一种经氟化和热处理在双壁碳纳米管上生成缺陷的方法(英文)

Nanoscale defects in the outer tube to preserve the electrical and optical features of the inner tube can be engineered to exploit the intrinsic properties of double walled carbon nanotubes (DWCNTs) for various promising applications. We demonstrated a selective way to make defects in the outer tube by the fluorination of DWCNTs followed by the thermal detachment of the F atoms at 1000 °C in argon. Fluorinated DWCNTs with different amounts of F atoms were prepared by reacting with fluorine gas at 25, 200, and 400 °C that gave the stoichiometry of CF0.20, CF0.30, and CF0.43, respectively. At the three different temperatures used, we observed preservation of the coaxial morphology in the fluorinated DWCNTs. For the DWCNTs fluorinated at 25 and 200 °C, the strong radial breathing modes (RBMs) of the inner tube and weakened RBMs of the outer tube indicated selective fluorine attachment onto the outer tube. However, the disappearance of the RBMs in the Raman spectrum of the DWCNTs fluorinated at 400 °C showed the introduction of F atoms onto both inner and outer tubes. There was no significant change in the morphology and optical properties when the DWCNTs fluorinated at 25 and 200 °C were thermally treated at 1000 °C in argon. However, in the case of the DWCNTs fluorinated at 400 °C, the recovery of strong RBMs from the inner tube and weakened RBMs from the outer tube indicated the selective introduction of substantial defects on the outer tube while preserving the original tubular shape. The thermal detachment of F atoms from fluorinated DWCNTs is an efficient way to make highly defective outer tubes for preserving the electrical conduction and optical activity of the inner tubes.     

ZnO纳米管有序阵列与Cu2O纳米晶核壳结构的光电化学性能及全固态纳米结构太阳电池研究简

采用电化学方法在铟锡氧化物(ITO)导电玻璃基底上制备了高度有序的ZnO纳米管阵列,然后在ZnO纳米管阵列上电化学沉积Cu2O纳米晶颗粒,获得了一维有序Cu2O/ZnO核壳式纳米阵列结构,通过控制Cu2O纳米晶的沉积电量得到不同厚度的Cu2O壳层,并对该核壳式纳米阵列的形貌和结构进行了分析. 以Cu2O/ZnO一维核壳式纳米阵列结构为光电极组装全固态纳米结构太阳电池,研究了Cu2O壳层厚度对光电极光吸收性能、光电性能以及组装电池光伏性能的影响,优化了电池中对电极材料的喷金厚度. 结果表明,以Cu2O沉积电量为1.5 C的Cu2O/ZnO为光活性层,以4 mA电流下真空镀金20~25 min的铜基底为对电极组装的简易太阳电池最高可获得0.013%的光电转换效率.     

表面修饰多壁碳纳米管负载二氧化钛的制备及催化碳酸二甲酯与苯酚酯交换反应的性能

制备了表面修饰多壁碳纳米管负载TiO₂的催化剂,并将其应用于碳酸二甲酯与苯酚的酯交换反应. 采用X射线电子能谱、透射电子显微镜、低温N₂吸附-脱附和X射线衍射等对催化剂进行了表征. 结果表明,以低浓度的氨水（0.4%）代替去离子水作为沉淀剂时,制备的催化剂显示出更好的催化活性、分离性与重复使用性. 考察了TiO₂负载量、催化剂用量及反应时间对反应性能的影响. 在最佳反应条件下,苯酚转化率为42.5%,碳酸甲苯酯与碳酸二苯酯的总选择性达到99.9%以上. 经过4次重复使用后,催化剂的活性略有下降.     

Facile Fabrication of Platinum Nanoparticles Supported on Nitrogen-doped Carbon Nanotubes and Their Catalytic Activity

A facile impregnation method under mild condition is designed for synthesis of highly dispersed Pt nanoparticles with a narrow size of 4-7 nm on nitrogen-doped carbon nanotubes （CNx）. CNx do not need any pre-surface modification due to the inherent chemical activity. The structure and nature of Pt/CNx were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy and energy dispersive spectroscopy spectrum. All the experimental results revealed that the large amount of doped nitrogen atoms in CNx was virtually effective for capturing the Pt（IV） ions. The improved surface nitrogen functionalities and hydrophilicity contributed to the good dispersion and immobi- lization of Pt nanoparticles on the CNx surface. The Pt/CNx served as active and reusable catalysts in the hydrogenation of allyl alcohol. This could be attributed to high dispersion of Pt nanoparticles and stronger interaction between Pt and the supports, which prevented the Pt nanoparticles from aggregating into less active Pt black and from leaching as well.     

