两步相移实现投影栅相位测量轮廓术

提出一种新的投影栅相位测量方法--两步相移法。该方法只需两幅相移条纹图，因此计算量小，速度快。给出了实验及计算结果，并同四步相移法进行了比较，证明了该方法具有较高的精度。     

Surface profile measurement of low-frequency vibrating objects using temporal analysis of fringe pattern

A simple and accurate algorithm (phase scanning method) is proposed for 3D surface contouring and dynamic response determination of a vibrating object. A sinusoidal fringe pattern is projected onto a low-frequency vibrating object by a programmable liquid crystal display projector. The fringe patterns are captured by a high-speed CCD camera with a telecentric gauging lens. Phase values are evaluated point by point using phase scanning method. From the phase values of each point on the object, the contour of the specimen at different instants of vibration can be retrieved. In this paper, a small vibrating coin is used to demonstrate the validity of the method and the experimental results are compared with test results on a stationary coin using four-step phase shifting and fast Fourier transform methods. The technique is especially useful in applications where the vibrating object has a complicated shape.     

Computer-Generated Holograms Based on the Three-Dimensional Fourier Spectrum

A method to synthesize a computer-generated hologram (CGH) of real-existing objects from projection images is proposed. Different from other similar methods, our method enables the synthesis of a CGH with only one-dimensional (1-D) mechanical scanning of the objects. Our method is connected with the three-dimensional (3-D) Fourier spectrum of the objects by the 3-D central slice theorem (CST). Two efficient recording techniques for projection images and numerical experiments to verify our principle is discussed. A comparison between the two techniques is also presented from the viewpoint of diffraction efficiency. © 2005 The Optical Society of Japan     

加热炉热过程动态操作数学模型

根据加热炉生产特点,建立了钢坯加热过程的动态操作数学模型,分析了待轧时间变化时炉内钢坯温度分布情况。并针对加热炉待轧的灰色性,采用多目标灰色局势决策方法,得出了相应合理的待轧优化控制策略。模拟结果表明:该方法具有良好的动态性能,适合于在线控制。     

3D MRI of non-Gaussian (3)He gas diffusion in the rat lung

In (3)He magnetic resonance images of pulmonary air spaces, the confining architecture of the parenchymal tissue results in a non-Gaussian distribution of signal phase that non-exponentially attenuates image intensity as diffusion weighting is increased. Here, two approaches previously used for the analysis of non-Gaussian effects in the lung are compared and related using diffusion-weighted (3)He MR images of mechanically ventilated rats. One approach is model-based and was presented by Yablonskiy et al., while the other approach utilizes the second order decay contribution that is predicted from the cumulant expansion theorem. Total lung coverage is achieved using a hybrid 3D pulse sequence that combines conventional phase encoding with sparse radial sampling for efficient gas usage. This enables the acquisition of nine 3D images using a total of only approximately 1 L of hyperpolarized (3)He gas. Diffusion weighting ranges from 0 s/cm(2) to 40 s/cm(2). Results show that the non-Gaussian effects of (3)He gas diffusion in healthy rat lungs are directly attributed to the anisotropic geometry of lung microstructure as predicted by the Yablonskiy model, and that quantitative analysis over the entire lung can be reliably repeated in time-course studies of the same animal.     

低曝光量下投影算法的稳健性研究

研究了在低曝光量情况下灰度投影算法的稳健性,为提出的稳定成像系统的设计与实现提供可行性论证。通过合成视频实验探讨、实际视频实验论证相结合的研究方法,探讨曝光量不足对灰度投影算法性能的影响。实验结果表明,灰度投影算法在欠曝5档和存在一定随机噪声的情况下,仍能保持良好的运动矢量估计性能,从而说明了投影算法在一定的曝光量范围内仍能准确地得到运动矢量估计,是一种运算量小、实时性好且稳健性较强的电子稳像算法。投影算法在低曝光量情况下良好的稳像稳健特性,使其能在低亮度及高实时性要求等环境下应用于航拍、卫星遥感等稳定成像或高清晰成像场合。     

天空背景下飞行器结构特征提取的新方法

针对天空背景下低信噪比的飞行器,提出了一种基于SUSAN算法、灰色系统理论和数学形态学相结合的飞行器结构特征提取的新方法。在Visual C++6.0平台下,首先利用SUSAN算法从背景中提取飞行器的结构边缘信息,并与原图像相加实现目标增强;然后用灰色系统理论检测出飞行器的结构特征边缘;最后利用条件膨胀和重构算法,实现云层的抑制,并重构出飞行器目标。实验结果表明:该方法对于实现飞行器的跟踪、结构特征提取以及事后判读有重要的意义,同时验证了该方法的可行性。     

微型投影机光学引擎的研究

设计了一种针对个人用户使用的微型投影机光学引擎,系统为单片式数字光线处理器结构,采用红绿蓝三色大功率高亮度发光二极管作为光源,使用X棱镜作为合色元件,从而实现38.1～50.8 cm的彩色投影显示.对设计结果进行理论分析后可知,设计结果满足投影显示对颜色的要求,光学引擎的理论效率为16.1%.同时利用Light Tools仿真软件对系统进行建模分析,300万条光线追迹仿真的结果表明,光学引擎的效率为14.6%,与理论分析结果基本符合,屏幕上光通量为22.8 lm,其美国国家标准协会规定的九点照度均匀性达到91.55%和-93.36%,满足设计要求.     

中波红外景象投影光学系统消热差设计

针对红外成像系统性能测试与评估的应用需求,设计了一套基于数字微镜器件的消热差的中波红外景象投影光学系统.探讨了红外视景仿真用投影光学系统的像差特性和设计方法,并对投影系统的无热化进行了分析.采用分光板和补偿板方案,解决了大相对孔径条件下投影系统的远心照明分光和像差平衡问题,提高了分辨率和均匀性,增大了视场.系统由远心投...     

离轴三反红外双波段景象模拟器光学系统设计

 针对红外双波段成像系统性能测试与评估的应用需求,设计了3 μm～5 μm和8 μm～12 μm红外双波段视景仿真用离轴三反光学系统。在共轴三反光学系统成像理论基础上,分析了孔径光栏远离主镜的离轴三反系统像差特性,研究了大出瞳距、大相对孔径条件下离轴三反光学系统的结构设计和像差平衡方法。系统焦距为330 mm,F#为3,视场为6°×4.5°,出瞳距为750 mm,在空间频率10 lp/mm 处,中波红外MTF>0.65,长波红外MTF>0.4,接近衍射极限。具有大视场、大出瞳距、高分辨率、结构紧凑等特点。