Modeling and simulation of free radical polymerization of styrene under semibatch reactor conditions

The first part of this approach is concerned with the elaboration of a radical polymerization model of styrenne, based on a kinetic diagram that includes chemical and thermal initiation, propagation, termination by recombination and chain transfer to the monomer. Furthermore, volume contraction during polymerization is considered, as well as the gel and glass effects. The mathematical formalism that describes the model in terms of moments is explored in detail. The model was then used to predict the changes in monomer conversion and molecular weight after intermediate addition of initiator and monomer. The results of this operation are dependent on the conditions of the reaction mass, quantity, and moment of substance addition. Therefore, the simulations were performed at different times with respect to the gel effect; before, during and after this phenomenon, and also with respect to different temperatures and initiators. Increasing the initiator concentration before the gel effect leads to an earlier appearance of the phenomenon and to a decrease in molecular weight. The ratio reveals a polydispersity index smaller for the intermediate addition of initiator. No significant changes take place during or after the gel effect. If along with the initiator, unreacted monomver (used to dissolve the initiator) enters the reactor, a small dip in conversion is observed. The general conclusion of this paper reveals the intermediate addition of initiator as a method to control polymer properties and to prevent the “dead-end” polymerization of styrene.     

Free energies of transfer of alkali halides from water to urea-water mixtures at 25°C from EMF measurements

The standard potentials_s E ^o of M/M⁺ (M=Li, Na, K, Rb, and Cs) electrodes in aqueous urea solutions containing 12, 20, 30 and 37% by weight of urea have been determined at 25°C from emf measurements on the cell M(Hg)/MCl (m), solvent/AgCl–Ag, from the activities of metals in amalgams by use of a similar type of cell in water, and from the values of_s E ^o of the Ag/AgCl electrode determined earlier. The standard free energies of transfer of MCl, G _t ^o (MCl), from water to the mixed solvents, computed by use of these values and those for the Ag–AgCl electrode, rise sharply from Li⁺ to Na⁺ but fall from Na⁺ to K⁺ and rather sharply from K⁺ to Cs⁺ with a maximum at Na⁺ in all the solvent compositions. This has been attributed to the superimposition of soft-soft interactions on the electrostatic interactions between the ions and the negative charge centers of the possible hydrogen-bonded solvent complexes in the mixed solvents. Comparison of G _t ^o (i) values for individual ions, obtained by a simultaneous extrapolation procedure, with those in aqueous mixtures of methanol,t-butanol, and dimethyl sulfoxide leads to the conclusion that the solvation of these ions in all these solvents is chiefly dictated by the acid-base type of ion-solvent interactions.     

Polymerization of methyl methacrylate in the presence of iron(II) complex with tetradentate nitrogen ligands under conditions of atom transfer radical polymerization

Four tetradentate nitrogen ligands, viz. dichloro{[N,N^′-diphenyl-N,N^′-di(quinoline-2-methyl)]-1,2-ethylene diamine} (1), {[N,N^′-dioctyl-N,N^′-di(quinoline-2-methyl)]-1,2-ethylene diamine} (2), {[N,N^′-dibenzyl-N,N^′-di(quinoline-2-methyl)]-1,2-ethylene diamine} (3), and (1R,2R)-(−)-N,N^′-di(quinoline-2-methyl) di-iminocyclohexane (4), were investigated as novel complexing ligands in iron-mediated atom transfer radical polymerization (ATRP) of methyl methacrylate where ethyl-2-bromoisobutyrate was the initiator in o-xylene at 90 °C. With ligands 1 and 2 the experimental molecular weights increased gradually with monomer conversion. High to moderate conversions (87%, 43%) were obtained in relatively short times (90 min for 1 and 30 min for 2), which indicates an efficient catalyst system, but after these times a dramatic increase in viscosity of the polymerization medium led to loss of control. It is noteworthy that polymerization proceeded in a controlled manner with ligand 1, which has two rather bulky substituents on the N-atom. Such bulky ligands did not work for a copper-based system, where they led to excessive terminations or other side reactions. When the bulkiness of the substituents was significantly increased, as in ligand 3, a decrease in polymerization rate and loss of control occurred. Ligand 4 was less efficient than the other ligands, probably because the ethylene bridge was replaced by cyclohexane bridge.     

Mesoscopic simulation of the aggregation behavior of fluorinated surfactant in aqueous solution

The aggregation behavior of fluorinated surfactant in aqueous solution was investigated using dissipative particle dynamics (DPD) simulation method. Simulation results show that fluorinated surfactants behave mainly as their hydrocarbon analogues, having similar sequences of phases and aggregate structures, which are capable of building micelle, hexagonal phase and lamellar phase. But fluorinated surfactants also show interesting differences from hydrocarbon analogues, which can easily form hexagonal and lamellar structures with comparative little curvature. They can also form ellipsoid or rod-like micelles even in very low concentrations instead of spheroid ones. The dynamic aggregation behavior of fluorinated surfactants, as well as the comparison with hydrogenated ones, was also investigated.     

