Direct Comparison of Subvalent,Polycationic Group 13 Cluster Compounds: Lessons learned on Isoelectronic DMPE Substituted Gallium and Indium Tetracation Salts

The tetracationic, univalent cluster compounds [{M(dmpe)}₄]⁴⁺ (M=Ga, In; dmpe=bis(dimethylphosphino)ethane) were synthesized as their pf salts ([pf]⁻=[Al(OR^F)₄]⁻; R^F=C(CF₃)₃). The four-membered ring in [{M(dmpe)}₄]⁴⁺ is slightly puckered for M=Ga and almost square planar for M=In. Yet, although structurally similar, only the gallium cluster is prevalent in solution, while the indium cluster forms temperature dependent equilibria that include even the monomeric cation [In(dmpe)]⁺. This system is the first report of one and the same ligand inducing formation of isoelectronic and isostructural gallium/indium cluster cations. The system allows to study systematically analogies and differences with thermodynamic considerations and bonding analyses, but also to outline perspectives for bond activation using cationic, subvalent group 13 clusters.     

Multiwalled Carbon Nanotubes Modified with Silylated-salicylaldimine Co(II) and Pd(II) Complexes as Precatalysts in Ethylene Oligomerization

MWCNTs-Co(II) and Pd(II) were prepared through grafting silylated-salicylaldimine Pd(II) and Co(II) on multiwalled carbon nanotubes(MWCNTs) for ethylene oligomerization. The structures of the two MWCNTs-supported catalysts were characterized by means of scanning electron microscopy(SEM), X-ray diffraction(XRD), Fourier transform infrared(FTIR) spectroscopy, thermogravimetric analyses(TGA) and nitrogen adsorption and desorption. And the influence of the supported pattern on the catalytic properties for ethylene oligomerization was investigated. The results revealed that the silylated-salicylaldimine complexes were grafted on the inner and outer surfaces of the carbon nanotubes and the pore size and BET surface area of MWCNTs decreased. Compared with the homogeneous catalysts, the two MWCNTs-supported catalysts had higher selectivity for hexene and 1-hexene in the presence of diethylaluminum chloride(DEAC) with a small molecule size due to confinement effect. MWCNTs-Pd exhi-bited higher activity and higher selectivity for C₈⁺ olefin compared to MWCNTs-Co due to electronic factors. The catalytic activities of MWCNTs-Pd and MWCNTs-Co decreased from 24.18×10⁵g·(mol Pd·h)^–1 and 20.57×10⁵g·(mol Co·h)^–1 to 19.79×10⁵g·(mol Pd·h)^–1 and 13.14×10⁵g·(mol Co·h)^–1 after the third recycle reaction, respectively.     

A Simple Homoleptic Gallium(I) Olefin Complex: Mimicking Transition‐Metal Chemistry at a Main‐Group Metal?

The earth‐metal olefin complex [Ga ^I (COD)₂]⁺[Al(OR^F)₄]^? (COD=1,5‐cyclooctadiene; R^F=C(CF₃)₃) constitutes the first homoleptic olefin complex of any main‐group metal accessible as a bulk compound. It is straight forward to prepare in good yield and constitutes an olefin complex of a main‐group metal that—similar to many transition‐metals—may adopt the +1 and +3 oxidation states opening potential applications. Crystallographic‐, vibrational‐ and computational investigations give an insight to the atypical bonding between an olefin and a main‐group metal. They are compared to classical transition‐metal relatives.     

Dispersion of Carbon Nanotubes with “Green” Detergents

Solubilization of carbon nanotubes (CNTs) is a fundamental technique for the use of CNTs and their conjugates as nanodevices and nanobiodevices. In this work, we demonstrate the preparation of CNT suspensions with “green” detergents made from coconuts and bamboo as fundamental research in CNT nanotechnology. Single-walled CNTs (SWNTs) with a few carboxylic acid groups (3–5%) and pristine multi-walled CNTs (MWNTs) were mixed in each detergent solution and sonicated with a bath-type sonicator. The prepared suspensions were characterized using absorbance spectroscopy, scanning electron microscopy, and Raman spectroscopy. Among the eight combinations of CNTs and detergents (two types of CNTs and four detergents, including sodium dodecyl sulfate (SDS) as the standard), SWNTs/MWNTs were well dispersed in all combinations except the combination of the MWNTs and the bamboo detergent. The stability of the suspensions prepared with coconut detergents was better than that prepared with SDS. Because the efficiency of the bamboo detergents against the MWNTs differed significantly from that against the SWNTs, the natural detergent might be useful for separating CNTs. Our results revealed that the use of the “green” detergents had the advantage of dispersing CNTs as well as SDS.     

Growth of Single-walled Carbon Nanotubes on Substrates Using Carbon Monoxide as Carbon Source

The growth of single-walled carbon nanotubes(SWCNTs) on substrates has attracted great interests because of the potential applications in various fields. Carbon monoxide(CO) was used as the carbon source for the growth of SWCNTs on silicon substrates. Random or oriented SWCNTs can be produced by varying the CO flow rate. When the flow rate of CO was as low as 20 sccm(sccm:standard cubic centimeter per minute), dense SWCNT networks with clean surface were produced. When the flow rate was above 50 sccm, vertically aligned SWCNT(VA-SWCNT) arrays were grown. Well-aligned VA-SWCNT arrays were obtained in the temperature range of 650-800℃ and the content of large-diameter(above 1.7 nm) tubes in the array increased with the temperature. The height of the array was affected by the growth temperature, the CO flow rate, and the growth time. These findings indicate CO can be used as an efficient carbon source for the growth of SWCNTs on substrates under low flow rates.     

