Contemplation on Detonation Pressures of Nitramines and ­Nitro Aromatics

A physical model and a mathematical theory for the detonation pressures of explosives materials were developed. The pressure values are expressed as function of the detonation velocity (D) and the average mass (m) of the gaseous products, and are applied for various nitramines and aromatic nitro compounds including nitro pyrimidines and nitro triazines. Some regression equations were obtained and discussed. The pressure values show poor linear dependence on the average mass of the products but good dependence on the detonation velocities alone or Dm. Moreover, for the same Dm value nitramines should produce more pressure than aromatic nitro compounds. This work deals with pressure developed by explosion products and interrelates it with detonation pressure within the constraints of certain assumptions and pays attention to so far unnoticed relationships at least under certain circumstances.     

Significance of Photosensitized Oxidation of Alkanes During the Photochemical Degradation of Petroleum Hydrocarbon Fractions in Seawater

Abstract

A crude oil hydrocarbon fraction was photooxidized as a surface film on seawater under simulated environmental conditions. After irradiation, gas chromatography and gas chromatography/mass spectrometry analyses allowed to demonstrate the presence of relatively high quantities of compounds deriving from the photosensitized oxidation of n-alkanes, pristane and phytane, being among the non-acidic photoproducts of this fraction. The results suggest that the photochemical degradation of alkanes should be considered in studies of the fate of petroleum crudes in the marine environment.     

Increased Flexibility in Multicolumn Chromatography (MC[sbnd]HPLC) via On-line Effluent Mixing Technique

Abstract

In continuation of our work dealing with multicolumn HPLC (MC[sbnd]HPLC) we describe in this paper an on-line on-column fraction trapping technique based on effluent mixing.

To a normal two-column switching set-up (in this case with two RP columns) an additional high-pressure pump gets inserted into the connection line between column A and column B via a low dead volume mixing tee. The in-line respectively off-line switching of pump B and the mobile phase B is time controlled by using a high pressure switching valve. With this set-up it is possible to mix on-line an effluent fraction from column A and transferred onto column B with a highly polar and pH-controlled (e.g. aqueous buffer) new effluent, to reduce or adjust significantly the overall elution strength of this mixed transferred solvent. Thus, several chromatographically effective possibilities can be created in a simple manner, which are for example: (a) pronounced peak compression respectively on-column concentration on column B; (b) due to low elution strength and/or pH adjustment during the trapping period on column B, increments to the overall selectivity of the column switching set-up can be added creating multidimensionality via mobile phase switching; (c) combining the heart cut with the effluent mixing technique enables analysis of trace peaks eluted on the back flank of an overloaded main peak.     

浅海波导界面对点源振速方向的影响

采用“虚源法”分析计算了浅海波导环境中接收点处点源总振速方向与水平面夹角,侧重讨论确定性界面反射对总振速方向的影响。研究结果表明：总振速方向和接收点与声源的水平距离、两者深度,海底、海面特性以及声速剖面等有关。在等声速均匀浅海波导中,由于确定性界面反射的影响,当直达声掠射角为1°～50°时,合成总振速方向偏离直达声方向达1.5°～10.5°,声速剖面呈负梯度时,偏离程度更甚.     

Recombination analysis of autosomal short tandem repeats in Chinese Han families

Recombination fractions between forensic STRs can be extrapolated from the International HapMap Project, but the concordance between recombination fractions predicated from genetic maps and derived from observation of STR transmissions in families is still ambiguous for autosomal STRs because of limited family studies. Therefore, the main goal of this study is to compare recombination fractions estimated by pedigree analysis with those derived from HapMap phase SNP data. Genotypes of nine autosomal STR pairs (TPOX‐D2S1772, D5S818‐CSF1PO, D7S3048‐D7S820, D8S1132‐D8S1179, TH01‐D11S2368, vWA‐D12S391, D13S325‐D13S317, D18S51‐D18S1364, and D21S11‐PentaD) from 207 two‐generation families with two to five children (the number of families with five, four, three, and two children was 2, 3, 20, and 182, respectively) were used to analyze the recombination. The linkage analysis showed that significant linkage was observed at six STR pairs (D5S818‐CSF1PO, D8S1132‐D8S1179, TH01‐D11S2368, vWA‐D12S391, D13S325‐D13S317, and D18S51‐D18S1364) with genetic distances <36.22 cM in HapMap. Their recombination fractions calculated from family data were very close to those derived from HapMap. However, three STR pairs of TPOX‐D2S1772, D7S3048‐D7S820, and D21S11‐PentaD showed no significant linkage with genetic distances from 43.38 to 91.49 cM. Our results indicate that recombination fractions extrapolated from HapMap can provide a substitute if empirical data are unavailable for the linkage STR pair with a genetic distance spanned <36.22 cM.     

