一种确定均匀动脉壁面切应力的非线性方法

从Ling和Atabek提出的``局部流'理论出发，提出一种利用测量血液黏度、管轴上 的血流速度、压力和管径波形计算均匀动脉管壁切应力的非线性方法. 将这种方法与柳兆荣 等提出的利用测量血液黏度、管轴上的血流速度和平均管径计算切应力的线性方法比较，结 果表明，当管壁脉动幅度较小时，两种方法计算的压力梯度、流速剖面和管壁切应力差别较 小；而当管壁脉动幅度增大时，两种方法计算的压力梯度、流速剖面和管壁切应力差别增大. 对于小幅脉动均匀动脉，用线性方法计算管壁切应力有较高的精度；而对于大变形 均匀动脉，则需要考虑非线性因素对管壁切应力的影响. 由于作为输入量的血液黏度、轴心 血流速度、压力波形和管径波形可在活体上通过无损伤或微损伤的检测方法得到， 所提出的计算切应力的方法为在体或离体研究切应力与动脉重建的关系提供了方法学基础.     

A SIMPLIFIED CALCULATING METHOD OF NONLINEAR FREQUENCY OF CABLE NET UNDER MEAN WIND LOAD

The cable net supported glass curtain wallas the most advanced technique in dot point supported glass curtain wall, is widely used in China. Because of its large deflection and high nonlinearity under wind load, the dynamic performance of the cable net is greatly different from that of the conventional linear structures. The continuous membrane theory is used to construct the nonlinear vibration differential equation of the cable net, and the harmonic balance method is used to solve the analytic formula of the nonlinear frequency. In order to verify the accuracy of the above analytic formula, the results of the formula and the nonlinear FEM time-history method are compared and found to be in good agreement. Furthermore, the nonlinear vibration differential equation and the nonlinear frequency obtained in this paper are the basis for the wind-induced response analysis of a cable net under fluctuating wind load.     

气粒混合物非灰辐射特性合并宽窄谱带K分布模型

气粒混合物辐射问题具有全场性、非灰性、耦合性等特点,准确预估高温燃气/粒子非灰辐射特性是非常重要的。本文将合并宽窄谱带K分布模础(CWNBCK)与离散坐标法(DOM)结合,开展了非灰气粒混合物辐射换热问题的模拟工作,分别验证了一维和三维情况下应用该模型的准确性,给出不同工况下的热流源项、壁面热流或辐射热流等。结果表明:该模型能够给出与SNB模型精度基本相同的结果,考虑其计算效率的提高,可以在工程实际中应用该模型计算非灰气粒混合物辐射换热。     

二维非结构网格有限体积格式的壁热现象和人工热流方法

基于Noh人工热流方法的思想,推导出任意多边形网格人工热流的格式,将Noh的结构网格人工热流方法推广到任意多边形非结构网格的拉氏有限体积方法中,抑制或消除了壁热现象.几个数值实验,包括Noh激波反射问题和两块钢金属碰撞问题,验证了方法的可行性.     

光磁共振实验中壁弛豫过程与外磁场的关系

利用改进后的DH807型光磁共振实验装置,在静态磁场下精确测量了抽运信号的弛豫饱和值与外磁场的关系,从而得到壁弛豫速率与外磁场的关系,并建立模型对其原理进行了探讨.     

Free (open) boundary condition: some experiences with viscous flow simulations

The free (or open) boundary condition (FBC, OBC) was proposed by Papanastasiou et al. (A new outflow boundary condition, International Journal for Numerical Methods in Fluids, 1992; 14:587–608) to handle truncated domains with synthetic boundaries where the outflow conditions are unknown. In the present work, implementation of the FBC has been tested in several benchmark problems of viscous flow in fluid mechanics. The FEM is used to provide numerical results for both cases of planar and axisymmetric domains under laminar, isothermal or non‐isothermal, steady‐state conditions, for Newtonian fluids. The effects of inertia, gravity, compressibility, pressure dependence of the viscosity, slip at the wall, and surface tension are all considered individually in the extrudate‐swell benchmark problem for a wide range of the relevant parameters. The present results extend previous ones regarding the applicability of the FBC and show cases where the FBC is inappropriate, namely in the extrudate‐swell problem with gravity or surface‐tension effects. Particular emphasis has been given to the pressure at the outflow, which is the most sensitive quantity of the computations. In all cases where FBC is appropriate, excellent agreement has been found in comparisons with results from very long domains. The formulation for Picard‐type iterations is given in some detail, and the differences with the Newton–Raphson formulation are highlighted regarding some computational aspects. Copyright © 2011 John Wiley & Sons, Ltd.     

DNS of backward‐facing step flow with fully turbulent inflow

Direct numerical simulation (DNS) has been performed to study the channel flow over a backward‐facing step at a Reynolds number Re_b=5600 based on the step height h and the inflow bulk velocity U_b. A dynamic method has been used in order to generate realistic turbulent inflow conditions. The results upstream of the step compared well with the fully developed channel flow. Downstream of the step our results show excellent agreement with experimental data. Copyright © 2009 John Wiley & Sons, Ltd.     

Compressed exponential form for disordered domain wall motion in ultra-thin Au/Co/Au ferromagnetic films

Magnetization reversal in ultra-thin Au/Co/Au films deposited on single crystal silicon (1 0 0) was investigated using Kerr microscopy. In the considered ultra-thin Co films, with a thickness between 0.7 and 1 nm, the coercivity and magnetic anisotropy decrease with decrease in cobalt layer thickness and the magnetization reversal dynamics is dominated by disordered domain wall motion. An analysis of the observed magnetization reversal dynamics is proposed, starting from the Fatuzzo-Labrune model. We show that the relaxation curves of these samples are well described by a function obtained by a technical transformation of Fatuzzo-Labrune model in the regime dominated by domain wall motion.     

墙体对微波脉冲的衰减特性

 研究墙体对微波脉冲的衰减特性，测量了微波脉冲垂直入射墙体后的脉冲信号，经过计算得到普通砖混墙、普通钢筋混凝土墙、钢筋网混凝土墙对窄带微波和超宽带微波的衰减值；分析了微波脉冲穿越不同墙体的频谱变化。研究结果表明，普通钢筋混凝土墙和普通砖混墙对窄带微波脉冲的衰减为0.342～0.699 dB/cm，对超宽带信号的衰减为0.134～0.183 dB/cm。钢筋网混凝土墙（厚65 cm）对超宽带信号的衰减较大（29.07～45.79 dB），同时使穿透墙体的超宽带信号频率分布向高频位移。