应变速率和电位对应力腐蚀裂纹扩展的影响

以滑移-溶解-再钝化模型为基础,推导出应力腐蚀裂纹扩展速率与裂尖应变速率和电位之间的理论公式.计算表明,在裂纹扩展速率与裂尖应变速率的关系曲线中有两个特征区域.裂纹扩展速率在区域I随裂尖应变速率增加而增大,而在区域II不随裂尖应变速率的改变而变化.用慢应变速率拉伸技术（SSRT）测量了304L不锈钢的裂纹增长速率.当电位控制在区域II的阳极区时,理论计算的裂纹扩展速率与实验得到的结果比较吻合.     

Methyl cellulose-based edible films and coatings I. Effect of plasticizer content on water and 1-octen-3-ol sorption and transport

Edible films were prepared from methyl cellulose with various concentrations of poly(ethylene glycol) 400 (PEG400) used as a plasticizer. Water vapour and 1-octen-3-ol (an aroma compound) were selected as hydrophilic and hydrophobic volatile penetrants respectively. Their solubility and permeability through methyl cellulose-based edible films were studied using gas chromatography methods. Whatever penetrant was used, the flux increased with the PEG400 content. Transfer behaviour, i.e., the order of increased magnitude of the transfer rate, strongly depends on the nature of the volatile compound. However, water sorption only depends on the PEG400 content whereas the aroma compound sorption is affected by both the water and the PEG400 concentrations. Relationships between solubility and permeability can be partially explained by the plasticization phenomenon.     

纳米级碳导电剂的种类对licoo2电化学性能的影响

碳纳米管;锂离子电池;正极;倍率容量;导电剂     

Growth transition and morphology change in polypropylene

The growth rate of isotactic polypropylene is deduced from microscopic observations during isothermal crystallizations. A change in the growth regime is observed at 138 C and interpreted as a Regime III Regime II transition, according to Hoffman's kinetic theory of polymer crystallization. A Regime II Regime I transition is also theoretically predicted at 155 C, i. e. at a temperature outside the investigated temperature range. The Regime III Regime II transition is related to the positive to negative change in the spherulite birefringence, which is generally attributed to a change in the organization of crystalline lamellae: quadritic arrays of intercrossing lamellae atT _c < 138 C (Regime III) and preferentially radiating lamellae atT _c > 138 C (Regime II). It is suggested that such a morphological change could be interpreted using the concept of non-adjacent re-entry introduced in Hoffman's kinetic theory. This interpretation could also explain the interspherulitic ruptures observed in negative spherulites.     

A density functional study of propylene glycol conversion to propanal and propanone of various acid-catalyzed reaction models: a water-addition effect

The acid-catalyzed models on reaction mechanisms of pinacol rearrangement of propylene glycol conversion to propanal and propanone have been investigated using the density functional method at 298.15 K. Thermodynamic quantities of activation steps of four water-addition models were obtained. The number of added water interacting with the transition states of three concerted pathways has obviously affected the product ratio. The relative energetic profiles of the conversion reactions of all solvation models have been comparatively displayed. Estimation of the percent ratio of product composition computed from activation free energies of each acid-catalyzed reaction model was carried out. The percent ratios of propanal and propanone were decreased as the number of added water increased.     

Study on flame-retardant mechanism of polycarbonate containing sulfonate-silsesquioxane-fluoro retardants by TGA and FTIR

The flame retardancy of bisphenol A polycarbonate (PC) containing potassium diphenylsulfone sulfonate (KSS), poly(aminopropyl/phenylsilsesquioxane) (PAPSQ) and poly(vinylidenefluoride) (PVDF) was measured by limited oxygen index (LOI) and examined according to UL94. A high LOI and UL94 V-0 rating for 1.6 mm thickness samples were obtained by a combined use of equivalent KSS, PAPSQ and PVDF at 0.1-0.3 wt% loading, respectively. The improvement in flame retardancy of PC compositions arose from the synergistic interaction of three additives. Thermogravimetric analysis (TGA) indicated that the combination decreased the activation energy (E) of PC degradation and elevated the thermal degradation rate of PC to ensure the formation of an insulating carbon layer. FTIR analysis showed that the LOI char of PC containing the three additives took on a highly cross-linking aromatic ester and ether structure.     

