宽体液腔Janus-Helmholtz换能器

本文使用有限元方法对宽体液腔Janus-Helmholtz(JH)换能器进行了仿真分析,得出了壳体宽度拓展增量对JH换能器工作性能的影响规律。使用三维建模的方式,分析了连接部分对换能器性能的影响及宽体壳体的的模态,证明了三维建模的必要性。依据仿真优化结构设计了一款宽体液腔JH换能器并进行了湖上测试。最终测试结果与仿真结果有很好的一致性,相较直筒JH换能器其谐振频率降低300Hz,发射电压响应最高可达144dB。     

Influence of the torsional vibration of the periodically attached perpendicular beam resonator on the flexural band of a Euler-Bernoulli beam

The bending and torsional vibration of the periodic perpendicular cantilever beam-mass resonators (PCBMR) is idealized as translational and rotational oscillators attached to the main beam. In this paper, the effect of that torsional vibration of the PCBMR on the dynamics of an infinitely long Euler-Bernoulli beam is evaluated. The band-structure is explored by implementing the transfer matrix method in conjunction with Bloch-Floquet's theorem. The combination of the translational and rotational oscillator modifies the relative position of the coupling coefficient in the transfer matrix, which plays a pivotal role in the band-gap formation. The flexural band-structure is highly sensitive to the torsional vibration while the radius of gyration of the tip mass is considerably higher than the length of the PCBMR. Ill-tuning leads to split and reduction of attenuation band to 50%; whereas, around 38% elongation of the attenuation band in the low frequency regime can be achieved by proper tuning.     

双稳态结构中的1/2次谐波共振及其对隔振特性的影响

以典型的双稳态系统——屈曲梁结构为例,基于等效模型,结合解析、数值和实验手段,研究了双稳态结构中的1/2次谐波共振特性、演化过程、参数调节规律及其对隔振特性的影响.研究发现,当非线性刚度系数或激励幅值增加到一定程度时,系统会在一定带宽下产生显著的1/2次谐波共振;随着激励幅值增加,阻尼系统的1/2次谐波遵循“产生-增强-衰退-消失”的过程,该过程对峰值频率和峰值传递率有重要影响;适当提高非线性强度能有效改善双稳态结构隔振特性.针对双稳态屈曲梁结构开展的实验验证了1/2次谐波特性和隔振特性变化规律.     

Design of a tuned vibration absorber for a slender hollow cylindrical structure

Abstract

In this paper, details of the design work for a tuned vibration absorber to be used on a hollow cylindrical structure is presented. The vibration problem is of resonant type and the tuned vibration absorber is designed to suppress the displacement vibration response of the free end of the slender hollow structure dominated by the contribution of its lowest transverse vibration modes. The structure is modeled using a commercial finite element software. Finite element model of the structure is verified using experimentally obtained frequency response functions and modal parameters. Effective parameters of the tuned vibration absorber design are then determined based on finite element analysis simulations of the vibration suppression performance of the tuned vibration absorber as it is used on the structure. Details of the tuned vibration absorber design are determined and a prototype is fabricated. Prototype tuned vibration absorber is then characterized experimentally both as a standalone system and also as it is used on the main structure. Vibration reduction performance of the physical prototype of the tuned vibration absorber is also compared with its vibration reduction performance estimated from finite element analysis simulations so that the analysis based design process can be validated.

Communicated by Dumitru Caruntu.     

Order,disorder, and geometrical information indices of molecules

Structural features of various molecular systems with symmetry of point groups ranging fromC ₁ to the icosahedral symmetry are analyzed in the framework of the model suggested previously for the evaluation of order and disorder in the arrangement of atoms in a molecule based on the equationQ = I -P/3n (whereQ is the index of order, andP is the number of independent coordinates needed to fix ann-atomic molecule in the Cartesian coordinate system). TheQ value depends on various structural parameters of the molecule: the number of atoms in it, the symmetry, the dimensionality, and the number of structural degrees of freedom. The disorder indexP/3n = 1 -Q correlates with Shannon's entropy of information, andQ correlates with negentropy or excess information; this makes it possible to useP/3n as a new geometrical information molecular index that is obtained by a nonprobabilistic method. Analysis of the relationship between order and chaos in molecular systems, as well as of the specific order indexq =Q/n, makes it possible to identify both general and specific features of molecules.Translated from Izvestiya Akadernii Nauk. Seriya Khimicheskaya, No. 8, pp. 191219-121927, August, 1996.     

