Optically clear simultaneous interpenetrating polymer networks based on poly(ethylene glycol) diacrylate and epoxy. I. Preparation and characterization

Poly(ethylene glycol) diacrylate was synthesized from poly(ethylene glycol) of molecular weight 600 with acryloyl chloride in a molar ratio of 1:2. Poly(ethylene glycol) diacrylate (PEGDA) was then blended with diglycidyl ether of bisphenol A (DGEBA) in various ratios, followed by curing with 2,2′-azobisisobutyronitrile (AIBN) and isophronediamine (IPDA) simultaneously. Viscosity changes before and during IPN formation were examined with a Brookfield viscometer. Formation of H-bonding and functional group changes were investigated with FTIR. Exothermic curing thermograms were recorded with dynamic DSC. Optically clear IPNs thus obtained were characterized with rheometric dynamic spectroscopy (RDS) and scanning electron microscopy (SEM) to check possible compatibility of the two networks. Experimental results revealed that during IPN formation hydrogen bonds between PEGDA and DGEBA and interlock of networks had profound effect on viscosity change and pot-life. Complete compatibility of the IPNs was found as DGEBA content was higher than 50% by weight. The compatibility between PEGDA and DGEBA networks was evidenced from inner shift of a single damping peak in RDS. In the meantime, SEM micrographs confirmed the coincidence with the result of RDS © 1992 John Wiley &Sons, Inc.     

Effects of cobalt-60 γ-ray irradiation on fresh-keeping and storage of kiwifruits

The boxes contained kiwifruits were irradiated with cobalt-60 γ-rays at different dosages (0.6 , 1.8 and 3.6 KGy) and stored in a room ventilated at night, the natural ambient air being used as cool source.The results showed that the treatment which fruits irradiated with 0.6 KGy was the best after 85 days. It gave the normal-fruit rate of 95.10%, fruit flesh hardness of 4.10 Kg · cm^-2, fresh and plump fruits, good quality and less Vc loss.     

Electrode kinetics of Eu3+/Eu2+ reaction by cyclic voltammetry

The cyclic voltammetric behaviour of Eu³⁺/Eu²⁺ couple at hanging mercury drop electrode (HMDE) has been studied in chloride, bromide, iodide, thiocyanate and EDTA supporting electrolytes. The apparent rate constant and transfer coefficient for these systems have been calculated at various voltage scan rates, without using the data for standard or formal potential. The values have been compared with those obtained by earlier workers through other electrochemical methods.     

Momentum transfer in an agitated vessel with off-centred impellers

Momentum transfer was investigated in an unbaffled agitated vessel of inner diameter 0.3 m equipped with different off-centred impellers. The distribution of the shear rate on the tank wall as a function of the impeller type and Reynolds number was studied in the turbulent regime of the Newtonian liquid flow. The dependences of the averaged dimensionless shear rate, friction coefficient, and dissipated energy on the Reynolds number and eccentricity ratio were approximated using four-parameter equations. Presented at the 33rd International Conference of the Slovak Society of Chemical Engineering, Tatranské Matliare, 22–26 May 2006.     

Stochastic simulation of reactive separations in capillary electrophoresis

A stochastic (Monte Carlo) simulation is used to investigate thermodynamic and kinetic contributions from the reversible A <--> B reaction in capillary electrophoresis (CE). The effects of equilibrium constant, rate constant, and electrophoretic mobility on the molecular zone profiles and the corresponding statistical moments are evaluated. As the reaction approaches steady state, the velocity of the zone is governed by the equilibrium constant and the electrophoretic mobilities of the reacting molecules. When the equilibrium constant is less than unity, the mean zone velocity is more similar to that of the reactant A. Conversely, when the equilibrium constant is greater than unity, the velocity is more similar to that of the product B. The extent of zone-broadening and asymmetry at steady state is dependent upon the equilibrium constant, the characteristic reaction lifetime, and the electrophoretic mobility difference between reacting molecules. If all other parameters are held constant, the plate height is greatest and skew is least when the equilibrium constant is unity. The plate height increases linearly with the characteristic reaction lifetime and electrophoretic mobility difference, whereas the skew is independent of these parameters. These conclusions have important implications for the elucidation of thermodynamic and kinetic information from experimental data.     

