Étude des Interactions du Zinc et de l'Or dans l'Étain Liquide

Abstract

Les auteurs ont étudié par voie électroehimique l'influence de faibles additions d'or sur les propriétés thermodynamiques du zinc en solution diluée dans l'étain fondu. Le paramètre d'interaction de Wagner ?_Zn ^Au et sa variation avec la température ont été déterminés dans l'intervalle de température 420–650°C: ?_Zn ^Au = 2.71 – 5.92. 10³/T.     

Diamond kinoform hard X‐ray refractive lenses: design,nanofabrication and testing

Motivated by the anticipated advantageous performance of diamond kinoform refractive lenses for synchrotron X‐ray radiation studies, this report focuses on progress in designing, nanofabricating and testing of their focusing performance. The method involves using lift‐off and plasma etching to reproduce a planar definition of numerically determined kinoform refractive optics. Tests of the focusing action of a diamond kinoform refractive lens at the APS 8‐ID‐I beamline demonstrate angular control of the focal spot.     

多孔软硬磁Ni0.5Zn0.5Fe2O4/SrFe12O19复合纤维制备及吸波性能

通过静电纺丝技术制备了多孔软硬磁Ni_0.5Zn_0.5Fe₂O₄/SrFe₁₂O₁₉复合纤维,利用综合热重分析仪（TG-DSC）、X射线衍射仪（XRD）、扫描电子显微镜（SEM）、透射电子显微镜（TEM）、X射线能谱仪（EDS）和矢量网络分析仪（VNA）等对复合纤维的晶体结构、微观形貌和电磁性能进行了表征,研究了不同软硬磁质量比对纤维结构和性能的影响。结果表明：900℃下制备的复合纤维具有立体多孔结构,软硬磁质量比为1∶3时,复合纤维的比表面积达到55 m²·g^-1。吸波性能测试结果显示,当吸波剂涂层厚度为3.5 mm时,复合纤维在10.6 GHz处反射损失（R_L）值达到-31.9 dB,在2~18 GHz频率范围内,R_L值小于-10 dB的吸收带宽达到10.5 GHz,覆盖了整个X波段（8.2~12.4 GHz）和Ku波段（12.4~18 GHz）,显示出优异的宽波段吸收性能。     

Sodiation Of Hard Carbon: How Separating Enthalpy And Entropy Contributions Can Find Transitions Hidden In The Voltage Profile

Sodium-ion batteries (NIBs) utilize cheaper materials than lithium-ion batteries (LIBs) and can thus be used in larger scale applications. The preferred anode material is hard carbon, because sodium cannot be inserted into graphite. We apply experimental entropy profiling (EP), where the cell temperature is changed under open circuit conditions. EP has been used to characterize LIBs; here, we demonstrate the first application of EP to any NIB material. The voltage versus sodiation fraction curves (voltage profiles) of hard carbon lack clear features, consisting only of a slope and a plateau, making it difficult to clarify the structural features of hard carbon that could optimize cell performance. We find additional features through EP that are masked in the voltage profiles. We fit lattice gas models of hard carbon sodiation to experimental EP and system enthalpy, obtaining: 1. a theoretical maximum capacity, 2. interlayer versus pore filled sodium with state of charge.     

初中化学“溶液”的项目式教学*——白砂糖的梦想之路

以“白砂糖的梦想之路”为项目学习主题,呈现了初中化学“溶液”的项目教学案例。基于棒棒糖的制作过程开发了系列学习任务,有助于学生在真实的问题情境中发展核心素养和构建灵活的知识基础。     

AN INDIVIDUAL‐BASED MODEL FOR FERAL HOGS IN GREAT SMOKY MOUNTAINS NATIONAL PARK

The expansion of feral hog (Sus scrofa) populations in the United States has resulted in increased efforts to develop and implement control strategies designed to minimize the impacts done by this invasive species. We describe an individual‐based model for feral hogs in Great Smoky Mountains National Park (GSMNP). The objectives of the model are to provide an understanding of the population dynamics of this feral hog population and to determine the efficacy of the annual harvest as a population control method. Results suggest that the dynamics of the population are driven by fall hard mast production and the GSMNP harvests currently limit growth of the population, but these control efforts have not reduced the population.     

激光熔覆硬质合金强化化纤切断刀的研究

在机械压制法预置硬质合金WC/Co粉末的条形55Si2Mn弹簧钢上,用激光熔覆方法制备了化纤切断刀.调整熔覆层粉末配方中Al、TiC的加入量,结果表明加适量的Al粉能有效地抑制气孔,加TiC粉末能提高熔覆硬度.通过优化激光熔覆工艺参数,得到了无气孔缺陷、组织性能良好、硬度达到HV0.21250的激光熔覆层,达到了化纤切断刀的性能要求.     

磁头/磁盘滑动接触下磁盘温度及热退磁临界条件的研究

采用二维轴对称有限元模型计算磁头/磁盘滑动接触下,铝质磁盘的稳态温度和热应力场以及热退磁临界条件.结果表明:磁盘温度在极短时间内升至摩擦稳态值,然后缓慢线性升高到最终稳态值;经过充分热传导和热交换后磁盘的温度梯度较小,此时磁层内的热应力集中分布于磁盘固定端边缘附近;磁盘的稳态温度和热应力均随速度增大而增大,且载荷越大其值增大越快;热应力小于1.2 GPa时所对应的速度和载荷为安全工况;温升大于373 K时所对应的工况将导致磁盘退磁.     

Energy spectrum of multi-radiation of X-rays in a low energy Mather-type plasma focus device

The multi-radiation of X-rays was investigated with special attention to their energy spectrum in a Mather-type plasma focus device （operated with argon gas）. The analysis is based on the effect of anomalous resistances. To study the energy spectrum, a four-channel diode X-ray spectrometer was used along with a special set of filters. The filters were suitable for detection of medium range X-rays as well as hard X-rays with energy exceeding 30 keV. The results indicate that the anomalous resistivity effect during the post pinch phase may cause multi-radiation of X-rays with a total duration of 300 ± 50 ns. The significant contribution of Cu-Kα was due to the medium range X-rays, nonetheless, hard X-rays with energies greater than 15 keV also participate in the process. The total emitted X-ray energy in the forms of Cu-K and Cu-K/3 was around 0.14 ± 0.02 （J/Sr） and 0.04 ±0.01 （J/Sr）, respectively. The total energy of the emitted hard X-ray （〉 15 keV） was around 0.12± 0.02 （J/Sr）.