The preparation of immobilized polysiloxane coated on packings materials for high-pressure gas chromatography

Summary In high pressure gas chromatography efficient columns can be packed by the slurry packing technique. However, polysiloxane stationary phases like OV 101 and OV 3 dissolve in the packing liquids. In order to make them suitable for slurry packing these stationary phases have to be made insoluble. This immobilization is achieved by bonding the stationary phases to the surface by means of a high temperature treatment. Successive layers are applied by recoating and are immobilized by a cross-link reaction. A range of loading percentages from 4 upto 20 by weight could be prepared in this way. On the evaluated columns compounds like butanol and dioxane elute as rather symmetrical peaks with the correct values for the retention index, indicating the absence of adsorption effects. Efficiency is good and bleeding rate is low. The columns could be successfully used in the analysis of turpentines.     

Compehensive two-dimensional gas chromatography (GC×GC) and its applicability to the characterization of complex (petrochemical) mixtures

In general, petrochemical products contain only a limited number of chemical classes of compounds (sample dimensionality). The enormous number of individual components within these classes, however, soon puts limitations upon a single chromatographic technique when it comes to adequate characterization of these products. Comprehensive two-dimensional gas chromatography (GC×GC) clearly opens the possibility of estimating the composition of hydrocarbon mixtures in a far more detailed fashion than hitherto possible. Although the emphasis of papers of GCxGC thus far almost exclusively applies to the unsurpassed peak-capacity, in the oil industry there is a need for characterization, rather than for analyzing all the individual compounds. In principle a GCxGC system can provide an almost perfect match between its intrinsic properties and the dimensionality of oil samples. To establish the applicability of GCxGC towards petrochemical analytical challenges, a commercially aavailable prototype instrument was subjected to an exhaustive characterization of a typical hydrocarbon precess stream and a fast characterization of a light gas oil. Although there are no fundamental limitations towards the quantitative aspects of a GCxGC system, this paper confines itself to qualitative results only. Quantitative aspects of GCxGC will be published in a forthcoming paper.     

Synthesis and characterization of MCM-48 tubular membranes

MCM-48 membranes have been prepared on alumina supports of different pore sizes. A battery of characterization techniques has been used to study the physical properties and the quality of the membranes prepared. The highest quality membranes were prepared on supports with pore size of up to 60 nm. The MCM-48 membranes were tested in the separation of gas phase mixtures and a cyclohexane/O₂ selectivity higher than 270 was obtained. The selective separation of organic compounds from inert components is a result of the cooperative effects of capillary condensation in MCM-48 pores and of the specific interactions of the permeating compounds and the membrane material.     

Inverse relaxation-model and relation to recovery internal friction

Inverse relaxation is studied for hard elastic polypropylene (HEPP), rubber and non-elastic polypropylene. The results show that contractive stress, stress, and internal friction are three essential factors related to the phenomenon. A three-element model in which each element has a definite meaning is proposed to describe this phenomenon. The results also show that, in the first cyclic deformation, relaxation time increases with the increase of recovery for all the materials, which indicates that recovery viscosity increases with the increase of recovery, but the stress rising amplitude (SRA) of inverse relaxation has a maximum in the recovery range. Analysis indicates that SRA equals recovery internal friction (RIF) for ideal material in which stress is solely a function of strain, independent of paths, and approximately equals RIF for non-ideal material at a given strain. From this principle it is found that the order of the work counteracted by RIF for the four materials is the same as that of their second hysteresis loop, and the RIF of HEPP has a sudden increase at the later recovery range.     

Methane production from synthesis gas using a mixed culture ofR. rubrum M. barkeri,and M. formicicum

The components of synthesis gas, CO, H₂, and CO₂, may be converted into CH₄ biologically through either acetate or H₂/CO₂ as intermediates. Of these two routes, conversion through H₂/CO₂ is preferred. This paper presents results of mixed-culture studies employing the photosynthetic bacteriumR. rubrum for converting CO to CO₂ and H₂ by the water gas shift reaction and two methanogens,M. formicicum andM. barkeri, for converting CO₂ and H₂ into CH₄. Results are presented for triculture operation in two types of reactors, the packed bubble column and the trickle-bed reactor.     

ICP-MS for elemental speciation studies

The use of inductively coupled plasma mass spectrometry (ICP-MS) coupled with separation techniques for the purpose of elemental speciation has recently gained a lot of attention. Much of this is due to ever improving separation capabilities of Chromatographic techniques, the high sensitivity of ICP-MS, and the continuing development of better interface techniques. Additionally, there is a growing awareness of the need to monitor various species of an analyte, rather than just total analyte concentrations, due to their often varying natures. For the sake of learning from different elemental speciation approaches, this review brings together some selected types of elemental speciation which have been recently seen in literature. These include separations using various forms of liquid chromatography, such as reversed phase, reversed phase ion pairing, micelle, ion exchange, and size exclusion. Elemental speciation employing gas Chromatographie separations and supercritical fluid separations are discussed as well as elemental speciation using capillary electrophoresis.     