CCl2(A1B1)被O2及取代甲烷类分子猝灭的动力学研究

对CCl4／Ar混合气体放电产生CCl2自由基，再用541.52nm激光将电子基态CCl2激发到激发态A^1B1（0，4，0）振动态k=0能级上，通过检测 激发态CCl2时间分辨荧光信号，测得室温下CCl2(A^1B1)被O2，CF4，CF2Cl，CH3NO2，CH2Br2等分子猝灭的实验结果，用改进的三能级模型分析处理实验数据，获得态分辨速常数KA和Ka值，并对实验结果进行了讨论。     

血镁水平与糖尿病肾病

为探讨糖尿病肾病 (DN)患者血镁水平 ,以 1 5 9例 2型糖尿病 (T2DM)患者为研究对象 ,用xylidylblue比色法测定了其正常白蛋白尿期、微量白蛋白尿期 (早期DN)、临床DN及晚期DN血镁水平 ,与 2 0例正常对照组相比较 ;同时将 1 1 0例DN患者分为肾功能不全代偿组、失代偿组和肾功能衰竭组 ,将其血镁水平与 1 0 2例慢性肾小球肾炎 (CGN)患者相比较 ,组间比较采用t检验 ;对 79例T2DM正常白蛋白尿期及微量白蛋白尿期患者尿白蛋白排泄率 (UAER)与血镁水平进行了等级相关分析。结果表明 ,T2DM正常白蛋白尿期、早期DN及临床DN血镁水平降低 ,晚期DN血镁水平升高 ,各组与正常对照组相比存在显著性差异 (P <0 0 5或P <0 0 1 ) ;T2DMDN及CGN肾功能不全代偿期、失代偿期及肾功能衰竭期血镁水平渐升高 ,且肾功能处于同一期的DN和CGN相比 ,前者血镁水平均较后者显著降低 (P <0 0 1或P <0 0 5 ) ;T2DM正常白蛋白尿期和微量白蛋白尿期血镁水平与UAER呈负相关 (r=0 5 47,P <0 0 1 )。提示T2DM患者肾功能正常时存在低镁倾向 ,但晚期DN血镁水平升高 ;随着肾功能不全进展 ,DN和CGN患者血镁水平升高 ,但前者血镁水平仍较后者低 ,镁代谢紊乱与DM及其并发症的相互关系有待进一步研究 ;血镁水平测定可否作为DN的早期诊断指标亦     

Markov processes in single molecule fluorescence

This article examines the current status of Markov processes in single molecule fluorescence. For molecular dynamics to be described by a Markov process, the Markov process must include all states involved in the dynamics and the first-passage time (FPT) distributions out of those states must be describable by a simple exponential law. The observation of non-exponential FPT distributions or other evidence of non-Markovian dynamics is common in single molecule studies and offers an opportunity to expand the Markov model to include new dynamics or states that improve understanding of the system.     

2,2''''-联吡啶和亚铁氰化钾对乙醛酸化学镀铜的影响

以乙醛酸作还原剂、Na2EDTA为络合剂、2,2'-联吡啶和亚铁氰化钾作为添加剂组成化学镀铜体系,研究了两种添加剂对化学镀铜速率、镀层表面形貌、组成和结构的影响.结果表明:添加适量的2,2'-联吡啶和亚铁氰化钾,不仅提高了镀液的稳定性,而且使沉积速率增加1倍.这两种添加剂的同时使用,使镀层颜色变亮,形貌发生变化.所得镀层是多晶铜,没有发现夹杂Cu20.