simple model based on interactions between surfactant and hydrophobic solute monomers, on the distribution of the hydrophobic solute between water and the micelles and on the shift in the CMC induced by the hydrophobic solute, can simulate the magnitude and trends of the transfer functions using parameters which are mostly derived from the binary systems. In order to check the model more quantitatively, volumes and heat capacities of transfer of alcohols from water to aqueous solutions of a nonionic surfactant, octyldimethylamine oxide, were measured. A quantitative agreement was achieved with three adjustable parameters. Good fits are also obtained for the transfers to the ionic surfactants, octylamine hydrobromide and sodium dodecylsulfate. When the equilibrium displacement contribution is small, the distribution constants and the partial molar properties of the alcohols in the micellar phase agree well with the parameters obtained with similar models.     

A group additivity approach for the estimation of heat capacities of organic liquids and solids at 298 K

A group additivity method is described which provides heat capacity estimates of the condensed phase. The data base consists of 810 liquids and 446 solids. Group values for carbon in various common substitution and hybridization states and for 47 functional groups are provided. The standard error of estimation using this approach on this data base is 19.5 (liquids) and 26.9 J/ (mole K) (solids). This can be compared to typical experimental uncertainties of 8.12 and 23,4 J/ (mole K) associated with these measurements, respectively. Experimental uncertainties were estimated from the numerical differences obtained for a given substance from multiple independent literature reports.     

拟静态法测定混合溶剂的汽化热和汽化熵

讨论了沸点升高法测定混和溶剂化热和汽化熵的原理，并用拟静态法测定了乙醇－丙酮，并－四氯化碳和苯，甲苯三组混和溶剂在不同组成下的正常沸点，根据沸点数据求得了混和泶微分汽化热和汽化熵，实验结果表明，二元混和溶剂与理想溶液偏离不大时，其正常汽化熵符合Ｔｒｏｕｔｏｎ规则。     

Thermodynamics of liquid mixtures containing n-alkanes and strongly polar components: VE and C P E of mixtures with either pyridine or piperidine

Excess molar volumes V _E and excess molar heat capacities C _P ^/E at constant pressure have been obtained, as a function of mole fraction x₁, for several binary liquid mixtures belonging either to series I: pyridine+n-alkane (C_lH_2l+2), with l=7, 10, 14, 16, or series II: piperidine+n-alkane, with l=7, 8, 10, 12, 14. The instruments used were a vibrating-tube densimeter and a Picker flow microcalorimeter, respectively. V ^E of pyridine+n-heptane shows a S-shaped composition dependence with a small negative part in the region rich in pyridine (x₁>0.90). All the other systems show positive V ^E only. The excess volumes increase with increasing chain length l of the n-alkane. The excess molar heat capacities of the mixtures belonging to series II are all negative, except for a small positive part for piperidine+n-heptane in the region rich in piperidine (x₁>0.87). The C _P ^/E at the respective minima, C _P ^/E (x_1,min ), become more negative with increasing l, and the x_1,min values range from about 0.26 (l=7) to 0.39 (l=14). Most interestingly, mixtures of series I exhibit curves of C _P ^/E against x₁ with two minima and one maximum, the so-called W-shape curves.Dedicated to Professor A. Néckel on the occasion of his 65^th birthday. Communicated in part at the XVII^èmes Journées de Calorimétrie, d'Analyse Thermique et de Thermodynamique Chimique, Ferrara, Italy, 27–30 October, 1986.     

A novel approach for introducing particulate matter into thermal plasmas: The triple-cathode arc

A coalesced high-intensity dc discharge is maintained between three cathodes and a single anode, stabilized by using resistors on each cathode leg. Jets of plasma gas are produced from either the cathode area or the anode area of the device. Cathode jets are generated by the self-induced pumping at the cathode tips and augmented by central gas injection. Arc voltage-current characteristics show classical convection-stabilized arc behavior. Anode heat transfer rates may be substantially increased by central gas injection toward the anode. Temperature fields in the coalesced, axially symmetric portion of the arc are determined spectrometrically and compared to those of a classical single-cathode free-burning arc.     

Greater insight into the MTDSC technique involving fundamental sinusoidal heat flow equations

Summary Modulated temperature DSC was investigated, comparing data found experimentally to that derived from theory. Deviation from theory was found with regard to the amplitude of the modulated heat flow signal when large modulation amplitudes were employed in the experiment. These deviations were determined to be dependent on the absolute temperature and it was concluded that further investigation of the heat flow signal obtained during MTDSC experiments is required.     

Enthalpies of Dilution of Aqueous Solutions of NaOH, KOH, and CsOH at 300, 325, and 350°C

Dilution enthalpies, measured using isothermal flow calorimetry, are reported for aqueous solutions of KOH and CsOH at 300°C and 11.0 MPa, 325°C and 14.8 MPa, and for aqueous solutions of NaOH, KOH, and CsOH at 350°C and 17.6 MPa. Previously collected dilution enthalpies for aqueous solutions of NaOH at 300°C and 9.3 MPa and at 325°C and 12.4 MPa were included when fitting the Pitzer parameters. The concentration range of the hydroxide solutions was 0.5–0.02 molal. Parameters for the Pitzer excess Gibbs ion-interaction equation were determined from the fits of the experimental heat data. Equilibrium constants, enthalpy changes, entropy changes, and heat capacity changes for alkali metal ion association with hydroxide ion were estimated from the heat data. For all systems, the enthalpy changes and entropy changes were positive and had accelerating increases with temperature. The resulting equilibrium constants show significant, but smaller, increases with temperature.     

Thermal studies on some organotin(IV) complexes with piperidine and 2-aminopyridine dithiocarbamates

The complexes of piperidine dithiocarbamate, 2-aminopyridine dithiocarbamate and organotin(IV) of the type R₃Sn(L¹), R₂Sn(L¹)₂, R₃Sn(L²), R₂Sn(L²)₂, [R=C₆H₅CH₂ (benzyl), p-ClC₆H₄CH₂ (p-chlorobenzyl), L ¹=sodium piperidine dithiocarbamate and L ²=sodium 2-aminopyridine dithiocarbamate] have been synthesised and characterised by spectral studies (IR, UV, ¹H NMR). Thermogravimetric (TG) and differential thermal analytical (DTA) studies have beeen carried out for these complexes and from the TG curves, the order and apparent activation energy for the thermal decomposition reactions have been elucidated. The various thermal studies have been correlated with some structural aspects of the complexes concerned. From DTA curves, the heat of reaction has been calculated.     

N6H6结构和性质的理论研究

采用密度泛函理论的b3lyp方法在6-311＋＋G**基组上对15种分子式为N₆H₆的氮氢化合物进行了理论计算, 并且应用了自然键轨道理论(Nature Bond Orbital, NBO)和分子中的原子理论(Atoms In Molecules, AIM)分析了这些化合物的成键特征和相对稳定性. NBO分析表明N原子孤对电子到相邻的氮氮键的超共轭作用是影响氮氮键长变化的主要因素, AIM计算的氮氮键的键临界点电荷密度与键长呈反比关系. 而且, NBO的立体和超共轭分析表明立体交换排斥能和超共轭作用对这些分子的相对稳定性起了重要作用. G3MP2计算结果表明氮氢化合物的生成热均为正, 并且环状分子的能量和生成热都高于链状分子.