Tetrabutylammonium Salts of Aluminum(III) and Gallium(III) Phthalocyanine Radical Anions Bonded with Fluoren‐9‐olato− Anions and Indium(III) Phthalocyanine Bromide Radical Anions

Reduction of aluminum(III), gallium(III), and indium(III) phthalocyanine chlorides by sodium fluorenone ketyl in the presence of tetrabutylammonium cations yielded crystalline salts of the type (Bu₄N⁺)₂[M^III(HFl−O⁻)(Pc^.3−)]^.−(Br⁻) ⋅ 1.5 C₆H₄Cl₂ [M=Al ( 1 ), Ga ( 2 ); HFl−O⁻=fluoren‐9‐olato⁻ anion; Pc=phthalocyanine] and (Bu₄N⁺) [In^IIIBr(Pc^.3−)]^.− ⋅ 0.875 C₆H₄Cl₂ ⋅ 0.125 C₆H₁₄ ( 3 ). The salts were found to contain Pc^.3− radical anions with negatively charged phthalocyanine macrocycles, as evidenced by the presence of intense bands of Pc^.3− in the near‐IR region and a noticeable blueshift in both the Q and Soret bands of phthalocyanine. The metal(III) atoms coordinate HFl−O⁻ anions in 1 and 2 with short Al−O and Ga−O bond lengths of 1.749(2) and 1.836(6) Å, respectively. The C−O bonds [1.402(3) and 1.391(11) Å in 1 and 2 , respectively] in the HFl−O⁻ anions are longer than the same bond in the fluorenone ketyl (1.27–1.31 Å). Salts 1 – 3 show effective magnetic moments of 1.72, 1.66, and 1.79 μ_B at 300 K, respectively, owing to the presence of unpaired S= 1/2 spins on Pc^.3−. These spins are coupled antiferromagnetically with Weiss temperatures of −22, −14, and −30 K for 1 – 3 , respectively. Coupling can occur in the corrugated two‐dimensional phthalocyanine layers of 1 and 2 with an exchange interaction of J /k _B=−0.9 and −1.1 K, respectively, and in the π‐stacking {[In^IIIBr(Pc^.3−)]^.−}₂ dimers of 3 with an exchange interaction of J /k _B=−10.8 K. The salts show intense electron paramagnetic resonance (EPR) signals attributed to Pc^.3−. It was found that increasing the size of the central metal atom strongly broadened these EPR signals.     

Bismuth Nanoparticles@Porous Silicon Nanostructure,Application as a Selective and Sensitive Electrochemical Sensor for the Determination of Thioridazine

A bismuth@porous silicon (Bi/PSi) nanostructure is fabricated and used as a new highly sensitive electrochemical sensor for measurement of thioridazine. For this purpose, commercial silicon powder is converted to porous silicon using metal‐assisted chemical etching method. Then, bismuth nanoparticles are deposited on the surface of the porous silicon that synthesized in the previous step. The effects of pH and instrumental parameters are studied on the sensor response. After optimization of the parameters, differential pulse voltammetry is used to determine sub‐micro molar amounts of thioridazine. The Linear region of the electrochemical sensor is in the range of 0.1 to 260 μmol L⁻¹ thioridazine with a detection limit of 0.03 μmol L⁻¹, when Bi/PSi/CNTPE is used as an electrochemical sensor. The precision and accuracy of the sensor is evaluated. The Bi/PSi/CNTPE is used as an appropriated tool for accurate measurement of low amounts of thioridazine in real samples with satisfactory results.     

溶胶-凝胶模板法制备钛酸钡纳米管

采用氢氧化钡和钛酸四丁酯为前驱体, 溶胶-凝胶结合模板法制备了钛酸钡纳米管, 通过SEM, TEM, XPS和XRD等表征分析, 钛酸钡纳米管直径100 nm, 钛酸钡为立方相结构, 晶胞参数a＝3.995 Å.     

碳纳米管修饰金电极检测特定序列DNA

利用化学偶联法将末端修饰氨基的寡聚核苷酸固定在表面修饰有羧基化碳纳米管(CNTs-COOH)的金电极表面, 制备新型核酸探针, 可以特异性结合目标单链寡聚核苷酸. 以阿霉素作为嵌合指示剂, 利用示差脉冲法测定杂交的结果. 经过实验条件的优化, 测定DNA浓度在1.0×10^－6～1.0×10^－9 mol/L呈良好的线性关系. 检测限为: 2.54×10^－10 mol/L. 碳纳米管特有的纳米结构对检测结果的放大作用, 提高了该传感器的检测限和灵敏度.     

酵母核糖核酸在碳纳米管修饰电极上的电化学行为及其分析测定

研究了酵母核糖核酸（yRNA）在碳纳米管（MWNT）修饰电极上的电化学行为，优化了测定参数，在此基础上建立了一种直接测定yRNA的电分析测试方法。yRNA在碳纳米管修饰电极上于磷酸盐缓冲溶液中在0．758V处产生不可逆的氧化电流峰，峰电流与yRNA的质量浓度在1～10mg／mL之间有良好的线性关系，线性回归方程为：Iρ=0．0813ρ＋0．1807，相关系数r为0．9980，检出限为0．6mg／mL。     

聚多巴胺还原高锰酸钾制备二氧化锰阵列纳米管

以通过水热法在石英玻璃片表面合成的ZnO纳米棒为模板,在其表面生成聚多巴胺薄膜,然后与KMnO4反应,制备了MnO_2阵列纳米管。经表征发现,制备的MnO_2纳米管形态良好,在基底表面的附着力强;所制备的MnO_2为非晶型。由于ZnO模板易合成、易去除、形态好,且聚多巴胺薄膜的生成方法也很简便易行,使得该制备MnO_2纳米管阵列的方法具有简便、快捷、适用性广等的特性,对MnO_2新形态纳米结构的构建具有一定的启示作用。