TiZSM—48型分子筛的快速合成及性能

在Na_2O-1.6-C_6H_(14)N_2-SiO_2-TiO_2-H_2O体系中首次用快速动态法和静态法合成了TiZSM-48型分子筛,考察了两种合成方法的晶化动力学。利用XRD、IR、XPS、SEM、DRS、TG-DTA等测试手段对TiZSM-48型分子筛进行了表征,结果表明,Ti进入了分子筛骨架,动态法合成比静态法合成快得多,且样品的晶粒较小。热分析表明,两种方法合成的样品热稳定性均较好。     

目视催化褪色计时法测定超痕量钒的研究

本文基于在酸性介质中钒(V)催化溴酸钾氧化酸性铬蓝K褪色的新指示反应,建立了一个催化褪色计时法测定超痕量钒的新方法。在体系中引入活化剂抗坏血酸,灵敏度达2×10~(-12)ng/ml,测定范围在0.0l～3.0ng/ml,同时探讨了反应机理。确立了反应速率方程,方法简便经济,已用于天然水中痕量钒的测定。     

Impact of electron-electron interaction on the electron energy distribution function in molecular plasmas under rf field action

Calculations of the electron energy distribution and of relevant macroscopic quantities of collision-dominated, weakly ionized plasmas under rf field action have been performed with increasing degrees of ionization, and the impact of the electron-electron interaction on these quantities was determined. The investigations were performed for the gas plasmas in CO and H₂ as representatives of molecular plasmas The energy distribution and macroscopic quantities are obtained by solving the nonstationary Bolizmann equation for a given rf field and degree of ionization taking into accoung and additional Fokker-Planck term besides the collision integrals for the elastic and the main inelastic collision processes. In these molecular plasmas a remarkable impact of the electron-electron interaction connected with increasing Maxwellization is observed for degrees of ionization greater than 10.     

环己硅烷类液晶化合物的量子化学研究

运用AM1和PM3两种SCF-MO方法，通过能量梯度全优化计算，给出20种环己硅烷类（苯基乙烷系）液晶化合物的稳定几何构型、电子结构和基本性质．联系有机电子结构理论进行了细致的讨论．     

Influence of channeling effects on ion distribution and damage profiles during high energy ion implantation in Si

Nitrogen implantation has been performed in silicon [001] crystals in carefully controlled alignment conditions. The channeling effects are clearly evident when implanting in [001] and [011] directions at energies ranging from 0.6 to 1.4 MeV. Both ion distribution and damage profiles are strongly influenced by channeling effects during ion implantation. The angular region around the [001] direction has been also investigated by implanting at small angles with respect to the axis. The same kind of study has been performed by implanting at different angles with respect to the planar (011) direction. The ion distributions (investigated by SIMS) show a strong dependence upon the alignment conditions. Moreover in high energy ion implantation, the lattice damage is located deep inside the crystal, leaving the surface layer almost unperturbed. The channeling effects on the damage production have been investigated by double crystal diffraction (DCD) in the low-dose regime and by RBS-channeling experiments (after implantation at doses greater than 1 × 10¹⁵ cm^–2) and for different ion alignment conditions.A big increase in the ion ranges and a strong reduction in the lattice damage is evident when implanting along major crystal axes. No saturatíon of the lattice damage and of the channelled component of the beam has been detected if the implantation is performed parallel to the [011] axis.     

配合物形成的三维超分子体系—[Ni(C_6H_4O_2N)_2(H_2O)_4]的水热法合成、晶体结构及热分析

采用水热法用Ni(NO3)26H2O和异烟酸制备出了一种新的由配合物形成的三维超分子体系—[Ni(C6H4O2N)2(H2O)4],并通过X射线衍射对其晶体结构进行了测定。 该晶体属三斜晶系,空间群为Pī, 所得晶胞参数为: a = 6.9228(4), b = 9.6664(19),c = 6.322(1) , a = 96.86(3), b = 113.33(3), g = 110.35(3)°, V = 347.6(1) 3, Z = 1, Mr = 374.98, Dc = 1.791 g/cm3, F(000) = 194, m = 1.443 mm-1。用1362个可观察的 (I > 2s(I))衍射点,修正123个结构参数, 最终偏离因子R = 0.0444,wR = 0.1271。在组成该化合物的基本结构单元[Ni(C6H4O2N)2(H2O)4]中,Ni处于1个稍微拉长的八面体的中心; 各个结构单元之间通过氢键OH…O相互连接,形成了无限伸展的具有层状结构的三维超分子体系。 另外,从差热及热重曲线可以看出,该化合物加热到154 ℃时开始分解, 首先失去4个H2O,再失去2个异烟酸根,最后残余物为NiO。     

Transition state geometry in radical abstraction reactions: comparison of interatomic distances in the intersecting parabolas and Morse curves models with quantum-chemical calculations

Interatomic distances in the transition state were estimated for the reactions of radical abstraction: H^· + H₂, H^· + HCl, H^· + CH₄, N^·H₂ + NH₃, HO^· + H₂O, HO₂ ^· + HOOH, and C^·H₃ + SiH₄. The calculation was performed by the quantum-chemical density functional method or coupled clusters method (QCH), as well as by the methods of intersecting parabolas (IPM) and Morse curves (IMM), using experimental data (activation energies and reaction enthalpies). The results of the latter two methods are close to the quantum-chemical calculation and differ only by the increment a: r(IPM or IMM) = a + r(QCH), where a = –4.5·10^–12 m for IPM and a = +1.9·10^–12 m for IMM.     

Application of symplectic algorithms to QCT calculation:H+H_2 system

The basic theory of symplectic algorithm was introduced. A comparison between Runge-Kutta method and symplectic integration method was preformed in the simulation of the long time behavior of H + H2 system on BKMP potential energy surface. Our results reveal a dis-sipative behavior in the integral of ordinary differential equation by the fourth order Runge-Kutta method, which causes incorrect simulation results in QCT calculations. However, when the symplectic integration method is applied, the dissipative behavior is not found in the same system. When the initial state is the same, the energy deviation of fourth order symplectic integral method is almost one percent of that of fourth order Runge-Kutta method in a 60000-step simulation, and that of sixth order symplectic integral method is much less. These results show that the symplectic integral methods are always the better choice in the integral calculation of the long time behavior in maintaining energy conservation.     

沉淀法合成纳米晶长余辉材料Y2O2S∶Eu3+，Ti

The long-lasting phosphorescent materials, yttrium oxysulfides doped by Eu and Ti, were systhesized by coprecipitation with their subsequent thermal decomposition in the presence of sulphur. The products were characterized by XRD, TEM, phosphorescent spectra, and thermoluminescence. The XRD results indicate that the lowest synthesis temperature is 700 ℃. From the TEM, the average diameter of particles was in the range of 60～120 nm, and augmented with the increase of temperature. The materials under UV excitation presented well afterglow from the transition of ⁵D_0,1 → ⁷F_J of Eu³⁺, and the persistent time was about 2 h. The long-lasting afterglow mechanism was discussed, too.     

白术挥发油中苍术酮氧化反应的动力学

白术挥发油;苍术酮;动力学方程;活化能;反应机理