抛物面型X射线组合折射透镜聚焦性能的理论与实验研究

结合衍射理论和矩阵光学方法得出抛物面型X射线组合折射透镜的光学性能指标(包括其焦距的严格表达式、薄透镜近似的判定准则、透过率和有效孔径,以及极限聚焦光斑尺寸等).采用X射线深度光刻技术实际制作了PMMA材料抛物面型X射线组合折射透镜并给出了工艺测试结果.最后在北京同步辐射装置(BSRF)上,实际构建了基于3种不同结构参数的PMMA材料抛物面型X射线组合折射透镜的微束聚焦实验系统.并实际测试了其聚焦性能,均获得了良好的聚焦效果,给出实测结果并对实测结果进行了分析和讨论.     

诺莫图法在薄透镜和球面镜成像分析中的应用

在满足近轴光线的条件下,可以利用成像公式和光路图法分析薄透镜或球面镜的物像关系,而本文介绍的这种诺莫图法,可以在直角坐标系上用坐标图示法分析薄透镜和球面镜的物像关系,不仅可以精确求得实物或虚物的成像位置,还可以判断出像的性质,具有简单、直观等特点,可以作为分析物像关系的一种补充手段.     

用于光纤熔接系统的纤芯检测镜头设计

光纤已广泛应用于当今社会的信息传输领域。为了满足长距离光纤传输中高质量光纤熔接的需要,介绍了一个应用于光纤熔接系统的透射光纤纤芯检测系统。该系统中的核心器件是一组能对光纤纤芯成像的特殊镜头。借助于ZEMAX软件,设计了这组检测镜头。该镜头具有8倍放大倍率、长工作距离、短结构、高精度等特点。论述了镜头的设计方案和设计过程,并给出了满足要求的设计结果。通过在LightTools软件中对整个系统检测结果的模拟,证明了该设计的可行性。     

基于Zemax的He-Ne激光光束聚焦物镜的设计

 为了得到一个合理的He-Ne激光光束聚焦物镜,采用以正前凸型为基础的高折射率双片结构,应用Zemax软件进行优化设计,获得了弥散斑直径为0.002mm的He-Ne激光聚焦物镜,该镜头只需校正轴上点球差。实验结果表明：设计的镜头比低折射率单片透镜得到的弥散圆直径更小,达到0.0019mm,球差被控制在-0.05mm～+0.05mm范围内,MTF曲线所围面积变大,中心点亮度增高,符合实际需要。     

124 W diode-side-pumped Nd:YAG laser in dynamic fundamental mode

A high power dynamic fundamental mode Nd:YAG laser is experimentally demonstrated with a stagger-pumped laser module and a V-shaped resonator. The rod is pumped symmetrically by staggered bar modules. And dynamic fundamental mode is achieved under different pump levels. The maximal continuous wave (CW) output of 124 W (M²=1.4) is achieved with a dual rod. Average output of 112 W, pulse width of 120 ns, pulse energy of 11.2 mJ and peak power of 93 kW are obtained in Q-switched operation of 10 kHz.     

Changes in the intensity distribution and polarization of non-uniformly polarized beams focused by a spherically aberrated lens with annular aperture

Based on the generalized Huygens-Fresnel diffraction integral and beam coherence polarization (BCP) matrix formulation, the focusing properties of a type of non-uniformly polarized (NUP) beam through a spherical aberrated lens with annular aperture are studied. The dependence of focal shift, intensity distribution, power in the bucket (PIB) and degree of polarization on the spherical aberration coefficient, obscure ratio and polarization parameters is illustrated numerically. The focusing of NUP beams by a spherically aberrated lens with circular aperture is treated as a special case, where the inner radius of the aperture is equal to zero.     

Design of aspheric collimation system for semiconductor laser beam

In this paper, semiconductor laser beam collimation lenses system has been optimum simulated and designed. The new design methods for aspheric cylinder lenses collimation system have been discussed in detail and the system parameters are calculated and optimized by using a geometrical ray optics approximation. The optical system has been further simulated by software MATLAB, and the simulation results showed that the emergence angle can be collimated effectively, and the output beam can be expanded to a circular spot in centimeter level beam radius.     

Optical design for enhanced prism type fingerprint scanner image contrast with asymmetrical aspheric lens

The design of optical prism fingerprint scanner with aspheric lens is researched. We propose a modified structure for optical prism fingerprint scanner, which has an asymmetrical aspheric lens on the output plane. It is numerically shown under elliptic valley similar fingerprint model that the optical image qualities of such a scanner are better than the scanner with symmetrical aspheric lens. When the fingerprint range is 15 mm, the results show that the minimum image contrast is 0.49 for an optical prism with asymmetrical aspheric lens, much better than a symmetrical aspheric lens with 0.20. The relative illumination variation is from 0.62 to 1.00 for optical prism with asymmetrical aspheric lens, and for the symmetrical aspheric lens it is 0.35 to 1.00. We conclude that an optical prism with asymmetrical aspheric lens is better than an optical prism with symmetrical aspheric lens.     

Modification of hydrophobic acrylic intraocular lens with poly(ethylene glycol) by atmospheric pressure glow discharge: A facile approach

To improve the anterior surface biocompatibility of hydrophobic acrylic intraocular lens (IOL) in a convenient and continuous way, poly(ethylene glycol)s (PEGs) were immobilized by atmospheric pressure glow discharge (APGD) treatment using argon as the discharge gas. The hydrophilicity and chemical changes on the IOL surface were characterized by static water contact angle and X-ray photoelectron spectroscopy to confirm the covalent binding of PEG. The morphology of the IOL surface was observed under field emission scanning electron microscopy and atomic force microscopy. The surface biocompatibility was evaluated by adhesion experiments with platelets, macrophages, and lens epithelial cells (LECs) in vitro. The results revealed that the anterior surface of the PEG-grafted IOL displayed significantly and permanently improved hydrophilicity. Cell repellency was observed, especially in the PEG-modified IOL group, which resisted the attachment of platelets, macrophages and LECs. Moreover, the spread and growth of cells were suppressed, which may be attributed to the steric stabilization force and chain mobility effect of the modified PEG. All of these results indicated that hydrophobic acrylic IOLs can be hydrophilic modified by PEG through APGD treatment in a convenient and continuous manner which will provide advantages for further industrial applications.     

近红外微弱光信号检测镜头的研制

运用ZEMAX设计了一款大孔径、小畸变微弱光信号检测镜头,与高灵敏近红外CCD图像传感器匹配,实现了对微弱单态氧¹O₂信号的实时、快速、高准确度的检测.检测镜头相对孔径1:0.86,半像高为6.3 mm,光谱范围为1 250~1 290 nm,放大倍率为1X,畸变小于0.1%.运用AutoCAD设计光学系统的机械结构,采用双高斯对称式结构以降低成本,手动聚焦、直插式滤片切换机构方便实验的调节,检测镜头研制成功并在实验中采集到较好的微弱单态氧¹O₂信号.