利用迈克耳孙干涉仪重建蜡烛火焰温度场

利用教学实验中的迈克耳孙干涉仪,进行蜡烛火焰温度场的测量.对干涉条纹进行了处理和细化,并分别用阿贝尔变换法和环带法对蜡烛火焰的温度场进行了计算,得到蜡烛火焰横截面上温度场的定量结果.     

对物体沿散斑片纵向移动二次曝光全息干涉条纹的诠释

从光学几何关系出发,推导了在平行光照明、物体沿散斑片纵向方向微小移动情况下的一种全息干涉条纹的解释方法.该方法可以根据任一瞬间的条纹间距测量物体的位移,并适用于实时全息监测的定量分析,对全息干涉计量术提供有效的条纹解释方法和物体位移的计算方法.     

干涉条纹边缘检测方法的比较与改进

研究了干涉条纹边缘检测中的Sobel算子和Laplacian算子,针对二者使干涉条纹变粗和模糊的现象,提出了改进的Laplacian算子。该改进算子先对干涉条纹利用Gauss函数进行平滑,然后再作Laplacian变换。实验结果表明,改进的Laplacian算子克服经典算子的不足,获得清晰的条纹边缘,满足了干涉条纹后续处理要求。     

Combined implementing the hole-drilling method and reflection hologram interferometry for residual stresses determination in cylindrical shells and tubes

Main features inherent in simplified approach to residual stresses determination in cylindrical shells and tubes, external diameter of which is not less than 60 mm, by combing the hole-drilling method and reflection hologram interferometry are discussed in detail. Initial experimental information in a form of hole diameter increments in principal stress directions is derived from high-quality reflection holograms recorded near cylindrical objects of intermediate curvature value. Converting measured parameters into required stress values is based on the transition model that corresponds to plane stress conditions of pure membrane type. The technique developed is capable of determining residual stress component values within 5% accuracy in an absence of stress gradients over the probe hole diameter when a type of residual stress field corresponds to the transition model adopted. The accuracy analysis involved is based on matrix formulation of conventionally direct problem and an assumption on a pure membrane character of residual stress field under study for thin-walled shell. Required error estimations in a case of inspecting thick-walled cylindrical tube are obtained by combining the above-mentioned approach and an analogy of reconstructed fringe patterns with actual and artificial interferograms, which follow from drilling blind hole of the same geometrical parameters in thick-walled plates. Experimental verification of the developed approach is founded upon a determination of actual stresses in thin-walled cylindrical shell and obtaining residual stress distributions at the proximity of welded joint in thick-walled cylindrical tube.     

A semi-automatic method for measuring interferometry fringes: prototype design and first results

A device for automatically obtaining the information contained in holographic interferometry fringes is proposed. The method may be applied to any kind of interferometric fringes. Accuracy has been demonstrated by contrasting the results obtained with our prototype system and those with the single-beam speckle interferometry technique for the measurement of displacements in a plane. The results show good correlation between the two series of measurements.     

Two-dimensional cell parameters measurement of nematic liquid crystal using optical interferometry and Fourier transform fringe analysis technique

We report a method for the measurement of nematic liquid crystal (NLC) cell parameters i.e., switching voltage, birefringence, retardation, dielectric anisotropy, average tilt angle and change in refractive index with applied DC voltage to LC material. The proposed method is based on optical interferometry and Fourier transform fringe analysis technique, in which we obtain 2-dimensional (2D) phase map of the interferograms as a function of applied voltage. Mach-Zehnder interferometer (MZI) was used for the study of cell parameters and interferograms were recorded at different applied DC voltages to NLC cell using CCD camera. From the phase map, 2D-refractive index distribution of the LC cell with applied voltage was reconstructed. Analytical equations are derived based on optical interferometry and then solved to obtain cell parameters. The present method is fast and can give 2D-cell parameters from only two quick interferograms.     

A novel fringe adaptation method for digital projector

Aimed to obtain high-quality sinusoidal fringe projection, a new method to correct the output fringe of digital projector is presented. The method is based on the proposed fringe transform model, which describes the relationship of the input and output fringe pattern. Firstly, a series of fringe patterns are projected and from the fringe images, the transform function is calculated by the pattern shifting method. At last, by modifying the input fringe pattern, a standard sinusoidal output fringe can be achieved. Different from the previous methods, the waveform nonlinearity is estimated by varying the intensity of the projected fringe pixel by pixel; thus the waveform nonlinearity can be estimated precisely and the time cost is considerably reduced. Experimental results show that by modification of the input projection patterns the projector can project fringe with high-quality sinusoidal waveform leading to high performance of the projection system.     

CCD激光测距实验

CCD激光测距实验是集光、机、电为一体的综合性实验，学生可以用简单的几何光学知识、采用激光遥感方式实现距离的非接触精确测量．本文简述了实验原理，给出了计算机自动处理和显示的系统硬件和软件环境，以及系统的校准方法，最后介绍了模拟实验结果。     

一种通过改进Canny算子提取光弹条纹骨架线的方法

光弹性法是确定应力集中系数的有效手段，在实际工程中应力参数都是通过分析光弹干涉条纹图获得的，由于光弹干涉条纹图的复杂性，且影响成像质量的因素较多，因此如何从光弹干涉条纹图中撇开其复杂性，较高精度的提取骨架线，是一项较困难的工作，本文提出一种由改进的Canny算子对条纹方位图进行直接运算提取光弹条纹骨架线的算法，实验表明此方法对光弹条纹图很有效。     

彩色光弹性干涉影像分析系统

自行开发的“彩色光弹性干涉影像分析系统”首先利用CCD成像和图像采集设备,将光弹图像以数字图像的形式存储到计算机,然后通过对存储的光弹图像进行处理,得到物体边界、等差线、等倾线等数据。最后根据这些数据,绘制出主应力迹线,并进行二维的和三维的应力分析。本文着重介绍了系统整体设计以及系统研制的难点问题(彩色光弹图像处理、主应力迹线的绘制等)。系统可以通过对彩色图像进行分解,应用目前已经比较成熟的灰度光弹图像处理技术,来完成彩色图像的处理;也可以直接应用彩色信息来确定条纹级数,进行相关处理。彩色图像能够比灰度图像提供更精确的图像信息,以满足高精度测量的要求。