Stability of aqueous foam films and foams containing polymers: Discrepancies between different length scales

Polymer-stabilized foams and foam films have received considerable attention during the past years. This review paper gives an overview of recent studies dealing with polyelectrolyte/surfactant mixtures, proteins, and microgels adsorbed at single air/water interfaces, in foam films and in macroscopic foams. These polymeric systems have in common that their structure or shape changes when adsorbing at an air/water interface. These structural changes in comparison to their bulk behavior greatly influence the properties of foam films and foams. Regarding the foam stability, formation of adsorbed layers or aggregates plays an important role. The discrepancy between stabilization of macroscopic foams and destabilization of single foam films might be attributed to the blockage of Plateau borders and, therefore, slowed down drainage. Another important parameter is the interfacial viscoelasticity.     

Ionothermal Synthesis of Imide‐Linked Covalent Organic Frameworks

Covalent organic frameworks (COFs) are an extensively studied class of porous materials, which distinguish themselves from other porous polymers in their crystallinity and high degree of modularity, enabling a wide range of applications. COFs are most commonly synthesized solvothermally, which is often a time‐consuming process and restricted to well‐soluble precursor molecules. Synthesis of polyimide‐linked COFs (PI‐COFs) is further complicated by the poor reversibility of the ring‐closing reaction under solvothermal conditions. Herein, we report the ionothermal synthesis of crystalline and porous PI‐COFs in zinc chloride and eutectic salt mixtures. This synthesis does not require soluble precursors and the reaction time is significantly reduced as compared to standard solvothermal synthesis methods. In addition to applying the synthesis to previously reported imide COFs, a new perylene‐based COF was also synthesized, which could not be obtained by the classical solvothermal route. In situ high‐temperature XRPD analysis hints to the formation of precursor–salt adducts as crystalline intermediates, which then react with each other to form the COF.     

电吸附技术的应用与研究

本文综述了活性炭、活性炭纤维、炭气凝胶及活性氧化铝等材料的电吸附/脱附技术的研究进展。主要介绍了其在去除水中无机和有机污染物方面的应用,并对今后的研究方向提出了建议。     

Properties of polymer blends and triblock copolymers obtained by neutron scattering

Static and dynamic scattering properties of polymer blends and block copolymers are examined within the random phase approximation (RPA). A self-consistent theoretical scheme for a simultaneous analysis of elastic and quasielastic scattering data is presented. The case of a triblock copolymer made of an ordinary central block and two deuterated lateral blocks in a matrix of deuterated homopolymers is considered in detail. The theoretical predictions of the RPA are compared with the experimental data obtained by elastic neutron scattering experiments using mixtures of deuterated poly(dimethylsiloxane) homopolymers and copolymers made of three blocks of approximately equal sizes. The lateral blocks are deuterated poly(dimethylsiloxane) and the central one is an ordinary poly(dimethylsiloxane). A good agreement is found in the whole range of wavevectors covered by the experiments. An extension of the RPA to the analysis of the dynamical scattering data for the same systems is put forward. It is shown how the time relaxations of the bare response functions obtained from the single chain dynamics are used to extract the intermediate scattering function characterizing the system of interacting chains. © 1996 John Wiley & Sons, Inc.     

颗粒毛细效应影响因素的离散元分析

颗粒毛细效应是指将一根细管插入填充有颗粒物质的容器中并对管施加竖直振动时颗粒在管内上升并最终达到一个稳定的高度的现象, 该现象为颗粒物料的逆重力输运提供了一种潜在的技术途径. 为探究颗粒毛细效应的影响因素, 采用离散元方法, 模拟再现了颗粒毛细效应过程,展示了不同管径下颗粒竖直方向速度演变特性, 考察了不同容器宽度和振动条件下颗粒最终毛细上升高度随管径的演变规律. 结果表明, 在容器宽度与粒径比为40、管振幅与粒径比为14.33、管振动频率为12 Hz情况下, 管径与粒径比$D/d = 3.33$时, 管内颗粒堵塞严重, 使得颗粒上升缓慢,并造成颗粒柱中断; $D/d = 8.33$时, 起初毛细上升高度增加迅速, 随后毛细上升高度的增大逐渐减缓, 管内颗粒在管径方向几乎不存在速度梯度; $D/d =15$时, 随着颗粒毛细上升高度的增大, 管内颗粒柱分离为速度截然不同的两层, 上层颗粒在管径方向几乎不存在速度梯度, 而下层颗粒存在明显的速度梯度.研究还发现, 在毛细效应能够发生的管径范围内, 存在一个对应于颗粒最终毛细上升高度最大值的临界管径, 当管径小于临界管径时, 颗粒最终毛细上升高度随管径的增大而增大, 当管径大于临界管径时, 颗粒最终毛细上升高度随管径的增大而趋于减小; 增大容器宽度,临界管径有所增大; 增大振幅、适当提高频率能够有效促进临界管径的增大.      

