Control synthesis of isocyanate and alkoxy-silane terminated macromers

The kinetics of the reactions in bulk of 4,4′-dicyclohexyl methane diisocyanate (H₁₂ MDI) and 5-isocyanato-1,3,3-trimethylcyclohexylmethyl isocyanate or isophorone diisocyanate (IPDI) with benzylic alcohol (BZA) and α-hydroxy-ω-methyl ether-terminated polyethylene oxide PEO (M?_w = 350) were studied by size exclusion chromatography (SEC) and ¹³C nuclear magnetic resonance (¹³C-NMR). The substitution effect is exhibited in the case of H₁₂ MDI reactivity. The kinetic constants were calculated by a numerical method. The second-order kinetic mechanism was shown to be valid. In the IPDI case, the cycloaliphatic isocyanate group is shown to be more reactive than the aliphatic group in our conditions, without catalysis, in agreement with previous results from the literature, in our obtained by ¹H-and ¹³C-NMR without any catalyst. The reactivity ratio is found to be on the order of 3. This difference in reactivity of the two isocyanate groups is used for the control synthesis of isocyanate and alkoxy-silane-terminated macromers.     

A comparison of thermoreactive water-soluble poly-N,N-diethylacrylamide prepared by anionic and by group transfer polymerization

Several batches of poly-N,N-diethylacrylamide were synthesized by anionic and by group transfer polymerization (GTP). A radical poly-N,N-diethylacrylamide prepared from the same monomer was also included in the comparison. According to matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) both types of living polymerization resulted in narrow molecular weight distributions with M_w/M_n values below 1.5. Average molecular weights (M_n) between 888 and 4678 g/mol were calculated in these cases. The radical polymer had an average molecular weight (M_n) of approximately 130,000 g/mol. The dry anionic and GTP polymers were investigated by differential scanning calorimetry (DSC) and x-ray diffraction spectrometry. Evidence for partial crystallinity in the solid state was found. The conformation of all polymers was examined by high resolution (600 MHz) NMR. According to these measurements, 75% of the ? CHR? groups of the anionic poly-N,N-diethylacrylamide were located in an isotactic triade. The remaining 25% had heterotactic structure, while no indication for the presence of syndiotactic protons was found. Poly-N,N-diethylacrylamide prepared by GTP, on the other hand, had mainly syndiotactic structure. The aqueous solutions of the polymers showed phase separation upon heating. Whereas the lower critical solution temperature (LCST) was approximately 30°C in the case of the poly-N,N-diethylacrylamide prepared by GTP and by radical polymerization, uncommonly high LCSTs of more than 40°C were observed for the anionic poly-N,N-diethylacrylamide. © 1994 John Wiley & Sons, Inc.     

Topological Space of the Chemical Elements and its Properties

We carried out a mathematical study of 72 chemical elements taking advantage of the chemotopological method. We selected 128 properties to define the elements (physico-chemical, geochemical and chemical properties). Then, we looked for correlated properties and we reduced the number of them to 90. In this way we defined each element as a 90-tuple. Afterwards, we applied principal component analysis and cluster analysis (4 similarity functions and 5 grouping methodologies). Then, we calculated a consensus tree for the 20 dendrograms generated by the CA. Afterwards, we extracted the similarity relationships from the consensus tree and built up a basis for a topology on the set of chemical elements. Finally, we calculated some topological properties (closures, derived sets, boundaries, interiors and exteriors) of several subsets of chemical elements. We found that alkali metals, alkaline earth metals and noble gases appear not related to the rest of the elements. Also, we found that the boundary of non-metals are the semimetals with a stair-shape on the periodic table     

Stereoisomeric flavor compounds,part LVIII: The use of heptakis(2,3-di-O-methyl-6-O-tert-butyldimethylsilyl)-β-cyclodextrin as a chiral stationary phase in flavor analysis

The characteristics of the new chiral stationary phase heptakis(2,3-di-O-methyl-6-O-tert-butyldimethylsilyl)-β-cyclodextrin are outlined and compared with permethyl- and perethyl-β-cyclodextrins.     

