Surface diffusion in reversed-phase liquid chromatography using silica gels bonded with C1 and C18 ligands of different densities

Surface diffusion in reversed-phase liquid chromatography (RPLC) using silica gels bonded with C₁ and C₁₈ alkyl ligands of different densities was studied from the viewpoints of two extrathermodynamic relationships, i.e., enthalpy-entropy compensation (EEC) and linear free energy relationship (LFER). First, according to the four methods proposed by Krug et al., the values of surface diffusion coefficient (D_s) were analyzed to confirm that an actual EEC resulting from substantial physico-chemical effects takes place for surface diffusion. Then, it was also demonstrated that a LFER is observed between surface diffusion and the retention equilibrium. The establishment of EEC and LFER suggests a mechanistic similarity of molecular migration by surface diffusion, irrespective of the alkyl chain length and the densities of C₁ and C₁₈ ligands. Finally, a thermodynamic model for the LFER based on the real EEC was used to estimate D_s values under various RPLC conditions. The D_s values can be estimated with a mean square deviation of about 25–30%. The agreement between the D_s values estimated and those experimentally measured suggests that the total mass flux by surface diffusion consists of the two contributions due to C₁ and C₁₈ ligands and that the contribution of each ligand is proportional to the ligand density.     

Probing in vitro digestion at oil–water interfaces

Interfacial layers have been widely applied to study the formation and stability of emulsion-based systems. However, the application of isolated interfaces to address digestibility of emulsions is often limited because of the complexity of experimental methods and results. This review summarizes the latest developments in analytical methods and literature data on effects of digestion on interfacial layers. Particular emphasis is given to understand the changes on interfacial magnitudes during oral, gastric, and duodenal digestion, either applied separately or sequentially. Limitations of interfacial aspects and key factors that influence emulsion microstructure in bulk and lipid digestion are identified. Understanding the behavior of interfacial layers upon gastrointestinal digestion promotes an accurate tracking of the physiological fate of emulsions.     

Selective method for the preparation of 5-chloropentan-2-one

A selective method for the preparation of 5-chloropentan-2-one by interaction of 1-methylcyclobutanol with Ca(OCl)₂ followed by decomposition of the hypochlorite thus obtained in the presence of Fe^II salt is proposed. The selectivity of the ketone formation from the alcohol is 98%, while the conversion of the alcohol is 35–40%.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 774–776, April, 1995.     

The physicochemical surface characteristics of Brevibacterium linens

The physicochemical surface characteristics and interfacial behavior of two strains of Brevibacterium linens (BL-MGE and BL-9174), that may enhance cheese flavor, were assessed. Cell surface hydrophobicity was determined by measuring the contact angle of a variety of polar and non-polar wetting agents on lawns of the bacterial cells. The contact angles obtained were used to calculate the cell surface free energy components γ^LW, γ^AB, γ⁺ and γ⁻. The Lifshitz van der Waals component and the Lewis acid-base component were approximately 35 mJ m⁻² and 22 mJ m⁻², respectively, for both strains. Under conditions of physiological pH and low ionic strength, neither strain exhibited affinity for an octyl ligand in hydrophobic interaction chromatography. This occurred despite a favorable free energy of interfacial interaction which was attributable almost entirely to favorable acid-base interactions between cells and octyl-sepharose. The nature of surface functional groups was evaluated using X-ray photoelectron spectroscopy. Excluding H, the mean percentage of atomic fraction for C, O, N and P for BL-MGE was 57.7, 37.8, 3.9 and 0.6%, respectively and 61.0, 31.8, 7.0 and 0.2%, respectively for BL-9174.     

流体熵相关性质的Monte Carlo模拟新方法

提出了用于计算实际体系熵相关性质的Monte Carlo多级取样分子模拟方法. 应用这一方法, 对硬球流体的化学势及Helmholtz自由能进行了估算, 得到了满意的结果. 计算化学势时, 不存在通常试验粒子方法所遇到的高密度问题. 该方法特别适合规律性的系统研究, 较之普通模拟方法要有效得多. 模拟得到的硬球体系无限稀释组份的超额化学势与对比直径的关系, 在相变区域为一条双凹曲线; 无论是在相变区还是在单相区, Carnahan-Starling公式对这一关系的描述均有较大偏差.     

