On the tribological characteristics of dynamically loaded journal bearing with micropolar fluids

The addition of the additives to the lubricant oil to enhance the characteristics of the lubricant will influence the performance of the bearings. Based on the theory of micropolar fluids, the tribological characteristics of a dynamically-loaded journal bearing are numerically studied. Comparisons are made between the Newtonian fluids and the micropolar fluids. It is shown that for a dynamically-loaded journal bearing, the micropolar fluids yield an increase not only in the friction force, but also in the friction coefficient. In addition, the oil film pressure and the oil film thickness are obviously higher than that of Newtonian fluids.     

受迫振动演示实验装置

本文叙述用示波器显示来演示受迫振动的实验装置，可直观地向学生展示受迫振动的幅频特性和相频特性。     

光敏电阻基本特性测量实验的设计

介绍了测量CdS光敏电阻的伏安特性和光照特性的实验方法，并给出了相应的实验结果。     

非晶态硒化镉薄膜瞬态光电特性

本文报道用真空热蒸发法淀积的非晶态硒化镉薄膜作光敏介质制备超快光电导探测器。用对撞脉冲锁模Nd:YAG激光器产生的超短光脉冲序列对探测器的响应时间进行检测,结果表明a-CdSe薄膜对皮秒(10^-12秒)级的超短光脉冲作用具有良好的瞬态响应光电特性,探讨a-CdSe薄膜快速弛豫过程的内在机理。     

某类一阶非线性双曲型方程的Cauchy问题

本文考虑一类具实际物理背景的一阶非线性双曲型方程，证明了解的存在唯一及正则性。     

Measurement of small-signal and large-signal responses of packaged laser modules at high temperature

In this paper, the pulsed injection method is extended to measure the chip temperature of various packaged laser modules, such as the DFB laser modules, the FP laser modules, and the EML laser modules. An optimal injection condition is obtained by investigating the dependence of the lasing wavelength on the width and period of the injection pulse in a relatively wide temperature range. The small-signal frequency responses and large-signal performances of packaged laser modules at different chip temperature are measured. The adiabatic small-signal modulation characteristics of packaged LD are first extracted. In the large-signal measurement, the effects of chip temperature, bias current and driving signal on the performances of the laser modules are discussed. It has been found that the large-signal performances of the EML modules depend on the different red-shift speeds of the DFB and EAM sections as chip temperature varying, and the optimal characteristics may be achieved at higher temperature.     

双折射双频激光器偏振特性的分析

用激光原理和晶体光学原理分析了腔内加旋光晶体的激光器输出光的偏振特性，实验和分析表明，激光器输出两束不同频率的垂直线偏振光，激光器两端输出光的偏振面有一夹角ａ，且此夹角与晶轴和传光方向的夹角θ有关。理论计算结果在双折射双频激光器的实验结果符合很好。     

舒兰褐煤树脂组分中某些分离物的化学研究

我国褐煤资源丰富 ,分布于云南、吉林、黑龙江、山东和内蒙古等地。褐煤除作燃料和腐植肥料外 ,还应用于轻化工和机械工业 ,如从褐煤制取褐煤蜡。褐煤蜡中含有较多的树脂物质 ,影响了褐煤蜡的质量 ,因此通常褐煤蜡树脂作为废弃物脱除 ,以提高褐煤蜡的质量。褐煤蜡的化学组成为纯蜡和树脂 ,前者为高碳脂肪酸和脂肪醇的酯类、游离脂肪酸和脂肪醇 ,以及烃类物等 ;后者则以萜类为主 ,并含有甾醇、羟基酸和烃化合物[1～ 5] 。 1982年唐运千等采用红外光谱和氢核磁共振谱检定 ,褐煤树脂中含有 β 谷甾醇 ;柱层析和薄层层析检出雌二醇和雌酚酮[2 ] …     

气-固流化床反应器内双流体力学模型及其验证 Ⅱ.单组分两维射流床内流场特性分析

由以质量、动量和能量三大守恒定律为基础的湍流两相流理论出发,建立了描述气固流化床内两相流动的数学模型;在微型计算机上编写了相应的数值计算和图形处理程序;为了验证模型的可靠性,本文着手模拟与分析了单组分颗粒体系两维射流流化床内气、固相速度场、空隙度和压力场随时间、空间变化规律;得到了与前人实验结果相吻合的结论。