Intramolecular Dynamics and Molecular Structure of Europium(III) Chelate Complexes with Crown Ethers as Studied by NMR Spectroscopy

Earlier the intramolecular inversion of the 18-crown-6 molecules was found in the complex ion pairs [Ln(ptfa)₂ (18-crown-6)]⁺ [Ln(ptfa)₄]⁻ (H₂O)₄ where Ln = La(1), Ce (2), Pr (3), Nd (4), and ptfa is 1,1,1-trifluoro-5,5-dimethyl-2,4-hexanedione. In this work the peculiarities of the molecular structure and dynamics were studied for [Eu(ptfa)₂ (18-crown-6)]⁺ [Eu(ptfa)₄]⁻ (H₂O)₄ (5) by NMR spectroscopy techniques. Through VT-NMR spectra analysis the temperature dependence was obtained for the rate constant. The free energy ΔG^‡(320) of 18-crown-6 ring inversion activation was found to be 65 ± 5 kJ mol⁻¹ for 5 in CDCl₃. This result is comparable with the earlier data [S.P. Babailov and D.A. Mainichev: J. Inclusion Phenom. Macrocyclic Chem. 43, 187–193 (2002)] for complexes 2, 3, 4 in deuterated toluene (ΔG^‡(320)=65 ± 9, 64 ± 9, 64 ± 9 kJ mol⁻¹ respectively). It was found by relaxation NMR spectroscopy that the effective distance between Ln and protons of the crown molecule is 4.5 ± 0.2 Å. The analysis of structural parameters testifies that the crown ether and chelated anions are in the first coordination sphere of a Ln cation. Obtained geometrical parameters show that the complex cations of Eu, Ce and Pr have similar spatial structures.This revised version was published online in July 2005 with a corrected issue number.     

Fe(Cp)2PF6: An efficient catalyst for cyanosilylation of carbonyl compounds under solvent free condition

An efficient method for the addition of trimethylsilyl cyanide (TMSCN) to various aldehydes and ketones has been described using Fe(Cp)₂PF₆ (2.5 mol%) as a catalyst under solvent free condition. Excellent yields of trimethylsilylether of cyanohydrin up to (94%) was achieved within 10 min.     

Free electron model in cluster structure theory. Electronic structures of [Mo6S8(CN)6]6?, [Mo6Se8(CN)6]6?, [Re6S8(CN)6]4?, and Rh6(CO)16 clusters

The results of quantum chemical calculations of the electronic structure and geometry of octahedral clusters [Mo₆S₈(CN)₆]⁶⁻, [Mo₆Se₈(CN)₆]⁶⁻, [Re₆S₈(CN)₆]⁴⁻, and Rh₆(CO)₁₆ by the ab initio SCF (RHF) and DFT (B3LYP) methods with various basis sets are presented. The electronic states of the clusters under study in ideal spherically symmetric potential were classified in the orbital quantum number l (1s, 1p, 1d, 1f, 1g, 1h, 1i), l = 0–6. In real crystal field with O_h symmetry these states are split. The calculated new electronic states were matched to the irreducible representations of the point symmetry group O_h. The polarizabilities of the compounds considered are 55–65 ų. A new model for the electronic structure of octahedral clusters containing M₆ groups was proposed. The model is based on the idea of free electrons moving in spherically symmetric potential field. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2617–2624, December, 2005.     

ZrO_2/S_2O_8~(2-)固体超强酸高效催化合成二芳砜化合物

报道了以ZrO_2／S_2O_8～(2-)固体超强酸为催化剂，在无溶剂条件下，依照 傅一克反应的原理，由芳香磺酰氯与芳香化合物作用合成了一系列二芳砜化合物， 收率为79％～93％．此方法具有操作简便，催化剂价廉易得、活性高、对环境友好 、可回收重复使用等优点．     

Cadmium colloids from non-aqueous solvents

Cadmium colloids have been prepared by Chemical Liquid Deposition (CLD). The metal is evaporated to yield atoms which are solvated at liquid nitrogen temperature, and upon warming, stable liquid colloids are formed with particle size ranging between 25–100 Å. Zeta potentials were calculated according to the conversion of Hunter and the Hückel equation, for ethanol and dimethyl sulphoxide. UV/VIS measurement of most of the black colloids showed absorption band around 280 nm. For comparison, we prepared CdS colloid with size 400–625 Å. The colloids are stable to oxidation in air and/or oxygen bubbling. The synthesis of colloids and films from Cd with acetone, 2-butanone, ethanol, 2-propanol, 2-methoxyethanol, DMF and DMSO is reported. Transmission Electron Microscopy (TEM) allows us to determine particle size.     

邻位吡啶自由基多通道分解反应的动力学和反应机理研究

Utilizing Gaussian94 program package, all species involved in decomposition reactions of o-pyridyl radical were optimized fully at B3LYP/6-311＋＋G^＊＊ level. Intrinsic reaction coordinate calculations were employed to confirm the connections of the transition states and products, and transition states were ascertained by the number of imaginary frequency （0 or 1）. The reaction mechanism was elucidated by the vibrational mode analysis and electronic population analysis, and the reaction rate constants were calculated with transition state theory.