声波团聚净化尿素造粒塔尾气实验研究*

尿素造粒塔大多采用水洗工艺处理尾气粉尘,存在较为严重的细颗粒粉尘溢出和水汽拖尾问题,因此深入探究声波团聚技术在造粒塔尾气处理方面的应用。通过实验研究了声波与喷雾对除尘效率的影响,发现声波单独作用时在3500 Hz达到最佳除尘效率,为74.49%,协同喷雾时2600 Hz即可实现相近的除尘效率,为73.83%。进一步探究其中机理,采用以粒径测试为依据的团聚效率作为评价指标,结果显示,2600 Hz声波与喷雾单独作用时团聚效率分别为30.37%和28.82%,协同作用时团聚效率大幅提升至57.95%。该研究可为后续造粒塔工程改造提供理论与数据支持。     

大钟拍声的调整实验

阐明大钟拍声的发生原理,并用大钟振动拍的理论模型说明拍的特性,从而控制清晰度。在实验钟上附着质量,根据附着质量位置的不同,能够改变其非对称程度,进一步调整拍频,同时用有限元分析的结果和等效圆环理论计算的结果对比。引入等效圆环理论,通过建立一个理论上带有附加质量的轴对称圆环模型,达到具有和大钟相同的振动特性。根据模型,得到在大钟特定位置附加的质量,以同时调整所需拍的清晰度和周期。在大钟多个位置进行实验,并进行有限元分析,验证了该理论的有效性。     

Distinguishable RGE Running Effects Between Dirac Neutrinos and Majorana Neutrinos with Vanishing Majorana CP-Violating Phases

In a novel parametrization of neutrino mixing and in the approximation of т-lepton dominance, we show that the one-loop renormalization-group equations (RGEs) of Dirac neutrinos are different from those of Majorana neutrinos even if two Majorana CP-violating phases vanish. As the latter can keep vanishing from the electroweak scale to the typical seesaw scale, it makes sense to distinguish between the RGE running effects of neutrino mixing parameters in Dirac and Majorana cases. The differences are found to be quite large in the minimal supersymmetric standard model with sizable tanβ, provided the masses of three neutrinos are nearly degenerate or have an inverted hierarchy.     

高频聚焦超声声场和温度场的仿真研究*

为探究临床常用的7 MHz高频聚焦超声在多层生物组织中的声传播以及毫秒级时间内的生物传热规律问题,基于Westervelt方程和Pennes传热方程,使用有限元方法建立高频聚焦超声辐照多层组织的非线性热黏性声传播及传热模型。首先分析了线性模型和非线性模型之间的差异,然后在非线性模型下探究换能器的参数对声场和温度场的影响。仿真结果显示：在7 MHz频率下,当换能器输出声功率超过5 W时,声波传播的非线性效应不可忽视(p <0.05);当声功率从5 W增大到15 W时,非线性模型与线性模型预测的温度偏差从20%增加到34.703%;高频聚焦超声波的非线性行为比低频更加显著,基频能量向高次谐波转移的程度增大,声功率为10 W和15 W时4次谐波与基波之比分别达到7.33%和12.12%;高频换能器参数的改变对组织中声场和温度场分布的影响较大,换能器焦距从12 mm减小到11.2 mm,焦点处最高温度增加了77%。结果表明,7 MHz聚焦超声的非线性声传播需要考虑到4次谐波的影响。该文提出的多层组织非线性仿真模型可为高频聚焦超声换能器参数优化及制定安全、有效的术前治疗方案提供理论参考。     

Pressure-Dependent Base-Wavefunction Admixture and Lifetime of R1 State of La3Lu2Ga3O12:Cr3+

As a key factor leading to the pressure-dependent R₁-line-shift reversal and R₁-state lifetime, at 10 K, the pressure-dependent variation of mixing-degree of |t₂²(³T₁)e⁴T₂〉 and |t₂³² E〉base-wavefunctions in the wavefunction of R₁ state of LLGG:Cr³⁺ has been calculated and analyzed. From this, the physical origin of the pressure-dependent R₁-line-shift reversal has been revealed. Furthermore, by using the pressure-dependent values of the sum of all square mixing-coefficients of |t₂²(³T₁)e⁴T₂〉in the wavefunction of R₁ state, the lifetimes of R₁ state of LLGG:Cr³⁺ at various pressures have been calculated, which are in good agreement with observed results. The quantum anticrossing effect between t₂³²E and t₂²(³T₁)e⁴T₂ levels due to both spin-orbital interaction and electron-phonon interaction is remarkable, which is related to the admixture of |t₂²(³T₁)e⁴T₂〉and |t₂³² E〉as well as the low-high crystal-field transition.     

