Interfacial interaction in carbon fiber/thermoplastic composites

This work was undertaken in order to increase the understanding of the mechanism responsible for fiber/matrix interaction in carbon fiber/thermoplastic composite. From results of previous study on carbon fiber/PEEK composite, which suggested that the formation of the fiber/ matrix interaction was primarily related to a chemisorption mechanism, a study was done of the conditions required to obtain efficient fiber/matrix interaction in PA-12 and PP/carbon fiber composites. The interest in studying carbon fiber composite based on PP and PA-12 was that these two matrices are very different in terms of reactivity, polyamide having many more reactive groups than polypropylene. As expected, due to the non-reactive chemical structure of the polypropylene, fiber/matrix interaction in carbon fiber/PP composite occurred only when the matrix was thermally degraded, i.e. when the composite was molded at high temperature or under long residence time at the melt temperature. For the carbon fiber/PA-12 composite, strong fiber/matrix interaction occurred readily at relatively low molding temperature, i.e. well before thermal degradation of the matrix. It was also found that the short beam shear strength in these composites seems to evolve with molding temperature, and a maximum interfacial strength was observed at a molding temperature corresponding to the thermal degradation of the matrix. This indicates that although matrix degradation often results in strong reduction in the composite performance, some matrix degradation can be beneficial in terms of interfacial mechanical properties. Finally, this work demonstrated that while the formation of fiber/matrix interaction seems to be primarily related to a chemisorption mechanism, the contribution of interphase crystallinity to the interfacial strength is not negligible. In fact, interfacial crystallinity was found to be essential to ensure optimum interfacial strength.     

Rates of diffusion controlled reactions for one-dimensionally-moving species in 3D space

ABSTRACT

The asymmetry in diffusion dimensionality between self-interstitial atom (SIA) clusters and vacancies is a fundamental feature of irradiation damage in crystals, leading to a defect buildup imbalance that manifests itself as measurable dimensional and mechanical property changes. It is well known that, while vacancies and mobile vacancy clusters diffuse in a three-dimensional (3D) fashion, SIA clusters perform one-dimensional motion along mostly rectilinear trajectories. Despite this, a complete set of kinetic coefficients, including coagulation reaction rates and sink strengths, does not exist for 1D-moving objects. In this paper, we derive analytical expressions for these coefficients from continuum diffusion theory particularised to 1D motion. Moreover, we carry out kinetic Monte Carlo simulations of numerical replicas of the geometry of diffusing particles and sinks to validate the proposed solutions. Our simulations, which are conducted entirely independently from the analytical derivations, reveal excellent agreement with the proposed expressions, adding confidence to their validity. We compare the 1D and 3D cases and discuss their relevance for kinetic codes for damage accumulation calculations.     

Study on the Reinforcing Effect of Milled Carbon Fibers in a Natural Rubber Based Composite

Milled carbon fibers (MCF) have been tested at 2, 4, and 6 phr in a standard natural rubber compound with 45 phr of N375 carbon black. A dramatic increase in the low elongation moduli was observed even with only 2 phr of MCF. The presence of MCF confers anisotropic properties to the rubber compounds that can be measured by an anisotropic factor σ, defined as the ratio between the modulus parallel to the MCF prevalent direction over the modulus orthogonal to the MCF prevalent direction. It has been shown that the presence of MCF is able to reduce the mechanical hysteresis and also the compression set of the natural rubber compound. However, the tear strength properties are affected negatively. The present study demonstrates the feasibility and the advantages derived by the utilization of the carbon fibers as extra reinforcing filler in rubber compounds.     

An Investigation into the Migration of Segments in Crosslinked Fluorinated Polyimide Adhesive

Crosslinked fluorinated polyimides (CFPI) were successfully synthesized to study and explore the effect of cross-linkage on the migration of fluorinated segments and on the adhesion strength. Characterization by dynamic thermomechanical analysis (DMA) and thermo gravimetric analysis (TGA) confirmed good thermal properties of CFPI. X-ray photoelectron spectroscopy (XPS) results showed that the ratio of fluorinated component (6FDA-ODA) concentration of the surface to the bulk decreased with the crosslink density. The water contact angle of CFPI was lower than that of non-crosslinked fluorinated polyimide, indicating that the migration of fluorinated groups to the surface was reduced by the presence of cross-linkage. Therefore, CFPI, with no fluorine segregation on the surface, exhibited excellent wetting of adherent surfaces and adhesion strength, which was proved by lap shear strength (LSS) measurements and scanning electron microscopy.     