High Temperature Corrosion Resistance of Coatings Deposited by Hvof for Application in Steam Turbines

The geothermal steam turbines are exposed to mechanisms of corrosion/erosion that weakens its components and reduces their useful life. Due to this problem work has been done in application and characterization of coating in solid state by means of the technique of high-velocity Oxygen Fuel (HVOF), evaluating the corrosion rate (V_corr) at high temperature of MCrAlY and Diamalloy 4006 coatings deposited on stainless steel SS304. Test was performance in an Autoclave at 170 ⁰C using a modified geothermal fluid as electrolyte. Open circuit potential was monitoring during 24 hours until the system reached the equilibrium. After that, Polarization and Impedance Spectroscopy techniques were used to evaluate the specimens. For microstructure characterization; X–ray Diffraction (XRD), electron sweep microscope (SEM) and Optical microscope were applied. Results show that both coatings (Diamalloy 4006 and MCrAlY), have low current density compare with the substrate, which is an indicative of a lower corrosion rate due to the passive behavior of the species deposited on the Surface of the coating.     

Approximate analytic expressions for the diffusiophoretic velocity of a spherical colloidal particle

The general expression is derived for the diffusiophoretic velocity of a spherical colloidal particle of radius a in a concentration gradient of symmetrical electrolyte. On the basis of this expression, simple approximate analytic expressions for the diffusiophoretic velocity correct up to the order of 1/κa is derived, where κ is the Debye-Hückel parameter. It is found that the approximate expression correct to order unity can be applied for κa ≥ 50 with negligible errors, while the approximate expression correct to order 1/κa can be applied for κa ≥ 20 with negligible errors.     

双分散颗粒体系在临界堵塞态的结构特征

堵塞行为是颗粒体系中一种常见的现象,其力学性质与堆积结构的关联非常复杂.本文采用离散元法研究了由两种不同半径颗粒组成的二维双分散无摩擦球形颗粒体系在临界堵塞态所呈现的结构特征,讨论了大小颗粒粒径比与大颗粒百分比对临界堵塞态的影响.数值模拟结果表明,当粒径比小于1.4时,临界平均接触数与大颗粒百分比关系不大,当粒径比大于1.4时随着大颗粒百分比的增大临界平均接触数先减小再增大.而临界体积分数在粒径比小于1.8时随着大颗粒百分比的增加先减小后增大,大于1.8时又基本不随大颗粒百分比而变化.大颗粒百分比在接近0或1时,系统近似为单分散体系,临界平均接触数与体积分数基本不随半径比的增大而变化;在接近0.5时,临界平均接触数随着半径比的增大逐渐减小,而临界体积分数则是先减小后增大.文中对大-小颗粒这一接触类型的百分比也进行了探讨,其值随着大颗粒百分比的增大呈二次函数的变化趋势,粒径比对这一变化趋势只有较小的影响.     

Negative refraction and imaging of acoustic waves in a two-dimensional square chiral lattice structure

The negative refraction behavior and imaging effect for acoustic waves in a kind of two-dimensional square chiral lattice structure are studied in this paper. The unit cell of the proposed structure consists of four zigzag arms connected through a thin circular ring at the central part. The relation of the symmetry of the unit cell and the negative refraction phenomenon is investigated. Using the finite element method, we calculate the band structures and the equi-frequency surfaces of the system, and confirm the frequency range where the negative refraction is present. Due to the rotational symmetry of the unit cell, a phase difference is induced to the waves propagating from a point source through the structure to the other side. The phase difference is related to the width of the structure and the frequency of the source, so we can get a tunable deviated imaging. This kind of phenomenon is also demonstrated by the numerical simulation of two Gaussian beams that are symmetrical about the interface normal with the same incident angle, and the different negative refractive indexes are presented. Based on this special performance, a double-functional mirror-symmetrical slab is proposed for realizing acoustic focusing and beam separation.