Delayed feedback control experiments on some flexible structures

In recent decades,studies on delayed system dynamics have attracted increasing attention and advances have been achieved in stability,nonlinearity,delay identification, delay elimination and application.However,most of the existing work is on the theoretical basis and little is on the experiment.This paper presents our experimental studies on delayed feedback control conducted in recent years with the focus on the discussion of a DSP-based delayed experiment system.Some phenomena in our delay experiments are discussed and a few topics of interest for further research are brought forward.     

APPROXIMATE SOLUTIONS FOR TRANSIENT RESPONSE OF CONSTRAINED DAMPING LAMINATED CANTILEVER PLATE

The series composed by beam mode function is used to approximate the displacement function of constrained damping of laminated cantilever plates, and the transverse deformation of the plate on which a concentrated force is acted is calculated using the principle of virtual work.By solving Lagrange＇s equation, the frequencies and model loss factors of free vibration of the plate are obtained, then the transient response of constrained damping of laminated cantilever plate is obtained, when the concentrated force is withdrawn suddenly.The theoretical calculations are compared with the experimental data, the results show：both the frequencies and the response time of theoretical calculation and its variational law with the parameters of the damping layer are identical with experimental results.Also, the response time of steel cantilever plate, unconstrained damping cantilever plate and constrained damping cantilever plate are brought into comparison, which shows that the constrained damping structure can effectively suppress the vibration.     

对称性自发破缺所诱发的种子平行雷诺胁强

根据第二类气球模理论,在托卡马克中诸如不稳定漂移波类的环形局部模将在径向呈现源于环形性的对称性自发破缺。以流体离子温度梯度模模型方程为例,解出在准环坐标系中由对称性自发破缺产生的二维局部模本征模式。在略去边带效应后,它成为具有径向位移修正的平板模式。由位移修正离子温度梯度模式导出了种子平行雷诺胁强,而它在传统的(无位移修正的)平板模式下被证明为零。     

由三平行轴惯量求重心的一种方法

为了求得复杂刚体重心的位置, 根据转动惯量平行轴定理, 由已知轴转动惯量和一定的几何 关系推导出用于求重心的关系式, 从理论上给出两个可能重心坐标值, 再实际判断取舍.只要 用实验仪器先测量刚体对3个平行转轴的转动惯量, 就可由该关系式计算得到刚体重心的位 置. 这一方法有时要比直接测量重心更为简单.     

点阵增强型复合材料夹层结构的力学性能实验与分析

采用真空导入成型工艺,制备出在面板与芯材界面上具有创新构型的点阵增强型复合材料夹层结构。对其面板拉伸性能、夹层结构剪切与平压性能进行了实验研究,得出点阵增强型复合材料夹层结构经树脂柱增强后,剪切与平压性能均得以提高的结论。对不同跨高比复合材料夹层结构开展了三点与四点弯曲实验,研究其典型受力破坏形态与机理。基于Eshelby等效夹杂原理,采用Mori-Tanaka方法求解了点阵增强型复合材料夹层结构经树脂柱增强后的剪切性能。利用经典夹层梁理论和非线性有限元模拟方法,预估了试件抗弯刚度与受弯极限承载力,理论分析与实验结果较吻合。     

复杂厚板的条形传递函数解

建立了规则区域厚板混合状态变量的条形传递函数解,通过定义结点变量,并利用结点位移连续和力平衡条件,将多个简单子区域的解进行组装,从而得到了复杂形状,复杂边界条件厚板的条形传递函数解,由于条形传递函数法的节点位移变量与有限元法的节点位移变量完全一致,可将简单矩形板的条形传递函数解作为一个超东级单元,直拉将超级单元和有限元单元进行综合,可以得到复杂板的条形传递函数解,进一步增强了条形传递函数法对复杂反问题的适应性。     

利用变压器研究两个互感线圈的串并联

利用变压器研究了两个互感线圈串并联的等效电感。     

奇异线性方程组的并行多分裂迭代法

改进了奇异M-矩阵的线性方程组的并行多分裂法的一些最近结果,给出了并行多分裂迭代方法的一些收敛性的理论结果。     

平行三次形式的仿射超曲面

设Ａｎ 1是ｎ 1维仿射空间 ,Ｄ表示Ａｎ 1上的平坦联络 ,Ｍ是ｎ维光滑流形 ,ｘ:Ｍ→Ａｎ 1是一个非退化的仿射浸入 .对于Ｍ上的横截向量场ξ ,存在唯一的选择 ξ =1ｎ△ｘ(称为仿射法向量场 ) ,使得上述浸入是一个Ｂｌａｓｃｈｋｅ浸入 (见 [2 ]) .设 是此浸入由Ｄ在Ｍ上诱导的仿射联络 ,我们有 :ＤＸＹ= ＸＹ ｈ(Ｘ ,Ｙ) ξ　　　ＤＸξ=-ＳＸ这里Ｘ ,Ｙ ,Ｚ是Ｍ上的切向量场 ,ｈ是对称的双线性形式 ,由它可以定义Ｍ上的伪黎曼度量Ｇ(Ｇ =|Ｈ| - 1ｎ 2 ｈ ,Ｈ =ｄｅｔ(ｈｉｊ) ) ,称为Ｂｌａｓｃｈｋｅ度量 ,Ｓ称为Ｍ的形态算子 .若…     

Local and Parallel Finite Element Algorithms Based on Two-Grid Discretizations for Nonlinear Problems

In this paper, some local and parallel discretizations and adaptive finite element algorithms are proposed and analyzed for nonlinear elliptic boundary value problems in both two and three dimensions. The main technique is to use a standard finite element discretization on a coarse grid to approximate low frequencies and then to apply some linearized discretization on a fine grid to correct the resulted residual (which contains mostly high frequencies) by some local/parallel procedures. The theoretical tools for analyzing these methods are some local a priori and a posteriori error estimates for finite element solutions on general shape-regular grids that are also obtained in this paper.