Fe XVII离子能级和振子强度的相对论多组态Dirac-Fock计算

本文用相对论多组态的狄拉克-福克(Dirac-Fock)(MCDF)近似方法计算了铁的类氖离子FeXVII的2p~53s,和3p和3d态的所有能级以及3s—3p,3p—3d跃迁的电偶极振子强度f值.理论计算的能级值同实验值的比较表明,使用MCDF方法计算类氖等电子序列的能级会得到与实验值符合得比较好的结果.因无实验数据可作比较,本文得到的振子强度值纯属理论预言值.     

CuZnAl记忆合金有序转变的固体电子论分析

应用固体经验电子理论,并联系 G.Inden 的有序转变温度与原子间作用能的关系式,计算了 CuZnAl 记忆合金的 A_2到 B_2,B_2到 DO_3两种有序转变温度随合金元素变化的规律。计算得出的变化趋势与实验结果符合得相当好,表明所采用的理论模型可以说明 CuZnAl 合金的记忆性能和用来指导探索新的记忆合金。     

硼原(离)子内壳激发高自旋态能级和辐射跃迁

采用Rayleigh-Ritz变分方法计算了B原子(离子)内壳层激发高自旋态(~(4,5,6)L,L=S,P)里德伯系列的能量和精细结构劈裂,利用截断变分方法改进非相对论能量,并利用一阶微扰理论计算了相对论能量修正和质量极化效应修正,利用屏蔽的类氢公式计算了量子电动力学效应和高阶相对论效应,从而得到了高精度的组态能量.利用精确计算的波函数,计算了这些高自旋态的电偶极辐射跃迁波长、振子强度和辐射跃迁概率.通过长度规范和速度规范计算的振子强度的一致性证明了本文计算的波函数是精确的.相比其他理论计算结果,本文计算的高自旋态的能级及跃迁波长数据与实验数据符合得更好.对于一些高位的内壳层激发高自旋态,相关的能级和跃迁数据为首次报道,本文的计算结果对相关实验光谱谱线标定具有重要意义.     

同位旋对用裂变截面探测鞍点前摩擦的影响

耦合了轻粒子发射的随机Langevin模型被用于计算三个Bi裂变系统因核耗散效应引起的相对于标准统计模型预计的裂变截面值的变化,σ_fdrop作为激发能的函数。发现209Bi的σ_fdrop要大于202Bi和195Bi的σ_fdrop,这表明高同位旋系统209Bi的裂变截面对摩擦强度有更大的敏感性。该结果建议,当实验上使用裂变激发函数来更精确地提取鞍点前摩擦强度时,应产生具有高同位旋的复合核。进而,通过Langevin计算拟合p+206Pb和p+209Bi反应的裂变激发函数数据,提取的鞍点前摩擦强度为（3~5）×1021 s-1。Langevin models that are coupled with particle emission are applied to calculate the drop of fission cross section caused by friction over its standard statistical-model value, σ_fdrop, as a function of excitation energy for three Bi nuclei with different isospins. We find that σ_fdrop become larger for 209Bi than for 202Bi and 195Bi, indicating a greater sensitivity of fission cross section to friction for high-isospin 209Bi. These results suggest that, to more accurately determine the presaddle dissipation strength by measuring fission excitation functions, it is best to populate those compound systems with a high isospin. Furthermore, we analyze the data of fission excitation functions measured in p + 209Bi and p + 208Pb reactions, which yield high-isospin 210Po and 209Bi systems, and extract a presaddle friction strength of (3-5)×1021 s-1 by comparing Langevin simulations with these experimental data.     

纳米Ni在77 K温度下压缩行为的研究

利用低温力学测试系统研究了电化学沉积纳米Ni在77 K温度下的压缩行为. 室温下纳米Ni 的屈服强度为 2.0 GPa, 77 K温度下的屈服强度为3.0 GPa, 压缩变形量则由室温的10%左右下降到5%. 借助应变速率敏感指数、激活体积、扫描电子显微和高分辨透射电子显微分析, 对纳米Ni的塑性变形机制进行了表征. 研究表明, 在77 K温度下的塑性变形主要是由晶界-位错协调变形主导, 晶界本征位错弓出后无阻碍地在晶粒内无位错区运动, 直至在相对晶界发生类似切割林位错行为. 同时分析了弓出位错的残留位错部分在协调塑性变形时起到的增加应变相容性和减小应力集中的作用. 利用晶界-位错协调机制和残留位错运动与温度及缺陷的相关性揭示了纳米Ni室温和77 K温度压缩性能差异的内在原因. 关键词： 塑性变形 强度 位错