钢卷尺刻度在线测量系

本文介绍了一种钢卷尺刻度在线测量系统 ,它采用了高速摄像及计算机数据处理技术 ,文章阐述了系统的非接触动态测量原理 ,描述了光电信号的处理方法 .     

Glass and polymeric membrane electrodes for the measurement of pH in milk and cheese

While there is a considerable interest in the food industry in determining various analytes using ion-selective electrodes (ISEs), only few reports describe their use for direct measurements in food. In this study, the suitability of glass electrodes and ionophore-based solvent polymeric ISEs for the determination of pH in Process cheese, Cheddar cheese and milk was investigated. The liquid junction potential between a 3 M KCl bridge electrolyte and diluted as well as undiluted Process cheese was found to be negligible. Reference electrodes with ceramic plug and sleeve-type junctions performed well, although precautions needed to be taken to prevent plugging at the junctions. While the protein rennet casein posed no problems in pH measurements, the extraction of neutral lipophilic compounds or hydrophobic peptides into solvent polymeric membranes was evident, resulting in some loss of selectivity for monovalent cations upon exposure to cheese. However, it was found that ISEs based on tridodecylamine (R₃N) as ionophore and o-nitrophenyl octyl ether (oNPOE) as plasticizer can be used to accurately measure the pH of milk and, after desensitization of the electrodes in a cheese emulsion, of diluted Process cheese. Since pH measurements with a glass electrode showed that emulsions of cheese moderately diluted to a cheese content of 70% have the same pH as undiluted cheeses, it is possible to determine the pH in cheese with ionophore-based ISEs. R₃N membranes also performed well in undiluted milk.     

气相色谱质谱法快速测定人血浆中克仑特罗

血浆样品经0.01mol·L-1盐酸和无水乙醇浸取,在碱性条件下用氯仿萃取,GG-MS-选择离子测量法测定,外标法定量。在选定的色谱条件下,盐酸克仑特罗的检出限为0.05ng,线性范围为0.1-100ng,方法的平均回收率为95.6％,RSD小于6.82％(n=6)。该法毋需衍生化,基质无干扰,简便可靠,适用于生物材料中克仑特罗的快速分析。     

腔长失调对光腔衰荡法测量精度的影响

 只考虑腔长失调因素下建立了反射率模拟测量的理论模型。根据高斯光束传输规律分析了腔长失调对衰荡腔模式耦合的影响，推导了腔长失调与谐振腔输出脉冲信号、衰荡信号与反射率之间的关系，模拟了腔长失调在±10mm范围内的光脉冲衰荡现象。结果表明：对于光敏面直径为0.2mm的高速探测器，为了保证10^-6的测量精度，腔长的失调量应控制在±1mm之间。在光路调节中采用具有对数变换功能的示波器和动态范围较大的探测器，可以提高测量精度。     

中子成像技术在元素分析中的应用

中子成像作为一种快速、直观的无损检测技术,在核工业、航空航天、新能源、地质、考古、先进制造等多个领域得到广泛应用。中子成像利用中子不带电、穿透能力强、对轻元素敏感、可区分同位素和近邻元素等特性,非常适合开展含氢元素、近邻元素和同位素等材料的无损检测。本文概述了中子成像技术的基本原理及特点,并结合中国先进研究堆(CARR)中子成像装置上的应用案例, 重点介绍了国内外中子成像技术在储氢材料、燃料电池、岩石、核燃料元件、古代文物等领域的典型应用。随着中子成像技术的不断发展和广泛应用,有望为我国更多领域研究提供更强有力的技术支撑。     

锗元素测定方法综述

锗在国防工业、航空航天和通信等领域中的战略性,锗含量的测定对于保证材料质量和满足国际标准至关重要。本文综述了锗含量测定方法的多种技术,包括分光光度法、原子荧光光谱法、原子吸收光谱法、电感耦合等离子体原子发射光谱法、电感耦合等离子体质谱法以及滴定法。在每个检测方法的介绍中,详细探讨了方法的原理、前处理步骤以及应用范围,并分别总结了各个方法的优势和不足。最后,强调了锗含量测定方法的意义,特别是在满足出口监管和促进科学研究方面的作用。同时对锗元素的测定方法进行了展望,为未来的发展提供了参考方向。     

