SiO2/α-FeOOH和SiO2/γ-Fe2O3微粒的界面研究

α－FeOOH微粒由于其表面高活性，在转变成γ－Fe2O3的热处理过程中容易烧结，一旦这种烧结现象发生，得到的γ－Fe2O3磁粉磁性能大大下降[1]．为了克服这一困难，目前采用在α-FeOOH微粒表面包敷有机物[2]和无机物[3]来隔离颗粒，阻止其聚集．其中SiO2表面包敷处理是最令人感兴趣的研究课题之一[4，5]．SiO2是一种难烙性的非磁性材料，它包敷在α-FeOOH微粒表面外，不仅可提高α－FeOOH转变成γ－Fe2O3的热处理温度，有利于得到外形完好、晶格完整的γ－Fe2O3磁粉，而且由包效层与内核之间的界面相互作用引起的表面各向异性常…     

油溶和水溶性羰基引发剂的光化学

本文回顾了在羰基引发剂的作用下烯烃单体光引发聚合的最新机理。报道了有关多种当前通用的新型羰基引发剂的光物理和光化学的近期工作,其中包括 UV 吸收,发光光谱和闪光光解的研究。还报道了油溶性引发剂对丙烯酸丁酯的光聚合效应。证明油溶性引发剂实质上是经过三重态来起作用,其中包含一个从溶剂中攫取氢的引发步骤。对于硫杂蒽酮衍生物来说,它们从叔胺接受电子的能力及其光聚合效应之间有一定的关系。从闪光光解获得的证据说明在这种情况下存在着自由基阴离子,但是基于二苯酮和苯基酮的引发剂则没有。预料后者直接从胺攫氢是通过三重态羰基或是引发剂的自由基。有证据表明联苯甲酰主要是通过光裂解来起作用。水溶性硫杂蒽酮引发剂的作用主要是经过单重态,其中包含引发时攫氢一步。在这种情况下,自由基的形成不受氧的影响。     

QSPR Modeling of Gibbs Free Energy of Organic Compounds by Weighting of Nearest Neighboring Codes

We examine the encoding of chemical structure of organic compounds by Labeled Hydrogen-Filled Graphs (LHFGs). Quantitative Structure-Property Relationships (QSPR) for a representative set of 150 organic molecules have been derived by means of the optimization of correlation weights of local invariants of the LHFGs. We have tested as local invariants Morgan extended connectivity of zero- and first order, numbers of path of length 2 (P2) and valence shells of distance of 2 (S2) associated with each atom in the molecular structure, and the Nearest Neighboring Codes (NNC). The best statistical characteristics for the Gibbs free energy has been obtained for the NNC weighting. Statistical parameters corresponding to this model are the following n = 100, r² = 0.9974, s = 5.136 kJ/mol, F = 38319 (training set); n = 50, r² = 0.9990, s = 3.405 kJ/mol, F = 48717 (test set). Some possible further developments are pointed out.     

双嵌段共聚物薄膜介观结构的耗散粒子动力学模拟

采用耗散粒子动力学(Dissipative Particle Dynamics, DPD)方法模拟两平行平板间的双嵌段共聚物体系的介观结构. 模拟结果表明, 随板间距的增大, 体系分层数量的增加是不连续的, 在分层数量的增加过程中, 出现不规则结构的过渡区；聚合物链末端距随板间距的增大呈周期性振荡, 振荡幅度逐渐减小. 对模拟结果的分析表明：层状结构转变点与分层数量之间存在近似线性关系；层状结构转变点近似与共聚物链长的2/3次方成正比.     

On the cavitation energy of water

Free-energy-perturbation theory from molecular dynamics calculations has been used to obtain the DeltaG of adjoining cavities' formation in water. The DeltaGs for systems with three, five and seven cavities are compared with that of a single cavity of the same volume, and found to be in good agreement. The conditions under which the analytical formulation of the energy of cavity formation proposed by Pierotti holds are discussed. The data for a single cavity have been tabulated and can lend themselves to a simple numerical implementation in standard quantum chemical packages, which can be used when high accuracy for DeltaG(cav) is required.     

On the Hydrolytic Stability of Organic Ligands in Al-, Ti- and Zr-Alkoxide Complexes