Estimation of the Nitta-Chao Parameters for the ether-group. Ether + n-alkane mixtures

In this work we have estimated the structural and interactional parameters of the ether- group for the group-contribution model of Nitta-Chao using a extensive experimental database of thermodynamic properties of ethers (monoethers, polyethers and acetals) and ether + n-alkane and ether + ether mixtures. The results obtained by Nitta-Chao model with this parameters get closer to the experimental values than those obtained with parameters of Eckart et al. (1986). The thermodynamic properties obtained by the Nitta-Chao model with old and new parameters were compared to predictions by other models such as Flory (1965) theory, DISQUAC (Kehiaian, 1977) model and UNIFAC model (versions of Dang and Tassios, 1986, and Larsen et al., 1987).     

Thermodynamic properties of aqueous mixtures of LiCl and Li2SO4 at different temperatures

Emf measurements were made on the cell without liquid junction: Li?ISE LiCl(m₁), Li₂SO₄(m₂) Ag/AgCl. The performances of the electrode pairs constructed in our laboratory were tested and exhibited near-Nernstian behavior. The mean activity coefficients of LiCl for the system Li⁺?Cl^??SO ₄ ^2? ?H₂O have been investigated by the emf values at temperatures of 0, 15, 35°C and constant total ionic strengths of 0.05, 0.1, 0.5, 1.0, 2.0, 3.0 and 5.0 mol·kg^?1. The activity coefficients decrease with increasing temperature and the ionic strength fraction of Li₂SO₄ in the mixtures. The thermodynamic properties are interpreted by use of Harned's empirical equations and Pitzer's ion interaction approach including the contribution of higher order electrostatic terms. The experimental results obey Harned's rule and are described by using Pitzer equations satisfactorily. The activity coefficients of Li₂SO₄, the osmotic coefficients and the excess free energies of mixing for the system in the experimental temperature range were reported.     

Effect of the nature of the support for copper-cerium oxide catalysts on selective oxidation of CO in hydrogen-rich mixtures

We have studied the catalytic properties of copper-cerium oxide catalysts, supported on zirconium, aluminum, titanium, and manganese oxides, in the reaction of selective oxidation of CO in hydrogen-rich mixtures. We have shown that the high activity and selectivity of catalysts supported on zirconium and aluminum oxides is connected with the presence of (in addition to divalent copper) higher amounts of copper in the (+1) oxidation state in the catalysts. __________ Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 42, No. 2, pp. 119–124, March–April, 2006.     

Determining the cytotoxicity of catanionic surfactant mixtures on HeLa cells

The cytotoxicity of commonly used synthetic surfactants and catanionic mixtures of those was evaluated using MTT on HeLa cells. The 50% inhibition concentration (IC₅₀) for MTT reduction was calculated. The effect on chain length increase and inclusion of polyoxyethylene groups on the toxicity was tested on single surfactant systems. A general trend of increasing toxicity with increasing chain length and the presence of polyoxyethylene groups was observed. The measured IC₅₀ values of catanionic systems lie between those of participating surfactants. The increase in toxicity as the cationic surfactant is added to the anionic one is however not linear. A steep decrease of the IC₅₀ values (and therefore increase in the toxic properties) is observed immediately already at low concentrations of the cationic surfactants. This behavior is analogous to the enzyme activity in catanionic microemulsions.     

Copper(I) halide complexes with 2,2′-bis(diphenylphosphano)-1,1′-binaphthyl (rac-binap) and heterocyclic thiones. Racemic compounds in chiral and achiral crystal space groups

Reactions of copper(I) halides with racemic 2,2′-bis(diphenylphosphano)-1,1′-binaphthyl (rac-binap) in 1:1 molar ratio afforded mononuclear complexes of the type [CuX(rac-binap)] (X = Cl, Br, I) which, on further treatment with 1 equiv. of pyridine-2-thione (py2SH), pyrimidine-2-thione (pymtH) or 4,6-dimethyl-pyrimidine-2-thione (dmpymtH) gave rise to the formation of mixed-ligand complexes of the formula [CuX(rac-binap)(thione)]. The molecular structures of [CuBr(rac-binap)(py2SH)] · 2CH₂Cl₂, [CuBr(rac-binap)(py2SH)] · CH₂Cl₂ and [CuBr(rac-binap)(dmpymtH)] · CH₂Cl₂ have been established by single-crystal X-ray diffraction. Each of the complexes features a distorted tetrahedral copper(I) center with the phosphane acting in a chelating fashion. The complexes are strongly luminescent in the solid state at ambient temperature. Unusually, the [CuBr(rac-binap)(py2SH)] · 2CH₂Cl₂ molecules crystallise in a chiral space group with independent S- and R-enantiomers in the asymmetric unit.