金复合介孔SBA-15吸附血红蛋白在H2O2电催化反应中的应用

以P123嵌段共聚物表面活性剂为模板剂制备介孔氧化硅SBA-15,并用沉积-沉淀(DP)法在SBA-15介孔表面负载纳米Au颗粒制备得到金复合介孔SBA-15材料(Au-SBA-15).再以Au-SBA-15材料制备玻碳修饰电极,将血红蛋白固定于修饰电极上用循环伏安法考察其对不同浓度H2O2溶液的电催化反应.在固定了血红蛋白的Hb/Au-SBA-15/GC修饰电极上,H2O2在+0.95 V处出现了氧化峰,且随着H2O2浓度的增大峰电流不断增加,说明金复合介孔氧化硅材料具有良好的生物兼容性,有利于血红蛋白的固定,其修饰电极对H2O2溶液具有一定的电催化作用.     

CdS nanocrystallites sensitized ZnO nanorods with plasmon enhanced photoelectrochemical performance

A sandwiched structure of CdS/Ag/ZnO nanorod photoanode exhibits greatly enhanced photoelectrochemical activity for solar hydrogen generation, due to synergistic effect of CdS nanocrystallites and plasmonic Ag nanoparticles for the enhanced optical absorption and the promoted charge carrier separation.     

Nanorods of Various Oxides and Hierarchically Structured Mesoporous Silica by Sol-Gel Electrophoresis

In this paper, we report the template-based growth of nanorods of oxides and hierarchically structured mesoporous silica, formed by means of a combination of sol-gel processing and electrophoretic deposition. Both single metal oxides (TiO₂) and complex oxides (Pb(Zr_0.52Ti_0.48)O₃) have been grown by this method. This method has also been applied to the growth of nanorods of mesoporous silica having an ordered pore structure, where the pores are aligned parallel to the long axis of the nanorod. Uniformly sized nanorods of about 125–200 nm in diameter and 10 m in length were grown over large areas with near unidirectional alignment. Appropriate sol preparation yielded the desired stoichiometric chemical composition and crystal structure of the oxide nanorods, with a heat treatment (500–700°C for 15–30 min) for crystallization, densification and any necessary pyrolysis.     

Construction of database of effective energy‐loss functions

Effective energy‐loss functions for Al, Cu, Ag and Au were derived from the reflection electron energy‐loss spectroscopy (REELS) spectra for 1 keV electrons using extended Landau theory. Features of the obtained effective energy‐loss functions are close to those of optical surface energy‐loss functions, revealing the significant contribution of the low energy loss below a few tens of electron‐volts in the REELS spectrum for Cu, Ag and Au. The REELS spectra were reproduced using the newly derived effective energy‐loss functions, leading to the confirmation that this type of database of the effective energy‐loss function is very useful not only for more comprehensive understanding of the measured spectrum of surface electron spectroscopies but also for practical background subtraction in surface electron spectroscopy. Copyright © 2003 John Wiley & Sons, Ltd.     

Development of a one-step immunochromatographic strip test for the rapid detection of nevirapine (NVP), a commonly used antiretroviral drug for the treatment of HIV/AIDS

Currently, high-performance liquid chromatographic (HPLC) methods are mainly used to measure antiretroviral plasma concentrations in HIV-infected patients. Although the utility of routine therapeutic drug monitoring (TDM) as an additional tool to optimize long-term antiretroviral therapy is unclear, if TDM is to be widely used, the availability of simple, cheap and reliable methods for the measurement of antiretroviral drug levels are needed, particularly in resource-limited settings. In this study, an immunochromatograhic (IC) strip test to detect the presence of nevirapine (NVP) in body fluids has been developed. Antiserum to NVP was first raised in rabbits by immunization against NVP chemically conjugated with bovine serum albumin, and subsequently validated by Western immunoblotting and competitive indirect ELISA. The partially purified anti-NVP antibodies were conjugated with colloidal gold particles. The conjugation of the colloidal gold and polyclonal antibodies was monitored by UV-vis spectroscopy, while transmission electron microscopy images were used to characterize the particle size and shape of the conjugates. The resulting colloidal gold conjugates were used for the production of an IC strip test to detect nevirapine in human plasma. Preliminary assessment suggests no-cross reactivity of the NVP polyclonal antibodies but assessment of plasma samples from HIV-infected patients receiving HAART needs to be conducted. This assay could potentially be used for drug monitoring as part of the clinical care of HIV infected patients.     