定标粒子理论计算非水溶液的盐效应常数

本文应用定标粒子理论计算了非电解质溶质在盐(NaI、或KI)和环丁砜组成的非水电解质溶液中溶解度的盐效应常数。硬球作用项采用Masterton-Lee的方法。软球作用项采用胡英等的径向分布函数处理方法, 并考虑进了偶极-偶极、偶极-诱导偶极、电荷-偶极和电荷-诱导偶极等相互作用。分子的硬球直径σ和能量参数∈/k由经验方程计算。由理论值和实验结果比较得出: 当σ_2取0.563 nm、离子半径取电子密度标度时, 理论值与实验值符合得较好。     

微孔和介孔材料中的热化学

这篇论文综述了美国加州大学戴维斯分校科学院院士Navrotsky课题组多年来在多孔材料上取得的一系列热化学研究结果。讨论了热化学对微孔、介孔材料的结构稳定性和合成过程的影响。借助多种测热手段对影响骨架结构的热焓、热熵和自由能进行了系统的测量和计算。研究数据表明一系列纯硅分子筛、介孔材料和磷酸铝多孔材料同相应的石英相和块磷铝矿相相比能量上最多只高出15 kJ·mol-1。一系列纯硅分子筛的熵值比石英相高出3.2—4.2 J·K-1·mol-1；在0—12.6 J·K-1·mol-1范围内相对应的自由能几乎没有差别。因此，对不同微孔、介孔材料，其骨架结构在能量上是几乎没有区别的。另外，本文通过介绍一种新型测热方法——原位测热，揭示了分子筛合成过程中的动力学和成核/结晶机理。     

超声波处理对球形β-Ni(OH)2结构及电化学性能的影响

A method of ultrasonic treatment （UST） was first used to modify the structure and electrochemical performance of nickel hydroxide for the active material of nickel series alkaline batteries. The experimental results showed that UST was an effective method to improve the electrochemical performance of β-Ni（OH）2 such as specific discharge capacity, discharge potential, electrochemical reversibility and oxygen evolution over-potential. The results of electrochemical impedance spectroscopy, powder X-ray diffraction and particle size distribution indicated that the improvement of the performance of β-Ni（OH）2 through UST was attributed to the reduction of the charge-transfer resistance （Rt） and the diffusion impedance （Zw）, which resulted from the decrease of the crystallite and particle size and the increase of interlayer spacing. Diffusion coefficient of proton DH of ultrasonic treated β-Ni（OH）2 gained by CV tests was 1.13 × 10^-11 cm^2/s, and the average discharge specific capacity of ultrasonic treated β-Ni（OH）2 electrode was 301 mAh/g.     

Free energies of transfer of complexes of the type MCl2py4 between pyridine and other solvent media

Solubility isotherms are reported for the NiCl₂·4py, MnCl₂·4py, and MnCl₂·2py solid pyridinates in a number of pyridine+diluent mixtures at 25°C. Activity coefficients of the solvent components have been derived from the total vapor pressures measured by a static method. The standard free energies of transfer for the NiCl₂py₄ and MnCl₂py₄ complexes are the same, within the experimental error, in the pyridine+aprotic diluent mixtures, while marked differences are observed in the pyridine+chloroform mixtures. Marked deviations are observed for chloroform and 1,2-dichloroethane from a correlation between the standard free energy of transfer of the complexes, on one hand, and the Hildebrand's solubility parameter of the solvent, on the other, the latter correlation being roughly valid for aprotic solvents. The deviations are tentatively ascribed to hydrogen bond formation of the type H... between the protic solvents and the coordinated pyridine molecules, enhanced by the d electron delocalization.     

旋转输液管动力稳定性理论分析北大核心CSCD

基于Lagrange原理和假设模态法建立了旋转输液管的动力学模型.通过降阶升维的方法求解系统的特征值问题,并分析了旋转输液管自由振动特性.得到了不同端部集中质量和转速下,系统特征值随流速升高的演变轨迹.揭示了临界流速随系统参数的变化规律.研究发现,内部流体的流动对旋转输液管动力学特性存在显著影响.在某些参数组合下,系统低阶模态能够形成不同形式的内共振关系.预示了旋转输液管模型蕴含丰富的动力学现象.