The complexation degrees of Al-, Ti- and Zr-butoxide (M) with unsaturated and saturated -diketones (3-allylpentane-2.4-dione-APD, acetylacetone-ACAC) and -ketoesters (methacryloxyethyl-acetoacetate-MEAA, allylacetoacetate-AAA, ethylacetoacetate-EAA) as organic ligands (L) were examined by IR and ¹³ C NMR spectroscopy and were found to be L:M 1.5. The hydrolytic stability of the ligands of the metal alkoxide complexes (L:M = 1) during hydrolysis/condensation reactions at the molar ratio h (H₂O : OR) = 0.5–2.0 decreases with increasing H$$₂O:complex ratio. Furthermore, the ligand stability depends on the type of metal in the complexes and decreases in the order Al- > Zr- > Ti-butoxide complexes at h=1. The ACAC ligand likewise shows in the Al-, Ti- and Zr-butoxide complexes a high hydrolytic stability (95–100%) at h=1 within 7 days. The Ti- and Zr-butoxide complexes with -ketoesters as ligand show at h=1> a release to a different extent e.g., up to 60% in the case of the MEAA-ligand in the Ti-butoxide complex after 2 days. In general, the hydrolytic stability of the ligands in the Ti-butoxide complexes (L:M = 1, h=1) decreases in the order ACAC > APD > AAA > EAA MEAA. The hydrolysis/condensation reaction of complexes having a weak ligand stability leads to larger particle sizes in the sols than those with stable ACAC ligands. The results contribute to a more controlled synthesis of sols and of new inorganic-organic hybrid polymers via the sol-gel process.     

Use of blowing catalysts for integral skin polyurethane applications in a controlled molecular architectural environment: Synthesis and impact on ultimate physical properties

Polyurethane elastomers of a controlled molecular architecture were synthesized using a two‐step polymerization technique. The building blocks of the elastomeric materials included urea–urethane prepolymers end‐capped with diisocyanate groups and had an exact number of urea groups at both ends. Two‐dimensional bifurcated hydrogen‐bonding networks incorporating the urea groups were, with differential scanning calorimetric and dynamic mechanical thermal analyzer techniques, responsible for the increase in the glass‐transition temperature (T_g) of the hard block and sharp interface morphology between the pure “hard” domains and pure “soft” domains. The higher extent of the phase separation between the two phases contributed to higher elastic moduli for the hard blocks and higher tensile strength for the elastomeric samples. Higher elongation values were attributed to the liberation of the elastomeric chain ends that otherwise would have been constrained in the interface region. The higher T_g values of the hard blocks corresponded to an increase in the hardness values and a decrease in the tear‐strength values. The increase in the amount of urea groups within the hard segments, as a result of the increased amount of water and blowing catalyst, resulted in elastomeric foams with higher open‐cell content. This resulted in lower resilience values as measured using the pendulum rebound test and was attributed to the ability of the open cells to absorb and dissipate energy. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2526–2536, 2002     

Spectroscopic characterization and preparation of low molecular,water‐soluble chitosan with free‐amine group by novel method

Low molecular, water‐soluble chitosan (LMWSC) with a free amine group was prepared by the novel salts‐removal method described in this study. A weight‐average molecular weight and degree of deacetylation (DDA) of LMWSC were determined by viscometry and Kina titration, resulting in 18,579 Da and 93% DDA, respectively. In the Fourier transform infrared spectroscopic, ¹H NMR, and ¹³C NMR spectra the absorption band by the carboxyl group derived from lactic acid and the impurities formed in the enzymatic process disappeared or were significantly lower than that of the control chitosan. Also, from the ¹H NMR and ¹³C NMR spectra the empirical value for the area ratio of the proton and carbon corresponds nearly to its theoretical values. The matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrum identified the difference in the two adjacent peaks as 161. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3796–3803, 2002     

Thermocapillary Alignment of Gas Bubbles Induced by Convective Transport

The effect of a weak convective heat transfer on the thermocapillary interaction of two bubbles with an arbitrary orientation relative to an externally imposed temperature gradient is examined. Asymptotic analysis of the case of large separation distances, Z, suggests that the corrections to the bubbles' velocities are of (Pe/Z²), rather than (Pe²) previously found for an isolated bubble. Equal-sized bubbles are known to move with the same velocities, as if they were isolated, when heat conduction is the only transport mechanism. However, the convective transport results in a relative motion of the bubbles. The tendency of equal bubbles to line up in a plane perpendicular to the applied thermal gradient is shown analytically in the weakly nonlinear limit of small Pe numbers, and an interesting interaction behavior in the case of unequal bubbles is discussed.     

Surface free energies of styrene-acrylic acid copolymer plates prepared in various frames

Styrene (St)-acrylic acid (AA) copolymer plates were synthesized in the frames made of glass, aluminum (Al) and poly(difluoroethylene) (PDFE). Surface properties of the prepared copolymer plates were characterized with regard to critical surface tension ( _C ), chemical components by IR analysis and surface energies (total energy, _S ; dispersion force components, _S ^d ; polar component, _S ^p ; hydrogen bonding component, _S ^h ) and the following results were obtained.The _C values of the copolymer plates increased with AA content and also depended on the sort of the used frame. The increasing order of the _C values of the copolymer plates corresponded to those of the used frames, namely, PDFE frame < Al frame < Glass frame.The prepared copolymer plates with low AA contents (ca. 10 mol%) were enriched in the AA moiety in the surface layer regardless of the kind of the used frame.The total and the individual components of the surface free energies of the copolymer plates were largely affected by the property of the used frame. The glass frame gave the plate with higher _S ^h values suggesting preferential orientation of the polar site of AA component.