Hydrate inclusion compounds

There are three general classes of hydrate inclusion compounds: the gas hydrates, the per-alkyl onium salt hydrates, and the alkylamine hydrates. The first are clathrates, the second are ionic inclusion compounds, the third are semi-clathrates. Crystallization occurs because the H₂O molecules, like SiO₂, can form three-dimensional four-connected nets. With water alone, these are the ices. In the inclusion hydrates, nets with larger voids are stabilized by including other guest molecules. Anions and hydrogen-bonding functional groups can replace water molecules in these nets, in which case the guest species are cations or hydrophobic moieties of organic molecules. The guest must satisfy two criteria. One is dimensional, to ensure a comfortable fit within the voids. The other is functional. The guest molecules cannot have either a single strong hydrogen-bonding group, such as an amide or a carboxylate, or a number of moderately strong hydrogen-bonding groups, as in a polyol or a carbohydrate.The common topological feature of these nets is the pentagonal dodecahedra: i.e., 5¹²-hedron. These are combined with 5¹²6²-hedra, 5¹²6³-hedra, 5¹²6⁴-hedra and combinations of these polyhedra, to from five known nets. Two of these are the well-known 12 and 17 Å cubic gas hydrate structures,Pm3n, Fd3m; one is tetragonal,P4 ₂/mnm, and two are hexagonal,P6 ₃/mmc andP6/mmm. The clathrate hydrates provide examples of the two cubic and the tetragonal structures. The alkyl onium salt hydrates have distorted versions of thePm3n cubic, the tetragonal, and one of the hexagonal structures. The alkylamine hydrate structures hitherto determined provide examples of distorted versions of the two hexagonal structures.There are also three hydrate inclusion structures, represented by single examples, which do not involve the 5¹²-hedra. These are 4(CH₃)₃CHNH₂·39H₂O which is a clathrate; HPF₆·6H₂O and (CH₃)₄NOH·5H₂O which are ionic-water inclusion hydrates. In the monoclinic 6(CH₃CH₂CH₂NH₂)·105H₂O and the orthorhombic 3(CH₂CH₂)₂NH·26H₂O, the water structure is more complex. The idealization of these nets in terms of the close-packing of semi-regular polyhedra becomes difficult and artificial. There is an approach towards the complexity of the water salt structures found in the crystals of proteins.     

基于激光诱导击穿光谱(LIBS)的煤灰熔点快速检测

炉内结渣是影响火电机组和气化工艺可靠运行的关键因素之一,准确预测灰熔点可以提前调整炉膛出口温度以避免结渣。本论文采用激光诱导击穿光谱（LIBS）采集煤灰样中金属元素的光谱,分别建立煤灰中的金属元素的谱线强度与煤灰熔点的随机森林模型、支持向量机回归模型和线性回归模型,直接预测煤灰熔点温度。采用基于马氏距离(MD)的异常数据剔除算法和基于稀疏矩阵的基线估计与降噪算法（BEADS）,对粉煤灰样的全光谱数据进行了预处理。随机森林模型对粉煤灰熔点的预测平均相对误差（MRE）为54.74%,支持向量机回归模型的预测平均相对误差为60.08%,而线性回归模型的预测平均相对误差达到了9.78%。研究结果表明,线性回归模型对煤灰熔点的预测结果更准确。     

A Note on ＂Global Exponential Convergence Analysis of Hopfield Neural Networks with Continuously Distributed Delays＂

In this note, we would like to point out that （i） of Corollary 1 given by Zhang et al. （cf Commun. Theor. Phys. 39 （2003） 381） is incorrect in general.     

Found in the Folds: A Rediscovery of Ancient Egyptian Pleated Textiles and the Analysis of Carbohydrate Coatings

Charles T. Currelly, first director of the Royal Ontario Museum, participated in excavations of the tomb of King Nebhepetre, now known as Mentuhotep II, (Dynasty XI) in Deir el-Bahri, Egypt in 1906. He brought to Canada many objects from the excavations, and objects that he purchased while in Egypt; these formed the initial collection of the museum. Among the objects were seven fragments of fine linen cloth with intricate pleat patterns. Recently, the cloths became the subject of a study to learn how they had retained their pleats for 4000 years. Samples were examined and analysed using polarised light microscopy, scanning electron microscopy-electron dispersive X-ray spectrometry, gas chromatography-mass spectrometry, and pyrolysis-gas chromatography-mass spectrometry. Three of the cloths were likely fragments of clothing re-purposed as bandages and were found to be saturated in mummification balms composed of Pinaceae resin, Pistacia resin, and an essential oil characterised by a high abundance of cedrol, possibly originating from a juniper species. All seven of the cloths were found to have traces of polysaccharides from two probable sources: an arabinogalactan gum such as gum arabic or a fruit gum, and a polyglucoside, possibly starch.