Analysis of combined conduction and radiation heat transfer in presence of participating medium by the development of hybrid method

The current study addresses the mathematical modeling aspects of coupled conductive and radiative heat transfer in the presence of absorbing, emitting and isotropic scattering gray medium within two-dimensional square enclosure. A blended method where the concepts of modified differential approximation employed by combining discrete ordinate method and spherical harmonics method, has been developed for modeling the radiative transport equation. The gray participating medium is bounded by isothermal walls of two-dimensional enclosure which are considered to be opaque, diffuse and gray. The effect of various influencing parameters i.e., radiation-conduction parameter, surface emissivity, single scattering albedo and optical thickness has been illustrated. The adaptability of the present method has also been addressed.     

基于扩散势能和自由体积的自扩散系数模型

在考虑自由体积和局部临界扩散势能的基础上,提出一种新的计算自扩散系数模型,并给出新模型中各个因子物理含义．同时还提出一种计算局部临界扩散势能的新方法,并应用于新模型．另外将衍生van der Waals状态方程应用于求解自由体积,式中所需径向分布函数由Morsali-Goharshadi方程得到．在相同条件下,新模型比原自由体积模型更准确．     

Atomistic packing models for experimentally investigated swelling states induced by CO2 in glassy polysulfone and poly(ether sulfone)

Atomistic packing models have been created, which help to better understand the experimentally observed swelling behavior of glassy polysulfone and poly (ether sulfone), under CO₂ gas pressures up to 50 bar at 308 K. The experimental characterization includes the measurement of the time‐dependent volume dilation of the polymer samples after a pressure step and the determination of the corresponding gas concentrations by gravimetric gas‐sorption measurements. The models obtained by force‐field‐based molecular mechanics and molecular dynamics methods allow a detailed atomistic analysis of representative swelling states of polymer/gas systems, with respect to the dilation of the matrix. Also, changes of free volume distribution and backbone mobility are accessible. The behavior of gas molecules in unswollen and swollen polymer matrices is characterized in terms of sorption, diffusion, and plasticization. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1874–1897, 2006     

Surface free energy of CrNx films deposited using closed field unbalanced magnetron sputtering

CrN_x thin films have attracted much attention for semiconductor IC packaging molding dies and forming tools due to their excellent hardness, thermal stability and non-sticking properties (low surface free energy). However, few data has been published on the surface free energy (SFE) of CrN_x films at temperatures in the range 20-170 °C. In this study CrN_x thin films with CrN, Cr(N), Cr₂N (and mixture of these phases) were prepared using closed field unbalanced magnetron sputtering at a wide range of Cr⁺² emission intensity. The contact angles of water, di-iodomethane and ethylene glycol on the coated surfaces were measured at temperatures in the range 20-170 °C using a Dataphysics OCA-20 contact angle analyzer. The surface free energy of the CrN_x films and their components (e.g., dispersion, polar) were calculated using the Owens-Wendt geometric mean approach. The influences of CrN_x film surface roughness and microstructure on the surface free energy were investigated by atomic force microscopy (AFM) and X-ray diffraction (XRD), respectively. The experimental results showed that the lowest total SFE was obtained corresponding to CrN at temperature in 20 °C. This is lower than that of Cr(N), Cr₂N (and mixture of these phases). The total SFE, dispersive SFE and polar SFE of CrN_x films decreased with increasing surface temperature. The film roughness has an obvious effect on the SFE and there is tendency for the SFE to increase with increasing film surface roughness.     

A mathematical model of the ring-spinning process

This paper develops a mathematical model of the ring-spinning process that takes into account its non-stationary nature. A complex system of differential equations is obtained, which from a mathematical point of view constitutes a ‘free-boundary’ problem. Its solution involves definition of suitable boundary conditions related to the mechanical characteristics of the process and of the spinning machine itself. The boundary conditions which determine the solution are pointed out. A numerical solution of the system of differential equations can be obtained by the Finite-Segments method, as shown in an example.     

HIGH ACCURACY FINITE VOLUME ELEMENT METHOD FOR TWO-POINT BOUNDARY VALUE PROBLEM OF SECOND ORDER ORDINARY DIFFERENTIAL EQUATIONS

1　ＩｎｔｒｏｄｕｃｔｉｏｎＦｉｎｉｔｅｖｏｌｕｍｅｅｌｅｍｅｎｔｍｅｔｈｏｄｏｒＦＶＥＭｕｓｅｓａｖｏｌｕｍｅｉｎｔｅｇｒａｌｆｏｒｍｕｌａｔｉｏｎｏｆｔｈｅｄｉｆ ｆｅｒｅｎｔｉａｌｅｑｕａｔｉｏｎｗｉｔｈａｆｉｎｉｔｅｐａｒｔｉｔｉｏｎｉｎｇｓｅｔｏｆｖｏｌｕｍｅｔｏｄｉｓｃｒｅｔｉｚｅｔｈｅｅｑｕａｔｉｏｎ ,ｔｈｅｎｒｅ ｓｔｒｉｃｔｓｔｈｅａｄｍｉｓｓｉｂｌｅｆｕｎｃｔｉｏｎｓｔｏａｌｉｎｅａｒｆｉｎｉｔｅｅｌｅｍｅｎｔｓｐａｃｅｔｏｄｉｓｃｒｅｔｉｚｅｔｈｅｓｏｌｕｔｉｏｎ ([1 -4 ] ) .…     

有限体积KFVS方法在二维溃坝中的应用

本文采用了基于KFVS格式的有限体积方法 (FVM)求解了控制水流运动的二维浅水方程 ,建立了二维水坝瞬间溃坝的洪水演进模型 .并应用此模型模拟了二维非对称溃坝和对称溃坝情形下坝左下角有障碍物时的洪水波演进过程 .模拟结果表明该数学模型对二维浅水运动的模拟很有效 .     

与单形外接球心有关的一个不等式

若n维单形A＝A1A2…An r的外接球心O位于其内部，单形A与单形Ai＝A1A2…Ai-1OAi 1…An 1的外接球半径分别为R与Ri(i=1,2,…,n 1），本文证明了：n 1↑П↑i=1Ri≥(nR/2)^n 1，而等号成立的充分必要条件为单形A正则。     

The effect of crystallinity on chain mobility and free volume in the amorphous regions of a miscible polycarbonate/polyester blend

Homopolymers and blends of polycarbonate/ThermX have been investigated by differential scanning calorimetry, dynamic mechanical analysis, density measurements, and positron annihilation lifetime spectroscopy. The study focuses on the chain mobility and free volume in the amorphous miscible regions of the blends and how this mobility and free volume are affected by increasing crystallinity. It is proposed that judicious annealing, which results in increasing crystallinity (while avoiding ageing or transesterification), induces a constraint on the amorphous region leading to an increase in T_g and coalescence of free volume sites. © 1994 John Wiley & Sons, Inc.