Supernovae and the Arrow of Time

Supernovae are explosions of stars and are a central problem in astrophysics. Rayleigh–Taylor (RT) and Richtmyer–Meshkov (RM) instabilities develop during the star’s explosion and lead to intense interfacial RT/RM mixing of the star materials. We handle the mathematical challenges of the RT/RM problem based on the group theory approach. We directly link the conservation laws governing RT/RM dynamics to the symmetry-based momentum model, derive the model parameters, and find the analytical solutions and characteristics of RT/RM dynamics with variable accelerations in the linear, nonlinear and mixing regimes. The theory outcomes explain the astrophysical observations and yield the design of laboratory experiments. They suggest that supernova evolution is a non-equilibrium process directed by the arrow of time.     

Effect of Ion and Binding Site on the Conformation of Chosen Glycosaminoglycans at the Albumin Surface

Albumin is one of the major components of synovial fluid. Due to its negative surface charge, it plays an essential role in many physiological processes, including the ability to form molecular complexes. In addition, glycosaminoglycans such as hyaluronic acid and chondroitin sulfate are crucial components of synovial fluid involved in the boundary lubrication regime. This study presents the influence of Na+, Mg2+ and Ca2+ ions on human serum albumin–hyaluronan/chondroitin-6-sulfate interactions examined using molecular docking followed by molecular dynamics simulations. We analyze chosen glycosaminoglycans binding by employing a conformational entropy approach. In addition, several protein–polymer complexes have been studied to check how the binding site and presence of ions influence affinity. The presence of divalent cations contributes to the decrease of conformational entropy near carboxyl and sulfate groups. This observation can indicate the higher affinity between glycosaminoglycans and albumin. Moreover, domains IIIA and IIIB of albumin have the highest affinity as those are two domains that show a positive net charge that allows for binding with negatively charged glycosaminoglycans. Finally, in discussion, we suggest some research path to find particular features that would carry information about the dynamics of the particular type of polymers or ions.     

铷原子中参量六波混频和量子拍的研究

在铷原子中实现了轴向相位匹配的参量六波混频,并探测到位于红外光谱区的六波混频信号.六波混频信号与泵浦激光进行和频,产生了位于可见光范围内的可调谐的和频信号,并从和频信号中观察到频率为608 cm 1的量子拍.结果表明,六波混频信号中的量子拍能够用于研究原子和分子的相干特性.     

β-榄香烯振动光谱的量子化学从头计算

利用G98及GAMESS从头计算程序的RHF／6－31方法,对β－榄香烯的全部振动基频作了计算,并与实测红外光谱做了对比,归属了它们的振动模式,讨论了它们的特征基频,并对理论计算的振动频率进行了标度校正。     

Autoradiographische Untersuchungen zur Vermisechung von Baustoffkomponenten

Die Feinverteilung des Kalkes im Kalk-Quarzsand-Gemisch ist eine notwendige Bedingung fur hohe erreichbare Festigkeit der Silikatbaustoffe. Vergleiehende Untersuchungen über die Kalkverteilung an neutronenaktivierten feinkörnigen Baustoffproben mit Hilfe von Szintillationsmessungen des ⁴⁷Ca-Gehaltes und mittels autoradiographischer Darstellung der Kalkverteilung in kleinen Prüfkörpern unter Ausnützung der relativ weichen β-Strahlung des ⁴⁵Ca ergaben, daβ die autoradiographischen Aussagen über die Homogenität der Proben am besten mit den Festigkeitsiwerten der Prüfkörper korrespondieren.