Halomethanes in tri-n-octylamine and squalane mixtures at infinite dilution

The retention behavior of eight halomethanes and four saturated hydrocarbons was measured in gas chromatographic stationary phases consisting in tri-n-octylamine (TOA), squalane (SQ) and six TOA+SQ mixtures, at 55.0, 58.5, 62.5 and 65.0°C. Equlibrium constants for complex formation were extracted from experimental data by using a lattice model developed by Martire. The results may be interpreted in terms of the formation of weak hydrogen-bonded complexes, with sociation constants of about 0.13 L-mol^–1 for haloforms and 0.07 L-mol^–1 for dihalomethanes at 60°C.     

Volume and heat capacity of model non-aqueous self-assembly systems

Blends of immiscible polymers are often stabilized by block copolymers which can form non-aqueous micelles and microemulsions in the liquid polymers. The phase diagrans, apparent volumes and apparent heat capacities of model non-aqueous binary and ternary systems were studied in order to investigate the conditions under which such self-assembly systems could form. 1,2-Hexanediol, which can cosolubilize hexane and ethyleneglycol, forms inverse micelles in hexane and weak microaggregates in ethyleneglycol. Genapol X-060, a commercial alcoholic surfactant containing on the average an aliphatic chain of 13 carbons and 6 oxyethylenes (C₁₃E₆), forms microaggregates in poly(ethyleneglycol) 400. These self-assembly systems are strengthen in the presence of a third component which has an affinity for the inner phase.Presented at the Symposium, 76^th CSC Congress, Sherbrooke, Quebec, May 30–June 3, 1993, honoring Professor Donald Patterson on the occasion of his 65^th birthday.     

Densities and excess molar volumes for binary mixtures of N,N-dimethylformamide+ 1,2-dimethoxyethane

Densities are reported for N,N-dimethylformamide and 1,2-dimethoxyethane binary mixtures at different mole fractions covering the whole miscibility range and at 19 temperatures ranging from –10 to 80°C. The experimental density data have been fitted by empirical relations and the excess volumes by a Redlich-Kister equation. The 11 N,N-dimethylformamide and 1,2-dimethoxyethane adduct appears to be stable throughout the temperature range. A comparison with other DMF containing mixtures is made.     

Capillary gas chromatography of pesticide residues in foods: Application of a split/splitless inlet system

Residue mixtures of pesticides in foods which were difficult to separate by packed-column gas chromatography were determined by capillary gas chromatography and electron capture detection. Manual injections of sample and reference standard were made with a 10 μL syringe on a septum-enclosed, split/ splitless inlet system. Optimal peak height repeatability (± 3%( was achieved with three-μL injections which were made within time periods of four hours or less. The average linearity coefficient (slope( obtained for detector response as a function of solution concentration was 1.1.     

Conductometric study of Bu4NClO4 in propylene carbonate-acetonitrile and propylene carbonate-toluene mixtures at 25°C

Conductometric measurements of tetrabutylammonium perchlorate in propylene carbonate-acetonitrile and propylene carbonate-toluene mixtures at 25°C are reported. Limiting molar conductances, association constants and distance of closest approach of ions are calculated. The experimental data were analyzed by means of the Lee-Wheaton equation. The Gilkerson's solvent-solute interaction energy term was calculated from a plot of association constant logarithmvs. reciprocal dielectric constant.     

Adsorption from Ternary Liquid Mixtures on Partially Dehydroxylated Silica Gel

The formation of mixed adsorbed layers has been tested for ternary mixtures containing a specifically adsorbed component—acetone and binary solvent benzene +n-hepane. The specific excess adsorption isotherms from the liquid phase were measured on silica gel samples partially dehydroxylated. The competition of liquid components for silica surface is discussed on the basis of changes in the mixed solvent composition.     

Properties of polymer blends and triblock copolymers obtained by neutron scattering

Static and dynamic scattering properties of polymer blends and block copolymers are examined within the random phase approximation (RPA). A self-consistent theoretical scheme for a simultaneous analysis of elastic and quasielastic scattering data is presented. The case of a triblock copolymer made of an ordinary central block and two deuterated lateral blocks in a matrix of deuterated homopolymers is considered in detail. The theoretical predictions of the RPA are compared with the experimental data obtained by elastic neutron scattering experiments using mixtures of deuterated poly(dimethylsiloxane) homopolymers and copolymers made of three blocks of approximately equal sizes. The lateral blocks are deuterated poly(dimethylsiloxane) and the central one is an ordinary poly(dimethylsiloxane). A good agreement is found in the whole range of wavevectors covered by the experiments. An extension of the RPA to the analysis of the dynamical scattering data for the same systems is put forward. It is shown how the time relaxations of the bare response functions obtained from the single chain dynamics are used to extract the intermediate scattering function characterizing the system of interacting chains. © 1996 John Wiley & Sons, Inc.     

Molecular surfaces: An advantageous starting point for the description of composition‐dependent viscosities applied to polymer solutions

The viscosity of polymer/solvent systems is modeled as a function of composition under the premises that the dissipation of energy is taking place at the molecular interfaces and that the friction between solvent and solute varies with composition due to a change in the flow mechanism (drainage of coils). The simple expression obtained in this manner contains three system‐specific parameters: a geometric factor γ, which accounts for the differences of the surface to volume ratios of the components; a hydrodynamic parameter α, which measures the friction between solute and solvent in the case of fully draining polymer coils; and β, which corrects for changes in the friction between unlike molecules resulting from collective motions owing to limited draining. Experimental data published for 12 poly(dimethylsiloxane)/pentamer mixtures can be represented quantitatively by this relation; moreover the knowledge of the three system‐specific parameters permits the calculation of intrinsic viscosities, and the molecular weight dependencies of γ and α yield the entangle molecular weight of the polymer. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 2221–2228, 1999     

Adsorption from ternary liquid mixtures on silica gel and aluminium oxide

Formation of mixed adsorbed layers was tested for ternary liquid mixtures containing methanol or acetone and the binary solvent benzene+n — heptane. The specific excess adsorption isotherms from the liquid phase were measured on silica gel, silanized silica gel and aluminium oxide. The experimental adsorption data are discussed on the basis of the changes in the mixed solvent composition.     

Solubility of benzil in binary alkane + dibutyl ether solvent mixtures. Comparison of predictive expressions derived from the nearly ideal binary solvent model

Experimental solubilities are reported for benzil dissolved in six binary mixtures containing dibutyl ether with hexane, heptane, octane, cyclohexane, methylcyclohexane, and 2,2,4-trimethylpentane at 25°C. Results of these measurements are compared to the predictions of equations developed previously for solubility in systems of nonspecific interactions. The most successful equation in terms of goodness of fit involved a volume fraction average of the excess Gibbs energies relative to the Flory-Huggins model, and predicted the experimental solubilities in the six systems studied to within an overall average absolute deviation of 3.4% and with a maximum deviation of 6.0%.