PSRK: A Group Contribution Equation of State Based on UNIFAC

A group contribution equation of state called PSRK (Predictive Soave-Redlich-Kwong) which is based on the Soave-Redlich-Kwong equation (Soave, 1972) has been developed. It uses the UNIFAC method to calculate the mixture parameter a and includes all already existing UNIFAC parameters. This concept makes use of recent developments by Michelsen (1990b) and has the main advantage, that vapor-uquid-equilibria (VLB) can be predicted for a large number of systems without introducing new model parameters that must be fitted to experimental VLB-data. The PSRK equation of state can be used for VLB-predictions over a much larger temperature and pressure range than the UNIFAC γ--approach and is easily extended to mixtures containing supercritical compounds. Additional PSRK parameters, which allow the calculation of gas/gas and gas/alkane phase equilibria, are given in this paper. In addition to those mixtures covered by UNIFAC, phase equilibrium calculations may also include gases like CH₄ C₂H₆, C₃H₆, c₄H₁₀, CO₂, N₂, H₂ and CO.     

“线上线下-虚实结合”在有机化学实验教学中的应用探索——以正溴丁烷的制备实验为例

In response to the impact of the Covid-19 epidemic on organic chemistry laboratory teaching, this article analyzes and discusses the current limitation of traditional organic chemistry laboratory teaching. Taking the "preparation of n-bromobutane" as an example, a new "online-offline and virtual-actual combination" teaching mode with the combination of "Tencent Meeting, MLabs, laboratory and WeChat group" is introduced. The practice of the new mode of teaching includes the following steps: pre-class online guiding by teacher, student preview and practice based on the virtual simulation platform, students and teacher discussion and operation in laboratory, and post-classcomprehensive assessment and Q&A", and good teaching effects have been received. It is significant in cultivating and improving the independent innovation and practical ability, and provides reference for the organic chemistry laboratory teaching reform and also lays a foundation for the construction of "outstanding course" of organic chemistry.     

The use of the DPE radical polymerization method for the synthesis of chromophore-labelled polymers and block copolymers

Two analogues of diphenylethene carrying phenanthrene (1-(9-phenanthryl)-1-phenylethene (PPE)) and anthracene (1-(2-anthryl)-1-phenylethene (APE)) units were used in radical polymerization of styrene (St) and methyl methacrylate (MMA) at 80 °C using AIBN as initiator. Because of the nature of the polymerization, the resulting polymers possess the corresponding chromophoric groups. Using the methodology of a DPE system, these labelled polymers were further used for the synthesis of block copolymers. In this way poly(methyl methacrylate)-b-poly(styrene) and poly(methyl methacrylate)-b-poly(acrylonitrile) with molar masses of 60,000-90,000 g/mol were synthesized. Incorporation of the chromophoric groups into both homo- and block copolymers was confirmed by spectral measurements.     

The computation of the representation matrices of the generators of the unitary group

A method is presented for the efficient computation of the representation matrices of the unitary group, U(n) in the Gelfand—Tsetlin basis (corresponding to the usual spin-symmetry adapted basis for an N electron CI). The present scheme is conceptually and computationally attractive in that it is formulated directly in terms of Weyl tableaux and also that it permits simultaneous basis vector generation and matrix element evaluation. In addition the basis vectors are ordered so that subsequent restriction to the three dimensional rotation group is facilitated. An illustrative example is also presented.Taken in part from a thesis submitted to the University of London in partial fulfilment of the requirements for the degree of PhD.     

Implementation of a general multireference configuration interaction procedure with analytic gradients in a semiempirical context using the graphical unitary group approach

The graphical unitary group approach has been applied in an efficient implementation of a general multireference configuration interaction (MRCI) method for use with small active molecular orbital spaces in a semiempirical framework. Gradients can be computed analytically for molecular orbitals from a closed-shell or a half-electron open-shell Hartree-Fock calculation. CPU times for single point energy and gradient calculations are reported. The code allows MRCI geometry optimizations of large molecules, as illustrated for the singlet ground state and the four lowest triplet states of fullerene C(76).     

Rates of convergence of α-stable random motions

The rate-of-convergence problem in the central limit theorem is considered for -stable distributions on the noncommutative group of motions in ^d. The method used here is based on the theory of probability metrics.