用电子散斑干涉法测量材料热膨胀系数

 利用双光束电子散斑干涉法（ESPI）对试件受热变形进行了实时观测，针对一次实验过程中得到的图片较多（300～500幅）的特点，在图像处理时摒弃了以往的手动识别等位移线的办法，用MATLAB语言编写了批处理程序，能够在采集的大量散斑图片中自动快速准确地标定等位移线，得到相应的位移和应变，并结合实时测量的温度值，获得了45钢和LY12铝合金在不同温升率下的热膨胀系数及其随温度的变化。实验结果表明，在涉及的温升率范围内，温升率的改变对材料热膨胀系数的影响不明显，材料的热膨胀系数随温度的升高略有上升。     

Digital Interferometric Measurement of Forced Convection Heat Transfer in a Miniature Rectangular Channel

Investigations have been performed on convective heat transfer in water flowing through mini-channels using the non intrusive technique of laser interferometry coupled with digital image processing. Optical glass channels, fabricated with metallic heating surfaces, were studied using a Mach-Zehnder interferometer configuration. Fringe patterns captured using a high-sensitivity CCD camera were analyzed digitally based on a calculation method developed for the liquid medium. Results of parametric studies were compared and contrasted with relevant theoretical solutions from the literature. Indication of the onset of turbulence at Reynolds numbers smaller than the conventional transition Reynolds number for large channels has also been noticed in the experimental investigation.     

Comparison of scale factor estimators for ultrasonic temperature monitoring: Application to structural health monitoring

In Structural Health Monitoring (SHM) of materials, estimating the effects of environmental and operational conditions such as temperature is important. Indeed, temperature changes induce modifications of the mechanical properties of the material and therefore cause a dilation of the acoustic signals characterized by a scale factor. This paper described four scale factor estimators able to monitor changes in temperature: The short-time cross-correlation (STXC) method, the stretching method (STRE), the Minimum Variance Based Estimator method (MVBE) and the Scale Transform Based Estimator method (STBE). The first two methods have already been assessed in the literature while the latter two have been specifically developed for this study. First, closed-form for the Cramer-Rao bound on the estimates of the scale factor, from a simplified deterministic signal, are derived and simplified expressions are given. Then, a statistical evaluation of the quality of estimates is conducted through Monte-Carlo simulations using synthetic signals, based on a model taking into account the influence of temperature. A raw estimate of the computational complexity of signal processing methods also completes this evaluation phase. Finally, the experimental validation of estimation methods is conducted on an aluminum plate subjected to temperatures variations in a controlled thermal environment. The temperature estimates are then faced with an analytical model describing the material behavior.     

Investigation of a UV-laser generated waveguide in a planar polymer chip using an improved interferometric method

Polymeric integrated-optical waveguides are prepared in a planar polymer chip by UV-laser lithographic methods. The waveguide samples are irradiated by an excimer laser at a wavelength Λ=248 nm with various irradiation parameters (different fluencies and irradiation doses). Mach-Zehnder interferometer is employed and the refractive index depth profiles of the waveguide samples are obtained. This profile covers two regions having exponential and Gaussian shapes. The model field distributions strongly depend on the refractive index of each region. The mode field distribution and the effective mode indices for each region have been calculated on the basis of a theoretical model and the experimentally measured data.     

Extreme beam attenuation in double-slit experiments: Quantum and subquantum scenarios

Combining high and low probability densities in intensity hybrids  , we study some of their properties in double-slit setups. In particular, we connect to earlier results on beam attenuation techniques in neutron interferometry and study the effects of very small transmission factors, or very low counting rates, respectively, at one of the two slits. We use a “superclassical” modeling procedure which we have previously shown to produce predictions identical with those of standard quantum theory. Although in accordance with the latter, we show that there are previously unexpected new effects in intensity hybrids for transmission factors below a?10⁻⁴$a?10^{-4}$, which can eventually be observed with the aid of weak measurement techniques. We denote these as quantum sweeper effects, which are characterized by the bunching together of low counting rate particles within very narrow spatial domains. We give an explanation of this phenomenology by the circumstance that in reaching down to ever weaker channel intensities, the nonlinear nature of the probability density currents becomes ever more important, a fact which is generally not considered–although implicitly present–in standard quantum mechanics.     

大口径离轴凸非球面系统拼接检验技术

针对大口径离轴凸非球面面形检测的困难,本文将光学系统波像差检验技术与子孔径拼接干涉技术相结合,提出了凸非球面系统拼接检测方法。对该方法的基本原理和具体实现过程进行了分析和研究,并建立了合理的子孔径拼接数学模型。当离轴三反光学系统的主镜和三镜加工完成以后,对整个系统进行装调和测试,并依次测定光学系统各视场的波像差分布,通过综合优化子孔径拼接算法和全口径面形数据插值可以求解得到大口径非球面全口径的面形信息,从而为非球面后续加工和系统的装调提供了依据和保障。结合工程实例,对一口径为287 mm×115 mm的离轴非球面次镜进行了系统拼接测试和加工,经过两个周期的加工和测试,其面形分布的RMS值接近1/30λ(λ=632.8 nm)。     

基于二氧化硅胶体晶体薄膜和反射干涉光谱的蛋白冠监测方法

生物分子与纳米材料作用形成的"蛋白冠"影响纳米材料的物理和化学性质,目前缺少有效的原位实时技术监测蛋白冠的形成过程.本研究基于二氧化硅胶体晶体薄膜和反射干涉光谱法,研究了三种代表性血液蛋白质在二氧化硅纳米粒子表面的蛋白冠形成过程,结果表明这三种蛋白具有不同的蛋白冠形成过程及参数;研究了人血清白蛋白在三种表面曲率的二氧化...     

移相器微位移旋转误差的分析及测试

以压电陶瓷(PZT)微位移器为主要研究对象, 引入一种处理静态干涉图的新方法--虚光栅移相叠栅条纹法,设计实验对一台实际使用的移相器微位移旋转误差进行测试研究,对其引起的波面旋转情况进行了定量的计算分析,并给出测试结果.用虚光栅移相叠栅条纹法处理实验中加有载频的干涉图时,不需要使用任何移相器件,可以进行动态位相的检测,整个移相过程用计算机进行控制,避免了引入额外的移相误差.