粘度法研究高分子溶液行为的实验改进(Ⅱ)

高分子在粘度计毛细管管壁上的吸附不仅会导致毛细管有效管径减小，而且可以导致毛细管界面性质发生显著改变，具体表现为测定高分子溶液流过时间t之前和之后纯溶剂的流过时间t0和t0′与高分子溶液流过时间t对浓度作图外推到浓度为零时的值t0^*并不一致。不同温度时聚乙烯吡咯烷酮（PVP）水溶液粘度测定结果表明，当吸附讷发子显著改变了毛细管界面性质时，需要将高分子溶液粘度测定方法由t/t0′改为t/t0^*。经过改进的粘度测定方法不仅更加普适合理，而且更加简单有效。     

Electrochemistry of capillary systems with narrow pores. IV. Dialysis potentials

The dialysis potentials of different collodion membranes with graded pore sizes and electrochemical activities have been measured in dilute aqueous KCl solutions as functions of concentration. It is possible to predict the value of the diffusion potential within a few millivolts on the basis of electrical conductivity data obtained with the same membranes. In general, the measured values are lower than those calculated. It is assumed that this difference is caused by the membranes having a distribution of pore sizes.     

直接甲醇燃料电池阴极电催化剂的研究进展

直接甲醇燃料电池(DMFC)功率密度高，燃料甲醇价格低廉、储存和携带方便，特别适合作为电动车和小型电子设备的电源，是目前燃料电池研究领域的一个热点。本文介绍了40年来DMFC阴极电催化剂的发展历史及现状，并针对目前严重影响DMFC性能的“甲醇透过”问题，阐述了研制耐甲醇阴极电催化剂的重要性，讨论了今后DMFC阴极电催化剂的发展趋势。     

吸热碳氢燃料裂解镧改性混合型催化剂的研究

制备了吸热型碳氢燃料NNJ-150和镧离子交换改性的USY、ZSM-5分子重申及混合分子筛，考察了NNJ-150在USHY、HZSM-5和两者混合物以及镧改性单分子筛和混合分子筛催化剂上的裂解反应。结果表明，ZSM-5分子筛中添加镧，对NNJ-150的单分子裂解反应有明显影响；混合分子两种分子筛之间存在协同作用，低温（500℃）下，LaUSY LaZSM-5（75：25）混合分子筛对低碳烯烃的选择性较高（41.48％），催化剂寿命较长（35min以上），能有效提高吸热型碳氢燃料NNJ-150的吸热能效。     

Theory of measurement of gas-adsorption equilibria by rotational oscillations

The gas adsorbed on the inner surface of a highly porous material like activated carbon or zeolite can be measured by slow damped oscillations of a torsional pendulum. The physical principles and the theory of this method are outlined. Formulas are given relating the increase in mass due to adsorption to changes of the frequency and the logarithmic decrement of slow, damped rotational oscillations of the pendulum. Preliminary measurements of gas adsorption equilibria of nitrogen on activated carbon show that the ratio of the mass adsorbedm, to the mass of the adsorbentm ^s , can be determined by this method with mean absolute error |m/m ^s |0.04%.Dedicated to the memory of Joseph Kestin (1913–1993).     

Cellulose-precursor synthesis of nanocrystalline Ce<Subscript>0.8</Subscript>Gd<Subscript>0.2</Subscript>O<Subscript>2−δ</Subscript> for SOFC anodes

