A way of establishing quality of measurements in gas analysis—national and international aspects

Standardising quality of measurements at both the national and international level results in a unity in measurement that may be regarded a synonym of traceability. In gas analysis, the key issue in achieving this aim is production of gaseous reference materials. Establishing a network of secondary measurement standards at gaseous CRM producers’ sites in Ukraine might be interesting for those involved in gas analysis activities. Inevitably, problems concerning the recognition of measuring capabilities of both national metrological institutes and local CRM producers are now an international issue. Thus, the problems of national adoption of international standards, as well as harmonisation between different international documents are currently relevant, and Ukrainian experience may be useful to others in this field. Presented at the 3rd International Conference on Metrology, November 2006, Tel Aviv, Israel.     

Thermodynamic and spectroscopic properties of 2-pyrrolidinones. 2. Dielectric properties of 2-pyrrolidinone in binary mixtures

Dielectric permittivities of 2-pyrrolidinone - acetone, -dimethyl sulfoxide,-2-propanol, -dichloromethane and -water systems were measured as a function of mole fraction over the whole composition range at 30 and 50°C. The excess dielectric permittivities are predominantly negative for all the mixtures and the excess molar polarizations are negative except for 2-pyrrolidinone - water and 2-pyrrolidinone - dimethyl sulfoxide mixtures. The large negative excess quantities are indicative of the strong specific interactions between the like and unlike components of the solution mixtures.     

Molecular interactions in 1-pentanol +2-methyl-2-butanol mixtures: Static dielectric constant,viscosity and refractive index investigations at 5, 25 and 45°C

Static dielectric constants, refractive indices and viscosities of 1-pentanol +2-methyl-2-butanol mixtures were measured at 5, 25 and 45°C. The results show that the mixing of the two isomers modifies the polarizability and the resistence of viscous flow of the system depending on the composition and temperature. Short range intermolecular interactions producing hetero-alcohol open dimers are considered.     

Liquids and liquid mixtures: Deduction of the BGY equation considering the angular distribution function

The Born→Green→Yvon equation for molecular fluid has been deduced considering the orientational distribution functions. The isotropic and anisotropic parts of the distribution function have been separated. The expressions deduced can be used in the case of mixtures and for the non-central type of intermolecular potential energy.     

Making the liquid-phase catalytic hydrodechlorination of pce over Pd/C safer

Summary The hydrodechlorination of tetrachloroethylene in methanol (MeOH) over palladium catalysts on activated carbon (Pd/C) at 20°C and atmospheric pressure was rendered safer by using ethanol (EtOH), isopropanol (IPA) or water-alcohol mixtures as solvents. Adding water to MeOH was better than using EtOH or IPA since it resulted in a faster reaction and better stability of Pd/C, which could also be completely reactivated.     

Solubility of benzil in binary alkane + dibutyl ether solvent mixtures. Comparison of predictive expressions derived from the nearly ideal binary solvent model

Experimental solubilities are reported for benzil dissolved in six binary mixtures containing dibutyl ether with hexane, heptane, octane, cyclohexane, methylcyclohexane, and 2,2,4-trimethylpentane at 25°C. Results of these measurements are compared to the predictions of equations developed previously for solubility in systems of nonspecific interactions. The most successful equation in terms of goodness of fit involved a volume fraction average of the excess Gibbs energies relative to the Flory-Huggins model, and predicted the experimental solubilities in the six systems studied to within an overall average absolute deviation of 3.4% and with a maximum deviation of 6.0%.     

Liquid chromatography of polymer mixtures by a combination of exclusion and full adsorption mechanisms. Three- and four-component polymer blends

Summary Coupling of full adsorption-desorption and size-exclusion chromatography (FAD-SEC) has been applied to the separation and molecular characterization of three- and four-component polymer blends. The method is based on the full adsorption of alln orn−1 components of the polymer blend in a specially designed FAD minicolumn. By appropriate eluent switching the adsorbed polymers are desorbed stepwise from the FAD minicolumn into an on-line SEC column for molecular characterization. It is shown that the desorption isotherms of particular blend components give valuable information about the appropriate displacer composition. The exact position of the desorption isotherms depends, however, both on the amount of polymer adsorbed and in the presence of other, chemically different, polymers within FAD column. The nature and composition of the displacer must, therfore, be adjusted if the intervals between the desorption of particular blend components are to be large enough to prevent displacement overlap. Presented at: Balaton Symposium on High-Performance Separation Methods, Siófok, Hungary, September 3–5, 1997.     

Molar excess heat capacities and volumes for mixtures of alkanoates with cyclohexane at 25°C

Molar excess volumes V ^E at 25°C have been determined by vibrating-tube densimetry, as a function of mole fraction x for different series of an alkanoate (H _2m+1 C _m COOC _n H _2n+1 )+cyclohexane. Three types of alkanoates were investigated, i.e., methanoates (m=0, with n=3 and 4), ethanoates (m=1, with n=2, 3, and 4) and propanoates (m=2, with n=1, 2, and 3). In addition, a Picker flow calorimeter was used to obtain molar excess heat capacities C _p ^E at constant pressure at the same temperature. V ^E is positive for all systems and rather symmetric, with V ^E (x=0.5) amounting to almost identical values in a series of mixtures containing an alkanoate isomer of same formula (say C₄H₈O₂, C₅H₁₀O₂, or C₆H₁₂O₂). The composition dependence of C _p ^E is rather unusual in that two more or less marked minima are observed for most of the mixtures, especially when the alkanoate is a methanoate or an ethanoate. These results are discussed in terms of possible changes in conformation of both the ester and cyclohexane.     

Viscosity of mixtures of polymers and microemulsions — the Huggins interaction coefficient

Microemulsions used in enhanced oil recovery are usually used in conjunction with a polymer solution that provides mobility control by reducing the permeability of the formation and/or increasing the viscosity of the injected fluid. Microemulsions, which are mixtures of at least four components — water, oil, surfactant and cosurfactant (and, usually, inorganic salts) are complex even in the absence of polymer and consequently, studies of their phenomenon tend to be phenomenological. An approach found to be useful to circumvent this has been to consider the microemulsion particles dispersed in their external phase to be macromolecules which retain their integrity when diluted with external phase or when mixed with polymers. Thus the dispersed phase components are treated as a pseudocomponent. If this approach is followed, many features of the phase diagram of polymer-microemulsion mixtures can be rationalized. It is therefore of some interest to determine whether a similar approach can be used to understand or predict the viscosity of mixtures in which a simple mixing rule for viscosities can be utilized to gain further insight into the polymer-microemulsion interaction.     

Excess molar volumes and excess viscosities for then-hexane+dichloromethane+tetrahydrofuran ternary system at 25°C

Exces molar volumes, and excess viscosities of then-hexane+dichloromethane+tetrahydrofuran system have been determined at 25°C by measuring densities and viscosities. Different expressions exist in the literature to predict these excess properties from binary data. The empirical correlation of Cibulka is shown to be the best in this system.