The synthesis and reactivity of the heptanuclear dianion [Os7(CO)20]2− including the synthesis and structural characterizations of the compounds [Os7(CO)20(AuPEt)3 2] and [Os8(CO)20(η6-C6H6]

Reduction of the heptaosmium cluster [Os₇(CO)₂₁] With [Et₄N][NH₄) gives the cluster dianion [Os₇(CO)₂₀]^2–,1, in high yield. The reaction of the dianion with [AuPR ₃Cl] (R=Et or Ph) in the presence of TlPF₆ forms [Os₇((CO)₂₀(AuPR ₃)₂] [R=Et (2a);R = Ph(2b)] in 80% yield, while the corresponding reaction with (Os(C₆H₆)(CH₃CN)₃]²⁺ gives [Os₈(CO)₂₀ ( ⁶-C₆H₆)] (3) in reasonable yield (ca. 30%). The dianion,1, and the clusters2 and3 have been fully characterized by bout spectroscopic and crystallographic methods. The crystal structure of the [Ph₄P]⁺ salt of1 shows that the metals in the anion adopt a capped octahedral geometry, with all twenty carbonyl ligands in terminal sites. The metal core geometry in2a is best described as a tricapped octahedron, and is based on the structure of the dianion1 with two adjacent octahedral faces capped by the Au atoms of the two AuPEt₃ groups. In a similar fashion, the geometry of3 is related to that of1 with the addition of an Os(C₆H₆) unit capped to a triangular face, to give a bicapped octahedral framework.     

Anthill Earth as a Gold Occurrence Indicator,and Gold Determination by Solid Sampling Flame Atomic Absorption Spectrometry

With the aim of avoiding cumbersome sample treatment, we present a device for the introduction of solid soil samples into AAS-flames for gold determination, as well as the proposition of earth from anthills as a gold occurrence indicator. A previous ground sample of anthill earth (0.50 mg) was weighed directly into a small recipient of polyethylene which was then connected to a sampling boronsilicate glass chamber. The sample was carried by an airflow (5 L min⁻¹) to a quartz cell positioned between the burner top and the optical beam. The generated atomic vapor produced a transient signal which was totally integrated in three seconds. The performance was compared with conventional flame atomic absorption spectrometry after proper sample digestion. No significant differences were observed between both procedures (mean deviation ±1.90%), and a LOQ of 0.03 μg Au was achieved using the proposed method. The anthill earth was found to be very suitable for indication of gold occurrence in soils and related materials.     

Amperometric Biosensor for Hydrogen Peroxide Based on Electrodeposited Sub-micrometer Gold Modified Glassy Carbon Electrode

IntroductionAmperometricbiosensorofhydrogenperoxideisofpracticalimportancebecauseofitswideapplicationsinchemical,biological,clinical,environmentalandmanyotherfields.Forimprovementofsensor抯quality,vari-ouskindsofchemicalmodificationmethodshavebeendevelopedforreducingredoxoverpotentialsofH2O2atelectrodesurfaces,increasingthedetectionsensitivity,linearrange,stabilityandlivetime.Ithasbeenshownthattheuseofsub-micrometersizedmetalparticlessuchasPt-blackcansignificantlyimprovethequalityofthebiosens…     

Synthesis, Chemical Characterization, and Molecular Structure of Au8{Fe(CO)4}4(dppe)2 and Au6Cu2{Fe(CO)4}4(dppe)2

The new Au₈{Fe(CO)₄}₄(P^P)₂ and Au₆Cu₂{Fe(CO)₄}₄(P^P)₂ (P^P=dppm, dppe) neutral cluster compounds were isolated in good yields by condensation of the [Au₃{Fe(CO)₄}₂(P^P)]^- anions with Au(SEt₂)Cl and CuCl, respectively, and have been characterized by IR, NMR and microanalyses. The molecular structures of Au₈{Fe(CO)₄}₄(dppe)₂ and Au₆Cu₂{Fe(CO)₄}₄(dppe)₂ have been determined by X-ray diffraction studies. Both molecules adopt a stereogeometry of the heavy atoms consisting of a triangulated and corrugated ribbon twisted around the elongation direction. Contrary to the expectations the latter displays the two copper atoms in the sites of highest connectivity. This implies that site exchange between copper and gold occurs during the synthesis.