Gas chromatographic method for studying the rate of photodegradation of some nitrogen-containing pesticides

Summary The photodegradation behaviour of 12 nitrogen-containing herbicides (atrazine, cyanazine, terbuthylazine, terbutryn, EPTC, buthylate, molinate, cycloate, vernolate, fenuron, chloroxuron, and methabenzthiazuron) has been examined. The compounds were degraded completely when exposed to a mercury-vapour lamp; the degradation process was followed by consecutive GC measurements. All the compounds studied had measurable photochemical activity, although actual and average degradation rates varied significantly. All the compounds except terbutryn furnished more than one major degradation product, in different ratios. Presented at Balaton Symposium '01 on High-Performance Separation Methods, Siófok, Hungary, September 2–4, 2001     

Kinetic parameters of unsaturated polyester resin modified with poly(ε -caprolactone)

The mineral sabugalite (HAl)_0.5[(UO₂)₂(PO₄)]₂⋅8H₂O, has been studied using a combination of energy dispersive X-ray analysis, X-ray diffraction, dynamic and controlled rate thermal analysis techniques. X-ray diffraction shows that the starting material in the thermal decomposition is sabugalite and the product of the thermal treatment is a mixture of aluminium and uranyl phosphates. Four mass loss steps are observed for the dehydration of sabugalite at 48°C (temperature range 39 to 59°C), 84°C (temperature range 59 to 109°C), 127°C (temperature range 109 to 165°C) and around 270°C (temperature range 175 to 525°C) with mass losses of 2.8, 6.5, 2.3 and 4.4%, respectively, making a total mass loss of water of 16.0%. In the CRTA experiment mass loss stages were found at 60, 97, 140 and 270°C which correspond to four dehydration steps involving the loss of 2, 6, 6 and 2 moles of water. These mass losses result in the formation of four phases namely meta(I)sabugalite, meta(II)sabugalite, meta(III)sabugalite and finally uranyl phosphate and alumina phosphates. The use of a combination of dynamic and controlled rate thermal analysis techniques enabled a definitive study of the thermal decomposition of sabugalite. While the temperature ranges and the mass losses vary due to the different experimental conditions, the results of the CRTA analysis should be considered as standard data due to the quasi-equilibrium nature of the thermal decomposition process. The online version of the original article can be found at     

116例冠心病患者血清中钙镁钡铝锶含量的研究

测定１１６例冠心病患者血清中钙，镁，钡，铝和锶的含量并与正常值比较，常量元素钙，镁和微量元素锶降低，而微量元素钡和铝升高，它们之间的差异都有显著或高度显著性。Ｐ〈０．０５或Ｐ〈０．０１。     

Pyrolysis and TG Analysis of Shivee Ovoo Coal from Mongolia

The coal sample of the Shivee Ovoo deposits has been non-isothermally pyrolysed in a thermogravimetric analyser to determine the influence of temperature, heating rate and purge gas employed on the thermal degradation of the sample. The heating rates investigated in the TG were 10–50 K min^–1 to final temperature of 1000°C. N₂or CO₂ were employed as well as type of purge gas on the process of thermal degradation of the coal sample. The coal was also investigated in a fixed bed reactor to determine the influence of temperature and heating rate of the pyrolysis on the yield of products and composition of the gases evolved. The main gases produced were H₂, CH₄, C₂H₂, C₂H₄, C₂H₆, C₃H₆ and C₃H₈ and also minor concentrations of other gases. This revised version was published online in August 2006 with corrections to the Cover Date.     

原油乳状液破乳的动态法研究

The stability of different crude oil emulsions from ASP flooding production well is studied by the method of a stirred tank. The demulsifying of crude-oil emulsion by different demulsifying agents is discussed. The breakage of the crude oil emulsions from the well PO11 by the different types and concentrations of the emulsifying agents is also discussed. The breaking mechanism of the demulsifying agent is described microscopically.