An average fock operator technique of approximate open-shell LCAO-MO-SCF calculation

The exchange part of the usual Hartree-Fock potential in the unrestricted Hartree-Fock (UHF) theory is suitablyaveraged to construct an, average one-electron model Hamiltonian which generates a set of spin-restricted one-electron orbitals in a self-consistent manner. These orbitals are then used to calculate the electronic energy of the open-shell system by using the proper functional form for the energy which handles the exchange terms correctly. The eigenvalues ofF ^av can be used for calculating either the spin-polarised or spin-averaged ionisation potentials of different orbitals at theKoopmans’ theorem level of approximation. Comparison ofE ^ac with the UHF-energy shows thatE _UHF<E ^ac in each case revealing some kind of an upper bound nature ofE ^ac. An approximate variational argument is given. Relationship of our model with the hyper-Hartree-Fock theory of slater is explored and the general problem of eliminating ‘self-interaction’ terms in average Fock-operator based theories is discussed.     

An empirical equation-of-state for solid-fluid interfacial free energies

The contact angle,, formed by a liquid on a solid surface in air depends on the solid-air ( _S ), liquid-air ( _L ) and solid-liquid ( _SL ) interfacial free energies, as described by Young's equation. Critical examination of reported contact angles for numerous liquids and solids leads to an empirical correlation between _sL and both _Y and _S . Combination of this correlation with Young's equation gives an empirical relation allowing calculation of _S from _L and Calculations made with these empirical relations agree well with estimations of _S obtained by the method of critical spreading, and are consistent with Young's equation.Founded and supported by F. Hoffmann-La Roche and Co., Limited Company, Basel, Switzerland.     

电化学法测定几种稀土贮氢合金的热力学函数

贮氢材料由于能可逆地吸放氢,得到了广泛地应用.特别是以贮氢材料为负极制成的氢镍二次电池,容量为同类型镉镍电池的1.5～2倍,且电压又相近,是镉镍电池的理想换代产品,受到人们普遍的关注。LaNi_(4.5)Mn_(0.5),LaNi_(4.9)Sn_(0.1)和La_(0.8)Nd_(0.2)Ni_(2.5)Co_(2.4)Al_(0.1)是电化学性能较优越的贮氢合金。LaNi_(4.5)Mn_(0.5)的电化学容量高,理论容量可达400mAh.g~(-1).LaNi_(4.9)Sn_(0.1)和La_(0.8) Nd_(0.2)     

Reduced parabolic model for radical addition reactions

The transition state of addition of free radicals and atoms to multiple bonds is considered as a result of intersecting of two parabolic potential curves. One of them characterizes the stretching vibration of the attacked multiple bond, and another curve characterizes the stretching vibration of the bond formed in the transition state. The force constant of the latter is calculated by an empirical equation that correlates the force constant with the bond dissociation energy. In the framework of this model, the thermally neutral activation energy (E _e0) and the elongation of the attacked and formed bonds (r _e) in the transition state were calculated from the experimental data (activation energy (E _e) and enthalpy of reaction (H _e)) for the addition of an H atom and methyl, alkoxyl, aminyl, triethylsilyl, and peroxyl radicals to the C=C bond and the addition of H and CH₃ to the C=O and CC bonds. Analysis of the data obtained showed that E _e0 depends linearly on the |H _e| + E_e sum, i.e., E_e0/kJ mol^–1 = 14.2 + 0.61 · (E_e – H _e), and the bond elongation in the transition state for addition of the most part of radicals to ethylene and acetylene vary within (0.65–0.87)·10_–10 m. The factors affecting the activation energy of the radical addition reactions are discussed.Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1542–August, 2004.     

ITSTUDIES ON THE EFFECT OF UREA ON THE COMPATIBILITY OF PMMA/PVC MIXTURES IN DMF BY A DILUTE- SOLUTION VISCOMETRY METHOD

The interaction between poly(methymethacrylate) (PMMA) and poly(vinyl chloride) (PVC) has been studied indilute urea solutions of dimethylformamide (DMF) at 28℃ using a dilute solution viscometry method. The results show thatthe polymer mixtures are compatible in DMF solution in the absence of urea. The influence of urea addition on the degree ofcompatibility of the polymer mixtures has been studied in terms of the compatibility parameters (△b_m and △[η]_m). It wasfound that the compatibility of the polymer mixtures is decreased with increasing urea addition, passing through a minimumat 0.5 M urea.     