AgNP-decorated SBA-15 for MWCNT Paste Modified Electrode: A Sensor for Simultaneous Voltammetric Determination of Paracetamol and Sulfamethoxazole

A new electrochemical sensor based on a carbon nanotube paste electrode modified with a Santa Barbara Amorphous material (SBA-15) decorated with silver nanoparticles, namely CNT/SBA/Ag-PE, was developed. It was successfully applied for individual and simultaneous determination of both paracetamol (PC) and sulfamethoxazole (SMZ) medicines. The electrode exhibited a linear dynamic range of 0.12–110 μmol L⁻¹ for paracetamol and 0.06–70 μmol L⁻¹ for sulfamethoxazole, and detection limits of 38 and 19 nmol L⁻¹, respectively. The proposed sensor offered high sensitivity, fast response time and the potential for detecting both drugs simultaneously. The CNT/SBA/Ag-PE enabled the simultaneous determination of PC and SMZ in urine samples with high recovery rates.     

Electrochemical Biosensor Design with Multi-walled Carbon Nanotube to Display DNA-Schiff Base Interaction

This paper demonstrates a Schiff base i. e. 5-(diethylamino)-2-((2,6-diethylphenylimino)methyl)phenol (5-DDMP) that was sensed by DNA biosensor. dsDNA was immobilized onto GCE modified with functionalized multi-walled carbon nanotubes to prepare a biosensor. The efficiency of dsDNA biosensor was determined and binding of 5-DDMP with dsDNA was searched by UV-vis spectrophotometry and differential pulse voltammetry. Molecular docking simulations between 5-DDMP and dsDNA were explored and as a result, a hydrogen bond and a π-π contact were observed between 5-DDMP and deoxyguanosine base (dG22) of the strand B, deoxyadenosine base (dA5) of the strand A, respectively. These studies could be useful for new anticancer drug design and development.     

Viscoelastic wave propagation in the viscoelastic single walled carbon nanotubes based on nonlocal strain gradient theory

In this paper, the viscoelastic wave propagation in an embedded viscoelastic single-walled carbon nanotube (SWCNT) is studied based on the nonlocal strain gradient theory. The characteristic equation for the viscoelastic wave in SWCNTs is derived. The emphasis is placed on the influence of the tube diameter on the viscoelastic wave dispersion. A blocking diameter is observed, above which the wave could not propagate in SWCNTs. The results show that the blocking diameter is greatly dependent on the damping coefficient, the nonlocal and the strain gradient length scale parameters, as well as the Winkler modulus of the surrounding elastic medium. These findings may provide a prospective application of SWCNTs in nanodevices and nanocomposites.     

A Molecular Analogue of the C−H Activation Intermediate of the Silica-Supported Ga(III) Single-Site Propane Dehydrogenation Catalyst: Structure and XANES Signature

Propane dehydrogenation is an important field of research due to an increasing world-wide demand of propene while classical production routes through naphtha cracking are in decline. In that context, silica-supported Ga(III) sites, synthesized from surface organometallic chemistry principles, show high selectivity and stability in the propane dehydrogenation reaction. This performance is in significant contrast to the reported fast deactivation and lower selectivity of most Ga₂O₃ and CrO₃ based materials. The Ga-catalyzed propane dehydrogenation reaction is proposed to proceed through the formation of Ga alkyl intermediates for which it would be desirable to have detailed structural and spectroscopic information. Here, we prepare a consistent series of Ga(III) molecular complexes with varying numbers of alkyl and siloxide ligands; they are characterized by single crystal X-Ray diffraction and X-Ray Absorption Near Edge Structure analysis, which is known to be highly sensitive to the Ga coordination environment. We report in particular the structure and the spectroscopic signatures of [Ga(ⁱPr)(OSi(O^tBu)₃)₂(HOSi(O^tBu)₃)], a molecular mimic of the key proposed reaction intermediates in the Ga-catalyzed PDH reaction.     

复合材料柔软性对倒金字塔微结构阵列传感器性能的影响

采用模压成型方法制备了2种柔软性不同的热塑性聚氨酯/短切碳纤维/碳纳米管(TPU/SCF-CNT)复合材料复制物, 其表面上具有倒金字塔微结构阵列, 内部有SCF与CNT共同构成的导电通路. 将复合材料复制物和相应的复合材料平整片封装成柔性传感器. 结果表明, 压力作用下传感器内复制物和平整片之间的接触电阻因倒金字塔底棱的形变而显著降低. 对使用柔软性较高的复合材料封装的传感器, 虽然其相对迟滞稍大, 但压力作用下倒金字塔底棱形变量较大, 且复制物和平整片内导电通路增加量较大, 因此其在0~2.5 kPa的线性区内具有较高的灵敏度(0.32 kPa^?1). 制备的2种传感器均具有快速响应特性, 且能在500 s(约1580次)的循环压缩/释放测试(峰值压力约3 kPa)中保持较稳定的电阻响应. 研究表明, 利用模压成型的表面倒金字塔结构复合材料复制物封装成的柔性压力传感器具有良好的传感性能.