Developments of intermediate-temperature solid oxide fuel cells (IT SOFCs) require novel anode materials with a high electrochemical activity at 800–1070 K. The polarization of cermet anodes, made of nickel, ceria and yttria-stabilized zirconia (YSZ) and applied onto a YSZ solid electrolyte, can be significantly reduced by catalytically active ceria additions, the relative role of which increases with decreasing temperature. Further improvement is observed when using Ce_0.8Gd_0.2O_2– (CGO) having a high oxygen ionic conductivity instead of undoped ceria, owing to enlargement of the electrochemical reaction zone. Nanocrystalline CGO powders with grain sizes of 8–35 nm were thus synthesized via the cellulose-precursor technique and introduced into Ni–CGO–YSZ cermets, and tested in contact with a (La_0.9Sr_0.1)_0.98Ga_0.8Mg_0.2O_3– (LSGM) electrolyte at 873–1073 K. The results showed that the anode performance can be enhanced by additional surface activation, in particular by impregnation with a Ce-containing solution, and also by incorporation of YSZ, which probably acts as a cermet-stabilizing component. The overpotential of the surface-modified Ni–CGO (25 wt%–75 wt%) anode in a 10% H₂/90% N₂ atmosphere was approximately 110 mV at 1073 K with a current density of 200 mA/cm².Presented at the OSSEP Workshop Ionic and Mixed Conductors: Methods and Processes, Aveiro, Portugal, 10–12 April 2003     

Microphase separation of PEG-modified urethane acrylate and the swelling behavior of its gels

The viscosity of PEG-modified urethane acrylate (PMUA) showed peculiar behavior in the course of soap-free emulsification. Moreover, the viscosity change with added amounts of water was influenced by the reaction molar ratio of polyethylene glycol (PEG). The rate of increase in viscosity slowed and the ratio of increase in viscosity increased as the reaction molar ratio of PEG increased. This peculiar viscosity behavior was due to the microphase separation between hydrophilic and hydrophobic segments of PMUA, and the orientation of polyoxyethylene groups at O/W interface which influenced droplet size of the soap-free PMUA emulsion. The location of polyoxyethylene groups of this resin at O/W interface was confirmed using the adsorption isotherm measurement of PMUA molecules containing polyoxyethylene groups at water/benzene interface. The microphase separation behavior of PMUA between hydrophilic and hydrophobic segments could apply to the preparation of the PMUA gels containing peculiar structure. PMUA gels were prepared using dioxane (UAG) and the swelling behavior of these gels were compared to that of gels prepared using water (UAHG) in the same medium. In the same medium, the swelling behavior of UAHG gels differed from that of UAG gels because of the difference in the microstructure of gel due to the microphase separation between hydrophilic and hydrophobic segments. This phase separation in the course of gelation in water could be confirmed using contact angle measurement.     

对固体圆二色光谱测试方法的再认识——兼谈“浓度效应”

对近期发展的固体圆二色(CD)光谱测试方法进行了概述、评价和比较, 着重探讨了“浓度效应”的存在使固体CD光谱失真的原因. 通过对本课题组和其他作者已报道的四种化合物的固体CD谱再测试的反思, 强调了依手性化合物的手性光谱学性质不同, 根据浓度梯度实验选择其合适测试浓度的必要性. 对固有手性的阻转异构化合物(S)-1,1'-联二萘酚(S-BINOL)进行了成膜法固体CD谱浓度梯度测试, 发现所得固体薄膜CD谱中也存在着“浓度效应”     

四氢呋喃-水-乙醇三元溶液体系制备高合金化Pt-Ru/CMK-3催化剂

提出了在四氢呋喃(THF)、H2O和乙醇三元体系中用一般的化学还原法在室温下制备高合金化Pt-Ru/CMK-3催化剂的新方法. 与在纯水中制得的商品化ETEK催化剂相比, 其Pt-Ru粒子的合金化程度高、平均粒径较小且相对结晶度低, 因此, 该催化剂对甲醇氧化的电催化活性远高于在纯水中制得的Pt-Ru催化剂. 高合金化程度的原因是H2PtCl6和RuCl3在THF、H2O和乙醇三元溶液体系中的起始还原电位相近. 此外, CMK-3以其规整的二维有序孔道结构, 为直接甲醇燃烧电池(DMFC)中电子和物质的传输提供了方便的路径, 其巨大的比表面积也为Pt-Ru 纳米粒子的均匀分散提供了良好的载体.