香豆素343敏化TiO2纳米粒子光致电子转移的荧光和拉曼光谱

通过对香豆素343(C343)染料敏化TiO₂纳米粒子光致电子转移的荧光和拉曼光谱特性的研究表明,C343染料敏化TiO₂纳米粒子稳态吸收光谱和稳态荧光光谱的红移归因于从被吸附的C343染料分子激发态和C343/TiO₂复合物到TiO₂纳米粒子导带的光致电子转移. 由时间分辨荧光光谱确定了C343染料敏化TiO₂纳米粒子的逆向电子转移速率常数为τ₁=31 ps. C343 染料敏化TiO₂纳米粒子体系拉曼光谱的研究表明, 被吸附在界面处的染料分子主链碳键的伸缩振动和碳环的呼吸运动的振动模式对超快界面光致电子转移有着重要的促进作用.     

钛酸铅和钛酸钡振动性质及铁电相变的密度泛函理论研究

采用密度泛函赝势的方法, 研究了不同晶相的钛酸铅和钛酸钡的振动模式. 没有发现钛酸铅存在低温相变的证据, 而钛酸钡则存在四方-正交和正交-三角铁电相变. 振动频率随四方应变的变化关系表明, 随着四方应变的增大, 软模的频率增大, 在某一个临界点, 不稳定的软模转变为稳定的振模. 由于钛酸铅具有较大的四方应变, 使得其能够在四方相稳定下来, 而钛酸钡较小的四方应变是其仍能够发生低温铁电相变的一个重要原因.     

基于声子晶体带隙特性的薄板减振设计

基于平面波展开法和薄板振动方程,计算了薄板型声子晶体的带隙和减振特性,通过与有限元软件的计算结果验证带隙计算的正确性,并进一步讨论了散射体几何形状及填充率、弹性模量比、密度比等对薄板型声子晶体带隙特性和减振的影响.结果表明正多边形散射体随边数的减小,第一带隙宽度逐渐增加,正方形散射体薄板减振效果明显.填充率对声子晶体带隙特性的影响不是线性的.随散射体基体弹性模量比数量级增大,第一带隙趋于低频,宽度降低.散射体基体弹性模量比较大时,密度比越大,第一带隙宽度越大,对应的薄板结构减振特性越好.     

石英晶体板非线性高频振动的拓展伽辽金法分析

针对考虑几何和材料非线性的石英晶体板厚度剪切振动和弯曲振动的方程组,利用扩展伽辽金法对该方程组进行转化和求解,分别获得了强烈耦合的厚度剪切振动模态和弯曲振动模态的频率响应关系,绘制了不同振幅比和不同驱动电压影响下的频率响应曲线图。数值计算结果表明可以选取石英晶片的最佳长厚比尺寸来避免两种模态的强烈耦合。驱动电压的变化将引起石英晶体谐振器厚度剪切振动频率的明显改变,必须将振动频率的漂移值控制在常用压电声波器件的允许值之内。扩展伽辽金法对石英晶体板非线性振动方程组的求解为非线性有限元分析和偏场效应分析奠定了基础。     

单桩竖向动力阻抗计算模型研究

运用土动力学和结构动力学原理,同时考虑桩周土的弱化效应和桩-土界面的相对滑移效应,利用数理方程方法分别求解单桩与桩周近场土域及远场土域的振动方程,建立了竖向荷载作用下单桩动力阻抗函数的简化计算方法,提出了一种改进的非线性动力Winkler模型,确定了模型中各物理元件的参数,进而通过对比分析验证了计算模型的合理性,从而为桩-土-上部结构耦合系统的非线性分析奠定了基础。