水体透射光谱结合主成分分析(PCA )改进化学需氧量(COD)含量估算研究

化学需氧量（Chemical Oxygen Demand,COD）是水体有机污染的一项重要指标,化学需氧量越高,表示水污染程度越严重。 为了解决传统的COD测量方法耗时较长,不利于快速、实时地获取水体中COD的信息等问题。本文提出了基于透射光谱测量结合主成分分析(Principal Component Analysis, PCA)改进水体COD含量估算模型。具体的,采集100组COD水体光谱信息,分别使用3种不同的高光谱数据预处理方法对光谱数据进行预处理,分析不同预处理方法对模型精度的影响,并基于不同的预处理方法分别建立高斯过程回归模型(Gaussian Process Regression, GPR)和BP神经网络模型,分析不同预处理方法对模型精度的影响;并对各模型结合PCA数据降维方法进行模型的改进,通过比较模型的精度选择最优模型进行水体COD含量的检测。结果显示,相比于原始光谱数据建立的GPR模型和BP神经网络模型,数据预处理后的模型精度明显提升;且结合PCA对预处理后的数据进一步降维处理后,模型精度得到了进一步的提升。其中,基于标准正态变量变换特征结合PCA改进BP神经网络模型基于PCA改进的BP神经网络模型R^2高达0.9940,均方根误差RMSE为0.022540。证明了基于PCA改进的BP神经网络数据降维方法对预处理后的光谱数据进行降维处理,有利于去除光谱中的冗余信息,提取特征信息,可以实现高光谱检测方法可以实现COD含量估算模型的优化,从而为传统COD测量方法存在的问题提出了一种新的解决思路。     

基于四水听器的充水弹性管声速测量方法*

实验室中水声材料声学参数的测量主要在水声声管中进行。管内平面波声速是正确测量这些参数的基础。该文提出一种基于四水听器结合不同边界的测量充水弹性管中声速的新方法。该方法利用4个固定位置处的水听器,采用最小二乘的方法,使得两组水听器分别得到的声管末端入射波声压差值的平方最小的声速即为管内平面波声速。该方法利用单频信号,在每一频率点均可测得声速,可以在任一种声管末端边界下进行测量,同时无需知道各水听器到边界的精确距离,在文中的3种边界下声速测量结果具有很好的一致性,实验操作简单、误差很小。该方法的仿真结果与管内声速的理论值吻合得很好,同时实验测量结果与仿真值之间的误差很小,证明了方法的准确性以及鲁棒性,为声管声速测量提供一个很好的思路。     

Highly Effective Proton-Conduction Matrix-Mixed Membrane Derived from an -SO3H Functionalized Polyamide

Developing a low-cost and effective proton-conductive electrolyte to meet the requirements of the large-scale manufacturing of proton exchange membrane (PEM) fuel cells is of great significance in progressing towards the upcoming “hydrogen economy” society. Herein, utilizing the one-pot acylation polymeric combination of acyl chloride and amine precursors, a polyamide with in-built -SO₃H moieties (PA-PhSO₃H) was facilely synthesized. Characterization shows that it possesses a porous feature and a high stability at the practical operating conditions of PEM fuel cells. Investigations of electrochemical impedance spectroscopy (EIS) measurements revealed that the fabricated PA-PhSO₃H displays a proton conductivity of up to 8.85 × 10⁻² S·cm⁻¹ at 353 K under 98% relative humidity (RH), which is more than two orders of magnitude higher than that of its -SO₃H-free analogue, PA-Ph (6.30 × 10⁻⁴ S·cm⁻¹), under the same conditions. Therefore, matrix-mixed membranes were fabricated by mixing with polyacrylonitrile (PAN) in different ratios, and the EIS analyses revealed that its proton conductivity can reach up to 4.90 × 10⁻² S·cm⁻¹ at 353 K and a 98% relative humidity (RH) when the weight ratio of PA-PhSO₃H:PAN is 3:1 (labeled as PA-PhSO₃H-PAN (3:1)), the value of which is even comparable with those of commercial-available electrolytes being used in PEM fuel cells. Additionally, continuous tests showed that PA-PhSO₃H-PAN (3:1) possesses a long-life reusability. This work demonstrates, using the simple acylation reaction with the sulfonated module as precursor, that low-cost and highly effective proton-conductive electrolytes for PEM fuel cells can be facilely achieved.     

Interfacial Adhesion between Fatty Acid Collectors and Hydrophilic Surfaces: Implications for Low-Rank Coal Flotation

Fatty acids, which are enriched in vegetable oil, have attracted much attention in low-rank coal flotation because of their unique chemical structure. In this study, density functional theory calculations, molecular dynamics simulations, and atomic force microscopy were employed to investigate the adsorption structure and forces between collectors and hydrophilic surfaces. The results show that fatty acids can be easily adsorbed onto surfaces through hydrogen bonds, and can cover the oxygen sites. The existence of hydration film on hydrophilic surfaces prevented nonpolar molecules from being able to adsorb, while polar fatty acids could adsorb and expel water molecules. The adhesion force between the RCOOH-terminated probe and the surface appeared in the retraction process, which differed significantly from that of the RCH₃-terminated probe, indicating that polar fatty acids are more suitable as flotation collectors for low-rank coal than nonpolar hydrocarbon oil. The simulation and AFM test revealed the mechanisms of polar fatty acids, and can provide guidance for low-rank coal flotation applications.