群集建筑中大跨裙摆屋盖风荷载特性的数值模拟研究

以苏州太平金融大厦为工程背景,针对其大跨裙摆屋盖的风荷载作用,首先采用RNG k-ε模型模拟分析了其平均风压分布规律,以及风向变化对屋盖表面风荷载体型系数的影响;其次,引入干扰因子IF,探讨了周边建筑对大跨裙摆屋盖风荷载的气动干扰作用。结果表明:0°风向下,走廊上方屋盖两侧区域出现“上吸下顶”的叠加作用;90°风向下屋盖北侧飘带末端区域受到狭道风效应出现正压集中现象;风向变化对大跨裙摆屋盖的风荷载体型系数分布影响较大;且周围建筑物对大跨裙摆屋盖的气动干扰效应明显,主要表现为风压“遮挡效应”,而局部区域表现为风压“放大效应”。     

Quantifying interference in multipartite quantum systems

The characterization of quantum correlations is crucial to the development of new quantum technologies and to understand how dramatically quantum theory departs from classical physics. Here we systematically study single- and multiparticle interference patterns produced by general two- and three-qubit systems. From this we establish on phenomenological grounds a new type of quantum correlation for these systems, which we name quantum interference, deriving some quantifiers that are given explicitly in terms of the density matrix elements of the complete system. By using these quantifiers, we show that, contrary to our expectations, entanglement is not a required property for a composite quantum system to manifest multiparticle interference.     

高纯氧化镝电感耦合等离子体原子发射光谱法摄谱分析时光谱干扰校正方法的研究

本文建立了高纯氧化镝样品ICP摄谱分析时干扰系数法校正光谱干扰的方法。测定了镝基体对14种稀土杂质元素20条灵敏分析线的干扰系数(KCT)。并有效地校正了镝基体造成的光谱干扰,获得满意的结果。     

惰气熔融-热导法测定钕铁硼永磁材料中的氢

建立惰气熔融-热导法测定钕铁硼永磁材料中氢的分析方法。当氧-氢比例大于50:1时,CO对氢的测定结果产生一定的干扰,加入舒茨试剂可消除此干扰。采用标准坩埚,称样0.05g,熔融功率为2.85 kW,选择高纯镍篮和锡片做助熔剂,钕铁硼中氢释放完全。以普通钢铁参考物质建立氢校准曲线,线性相关系数r～2=0.9999,检出限为0.75μg/g。该法用于钕铁硼样品中氢的测定,测定结果与脉冲熔融飞行时间质谱-气体元素分析仪测定结果基本一致,测定结果的相对标准偏差为1.4%(n=5)。该方法可以准确测定钕铁硼永磁材料中的氢,能满足日常分析的要求。     

适用小分子化合物MALDI分析的基质研究

基质辅助激光解吸电离技术（matrix assisted laser desorption/ionization,MALDI）是20世纪80年代发展起来的一种应用于质谱分析的电离化技术。MALDI技术在生物大分子的分析和检测方面获得了良好的应用。由于受有机基质分子的干扰,MALDI在小分子化合物分析方面的应用受到很大的限制。近年来为解决这一问题,一些用于MALDI分析的新型材料被设计和开发出来。这些新型材料主要包括：碳、硅、纳米金属等无机材料和新型有机分子等。除此之外,在传统基质中添加表面活性剂和对分析物衍生化等方法也被成功应用于小分子化合物的MALDI质谱分析中。本文对这些可应用于小分子化合物分析的新型MALDI基质进行了综述和展望。     

电感耦合等离子体原子发射光谱(ICP-AES)法测定锡精矿中8种杂质元素

应用电感耦合等离子体原子发射光谱(ICP-AES)法同时测定锡精矿中钙、镁、铜、铅、锌、砷、锑、铋8种杂质元素。对锡精矿样品的分解方法进行了合理选择,并对测定时的元素分析谱线、基体及各测定元素间干扰情况等进行了讨论。采用硝酸、盐酸、氢氟酸、高氯酸溶样,盐酸浸取。基体效应较小,各待测元素之间基本无干扰。测定结果与国家标准方法比对结果基本一致,相对标准偏差为1.3%~3.3%(n=11),方法加标回收率为96.0%~105%,能满足实际工作中准确、高效地分析锡精矿中杂质元素的需要。     

Statistical Model for Organic Chromatographic Trace Analysis of Complex Samples. A Case Study: Plant Extracts

Abstract

The use of pooled plant extracts is described in the estimation of matrix interference in HPLC (UV and EC) determinations of organic compounds in plant extracts. An extract from freeze dried leaves of 134 different plant species was used for this purpose. It was split in different subgroups with solid extraction clean-up procedures. UV, EC and chromatographic data of the subgroups were used in the calculation of minimum concentrations of organic compounds which are still accurately determinable in plant samples with HPLC methods. The UV and/or EC characteristics of the compound must be known. The contribution of the solid phase extraction procedures and of the analytical system to the selectivity of the method can be estimated. Information is also supplied which allows rapid comparison of the selectivity of the UV and EC (single, or dual parallel) detectors for the determination of a specified compound.     

Improved Calcium Ion-Selective Electrode Based on a Neutral Carrier

Abstract

The performance of a liquid-membrane electrode using a synthetic, neutral carrier in o-nitro-phenyl-n-octyl-ether as membrane component in a PVC matrix, in the presence of sodium tetra-phenyl-borate, is described. Selectivities, working range, lifetime and anion interference are discussed. The electrode makes possible the measurement of calcium ion activities in the range 10^?1M to 10^?6M in unbuffered and in the range 10^?1M to 10^?8M in calcium buffered systems respectively. The selectivities of calcium over protons, magnesium, sodium and zinc are 25,000, 26,000, 2,800 and 7,100, respectively, and are far superior than those reported for other calcium sensors.     

X-射线荧光光谱法(XRF)测定钼精矿中多种元素

详细论述了压片法及熔融片法测定钼精矿的分析条件。其中压片法通过大量采用同一矿区的生产样品经化学定值后作为校准样品建立校准曲线,因此粒度效应和矿物效应基本上可忽略。详细地讨论了元素之间谱线干扰、背景和脉冲高度选择。使用经验系数法校正基体效应,可准确测定钼精矿中的钼、硫、铁、铜、铅、锌等11种元素。在熔融片法中主要讨论了元素谱线的选择及其相互之间的干扰,经理论α系数校正后,可准确测定不同钼矿中的多种元素,其适用范围更广。