Determination of Anionic Surfactants in Water

The use of ternary complexes in the determination of anionic surfactants has been investigated and an analytical method using linear alkyl sulfonates as a test substance has been developed. The method involves the formation of the chloroform-extractable bisphenanthroline Cu(II)-linear alkyl sulfonate (LAS) complex and the subsequent equilibration of the extract with erythrosine to form the extractable bisphenanthroline Cu(II)-erythrosine complex. In the equilibration step erythrosine displaces LAS quantitatively, allowing the determination of the LAS originally present by measuring the absorbance of the extracted bisphenanthroline-Cu(II)-erythrosine complex. Results are reported of studies made to determine the optimum analytical conditions, the sensitivity, and the precision for the method described.     

Chromatography of Uranium on High-Performance Ion Exchangers

Abstract

The potential of high-performance liquid chromatography (HPLC) for the determination of U(VI) in ground waters and urine has been examined under a variety of HPLC experimental conditions. Conventional cross-linked and bonded-phase ion exchangers, both cation and anion, were studied with aqueous mobile phases containing tartrate, citrate, or α-hydroxyisobutyrate. The best chromatography was obtained on bonded-phase cation exchangers with an α-hydroxyisobutyrate eluent. The metal ions were detected either by visible spectrophotometry after a post-column reaction with a complexing reagent, or with a polarographic detector. Dectection after post-column reaction gave the best sensitivity; the detection limit (2 × baseline noise was 6 ng or 60 ng.ml^?1 for 100 μl samples. In-line trace enrichment was used to decrease detection limits and linear calibration curves were observed in the ranges studied; 0.5 to 50 ng.mL^?1 for ground waters and 25 to 400 ng.mL^?1 for artificial urine.     

固态研磨-燃烧法制CuO-ZnO-ZrO2/HZSM-5二甲醚合成催化剂

以柠檬酸为燃烧剂,采用固态研磨-燃烧法和机械混合法制备了CuO-ZnO-ZrO2/HZSM-5CO2加氢一步合成二甲醚双功能催化剂.采用固定床反应器,在反应温度270℃、压力为3.0 MPa、空速4 200 h-1条件下,考察了催化剂对CO2加氢一步合成二甲醚的反应性能,并采用XRD、BET、H2-TPR、NH3-TPD及XPS对催化剂的结构进行了表征.评价结果表明:随柠檬酸量的增加,二甲醚选择性和收率呈峰形变化趋势;当柠檬酸的量等于化学计量比的100%时,制备的催化剂具有较好的催化性能:CO2单程转化率为24.8%、二甲醚(DME)的选择性和收率分别为35.3%和8.7%.表征结果表明:柠檬酸的量影响催化剂的比表面积、还原性能以及CuO和ZnO的晶粒尺寸等,进而影响催化剂反应性能.     

Ground state solution for differential equations with left and right fractional derivatives

In this work, we study the existence of positive solutions for a class of fractional differential equation given by (1) where . Using the mountain pass theorem and comparison argument, we prove that (1) at least has one nontrivial solution. Copyright © 2015 John Wiley & Sons, Ltd.     

Application of Octanohydroxamic Acid for Salting out Liquid–Liquid Extraction of Materials for Energy Storage in Supercapacitors

The ability to achieve high areal capacitance for oxide-based supercapacitor electrodes with high active mass loadings is critical for practical applications. This paper reports the feasibility of the fabrication of Mn₃O₄-multiwalled carbon nanotube (MWCNT) composites by the new salting-out method, which allows direct particle transfer from an aqueous synthesis medium to a 2-propanol suspension for the fabrication of advanced Mn₃O₄-MWCNT electrodes for supercapacitors. The electrodes show enhanced capacitive performance at high active mass loading due to reduced particle agglomeration and enhanced mixing of the Mn₃O₄ particles and conductive MWCNT additives. The strategy is based on the multifunctional properties of octanohydroxamic acid, which is used as a capping and dispersing agent for Mn₃O₄ synthesis and an extractor for particle transfer to the electrode processing medium. Electrochemical studies show that high areal capacitance is achieved at low electrode resistance. The electrodes with an active mass of 40.1 mg cm⁻² show a capacitance of 4.3 F cm⁻² at a scan rate of 2 mV s⁻¹. Electron microscopy studies reveal changes in electrode microstructure during charge-discharge cycling, which can explain the increase in capacitance. The salting-out method is promising for the development of advanced nanocomposites for energy storage in supercapacitors.     