Overwhelming electrochemical oxygen reduction reaction of zinc-nitrogen-carbon from biomass resource chitosan via a facile carbon bath method

Developing high efficiency and low cost electrocatalysts is critical for the enhancement of oxygen reduction reaction (ORR), which is the fundamental for the development and commercialization of renewable energy conversion technology. Herein, zinc-nitrogen-carbon (Zn-N-C) was prepared by using biomass resource chitosan via a facile carbon bath method. The obtained Zn-N-C delivered a high specific surface area (794.7 cm²/g) together with pore volume (0.49 cm³/g). During the electrochemical evaluation of oxygen reduction reaction (ORR), Zn-N-C displayed high activity for ORR with an onset potential E₀ = 0.96 V_RHE and a half wave potential E_1/2 = 0.86 V_RHE, which were more positive than those of the commercial 20 wt% Pt/C benchmark catalyst (E₀ = 0.96 V_RHE and E_1/2 = 0.81 V_RHE). In addition, the Zn-N-C catalyst also had a better stability and methanol tolerance than those of the Pt/C catalyst.     

Phase transition of polycarbonate in blends with liquid crystal

Phase transition temperatures of polycarbonate film consisting of micron-sized liquid crystalline droplets were investigated using differential scanning calorimetry (DSC) and thermo-optical analysis (TOA) methods. Both a decrease in (T _g ) and (T _m ) of the polycarbonate with an increase of liquid crystal (LC) content in the sample were observed. The decrease ofT _g is related to the plastifying effect of a low molecular weight LC substance remaining soluble in the polycarbonate matrix. A fraction of the liquid crystal contained in the droplets was estimated on the basis of theT _g decrease.     

Use of cluster expansion techniques in quantum chemistry. A linear response model for calculating energy differences

In this paper we have reviewed the theoretical framework of the coupled-cluster (cc) based linear response model as a tool for directly calculating energy differences of spectroscopic interest like excitation energy (ee), ionisation potential (ip) or electron affinity (ea). In this model, the ground state of a many-electron system is described as in a coupled cluster theory for closed shells. The electronic ground state is supposed to interact with an external photon field of frequencyw, and the poles of the linear response function as a function ofw furnish with the elementary excitations of the system. Depending on the general form of the coupling term chosen, appropriate difference energies like ee, ip or EA may be generated. Pertinent derivations of the general working equations are reviewed, and specific details as well as approximations for ee, ip or ea are indicated. It is shown that the theory bears a close resemblance to the equation of motion (eom) method but is superior to the latter in that the ground state correlation is taken to all orders and may be looked upon as essentially a variant of renormalisedtda. A perturbative analysis elucidating the underlying perturbative structure of the formulation is also given which reveals that the theory has a hybrid structure: the correlation terms are treated akin to an open shellmbpt, while the relaxation terms are treated akin to a Green function theory. A critique of the methodvis-a-vis other cc-based approaches for difference energies forms the concluding part of our review.     

UO22＋•nH2O和PuO22＋•nH2O (n＝2, 4, 5, 6)密度泛函理论研究

首先用密度泛函理论(DFT)方法研究了铀酰和钚酰离子的几何与电子结构, 计算结果与实验基本符合, 表明DFT方法也能用于含铀和钚重原子的化合物计算. 然后对铀酰和钚酰水合离子的几何构型、Mulliken集居数分布以及铀酰(钚酰)与配体水分子的结合能进行计算, 计算结果表明UO₂^2＋•5H₂O和PuO₂^2＋•5H₂O分别为铀酰和钚酰系列水合离子中最稳定的配合物.     

溶胶-凝胶法制备还原态K-Co-Mo催化剂的合成醇性能

应用溶胶-凝胶法制备了还原态K-Co-Mo催化剂, 比较了不同的组分和不同的反应条件对合成醇性能的影响。实验结果表明，适量钾和钴助剂的添加能显著提高催化剂合成醇的性能，尤其是提高了C2+醇的选择性。此外，反应温度、压力以及空速对合成醇影响明显，升高温度可以提高催化反应中低碳醇的收率，但选择性下降；增加压力和空速可以提高低碳醇的收率和选择性，对合成低碳醇有利。在230 ℃，6.0 MPa，14 400 h－1条件下，催化剂合成低碳醇的收率为375.4 g/kg·h，选择性为70.2%，C1OH/C2+OH为0.48。