自支撑硫镍基电极材料制备及其赝电容性能

硫镍基赝电容超级电容器具有较高的比电容和功率密度等优点,是下一代理想的储能装置之一,但其实际应用受到其活性材料的制约,如导电性低和循环性能差等。研究者围绕增强硫镍基赝电容电极材料导电性和提升循环稳定性进行了大量的研究工作。其中,构建自支撑的电极材料被认为是一种降低活性材料和集流体之间界面电阻的有效方法。本文综述了制备自支撑硫镍基赝电容电极的常见方法,并就活性材料的形貌与性能关系进行了总结,主要着眼于集流体改性、离子掺杂、复合材料构建及形貌调控优化等。最后对自支撑硫镍基赝电容电极材料的研究方向进行了展望。     

基于互连线电容耦合的SR锁存电路研究

通过对线间电容耦合模型的研究, 提出了一种基于互连线电容耦合的SR锁存电路设计方案. 该方案首先分析互连线间电容耦合关系, 利用MOS管栅极电容模拟互连线电容; 然后利用电容耦合结构与线计算特性, 设计或非逻辑门电路, 在此基础上实现基于互连线电容耦合的SR锁存电路; 最后在TSMC 65nm Spectre环境下仿真验证. 结果表明 所设计的电路逻辑功能正 确, 且具有低硬件开销特性.     

Variational theory for the ground state and collective excitations of an elongated dipolar condensate

We develop a variational theory for a dipolar condensate in an elongated(cigar shaped)confinement potential. Our formulation provides an effective one-dimensional extended meanfield theory for the ground state and its collective excitations. We apply our theory to investigate the properties of rotons in the system comparing the variational treatment to a full numerical solution. We consider the effect of quantum fluctuations on the scattering length at which the roton excitation softens to zero energy.     

Numerical approach for the evolution of spin-boson systems and its application to the Buck–Sukumar model

We study the evolution properties of spin-boson systems by a systematic numerical iteration approach, which performs well in the whole coupling regime. This approach evaluates a set of coefficients in the formal expression of the time-dependent Schr?dinger equation by expanding the initial state in Fock space. This set of coefficients is unique for the spin-boson Hamiltonian studied, allowing one to calculate the time evolution from different initial states. To complement our numerical calculations, we apply the method to the Buck–Sukumar model. We find that when the ground-state energy of the model is unbounded and no ground state exists in a certain parameter space, the time evolution of the physical quantities is naturally unstable.     

Structural and Thermodynamic Peculiarities of Core-Shell Particles at Fluid Interfaces from Triangular Lattice Models

A triangular lattice model for pattern formation by core-shell particles at fluid interfaces is introduced and studied for the particle to core diameter ratio equal to 3. Repulsion for overlapping shells and attraction at larger distances due to capillary forces are assumed. Ground states and thermodynamic properties are determined analytically and by Monte Carlo simulations for soft outer- and stiffer inner shells, with different decay rates of the interparticle repulsion. We find that thermodynamic properties are qualitatively the same for slow and for fast decay of the repulsive potential, but the ordered phases are stable for temperature ranges, depending strongly on the shape of the repulsive potential. More importantly, there are two types of patterns formed for fixed chemical potential—one for a slow and another one for a fast decay of the repulsion at small distances. In the first case, two different patterns—for example clusters or stripes—occur with the same probability for some range of the chemical potential. For a fixed concentration, an interface is formed between two ordered phases with the closest concentration, and the surface tension takes the same value for all stable interfaces. In the case of degeneracy, a stable interface cannot be formed for one out of four combinations of the coexisting phases, because of a larger surface tension. Our results show that by tuning the architecture of a thick polymeric shell, many different patterns can be obtained for a sufficiently low temperature.